PETROBOWL UPDATED ACTUAL QUESTIONS AND CORRECT ANSWERS

PETROBOWL UPDATED ACTUAL QUESTIONS AND
CORRECT ANSWERS

Question:
1. Name one of the four corrosion types that are listed in group 3 by Nace AND described as verification is
usually required by microscopy
Answer:
environmental cracking, stress corrosion cracking, other L

Question:
2. What is the recommended simulation Grid for defining faulting more precisely?
Answer:
corner point grid L

Question:
3. API recommended practice 12 B refers to which standard relevant for oil storage ?
Answer:
specification for bolted tanks for storage production liquid. L

Question:
4. This Is a nondestructive inspection procedure for detecting surface cracks in welded areas through the
use of fine iron particles in an electrical field. Name it.
Answer:
magnetic particle inspection (mpi) L

Question:
5. What Is the most commonly used material for piping systems in produced-water treatment.
Answer:
carbon steel L

Question:
6. Who Is the editor of volume three "facilities AND construction engineering" of the petroleum
engineering handbook published in 2007?.
Answer:
Kenneth Arnold. L

Question:
7. What is the name of the full sized length of casing placed at the bottom of the casing string that is
usually left full of cement on the inside to ensure that good cement remains on the outside of the bottom of
the casing?.
Answer:
shoe track L

,Question:
8. What is the drilling problem when rate of penetration drops without any parameters changes, bottom
pressure increases without changes Is flow rate, drilling torque Is lower than normal at the same weight on
bit applied.
Answer:
bit boiling L

Question:
9. In the context of data science & engineering analytics, the phrase "discovering complex patterns in data"
by professor Shahab Mohaghegh is used to describe what ?
Answer:
Machine Learning. L

Question:
10. Name a formation encountered during drilling into which circulating fluids can be lost.
Answer:
thief zone L

Question:
11. In a safety related context... What does the abbreviation H-S-Z-M-A-T refer to?
Answer:
hazardous materials P

Question:
12. In tertiary Covering, there is a type of chemical compound used to reduce Interfacial Tension between
Answer:
Surfactants P

Question:
13. In the context of gaslift Valves, what does I-P-O and P-P-O stand for
Answer:
Injection pressured Operated and Production pressured operated P

Question:
14. In the context of Petroleum Economics, What does the abbreviation NPV means
Answer:
net present Value P

Question:
15. In the context of Petroleum Refining, Name one Thermochemical conversion use to treat vacuum
Residue
Answer:
Thermal cracking / Visbreaking / Coking P

Question:
16. Name at least one of the main oil trust international companies originally exploiting oil fields in
Argentina at the time when regulations were established to promote national industry.

, Answer:
Standard Oil / Royal Dutch Shell P

Question:
17. Name one criterion commonly used to classify Carbonated Sedimentary
Answer:
Carbonate Chemistry P

Question:
18. Name standard basic cutoff in porosity used to determine interest in a certain navigation level in
unconventional reservoirs.
Answer:
3% P

Question:
19. Name 2 out of 5 fluid systems that are used in underbalanced
Answer:
Mist and Gas P

Question:
20. Oil-based fluids and synthetic-based fluids are also known as
Answer:
Inverted emulsion Systems P

Question:
21. Sonic density and neutral loss are categorized
Answer:
Porosity Loss P

Question:
22. To protect a Buried Pipeline Against external corrosion, What protection is applied
Answer:
Cathodic protection P

Question:
23. What are the two fundamental components of a multi-stage centrifugal pump?
Answer:
Impeller and diffuser P

Question:
24. What does the acronym IEA stand for?
Answer:
International Energy Agency P

Question:
25. What is defined as an open hole section larger than the original hole size or Size