STSC EXAM STUDY CARDS WITH COMPLETE SOLUTIONS 100%
VERIFIED 2026 UPDATE!! ALREADY GRADED A+
STSC - (ANSWER)Safety Trained Supervisor in Construction
OHSMS - (ANSWER)Occupational Health and Safety Management Systems
Management Leadership - (ANSWER)Establish clear safety and health objectives for the OHSMS and
operationally define the actions needed to achieve those objectives
When in use, electrical power tools and cords must: - (ANSWER)Make use of ground fault circuit
interrupters or be a part of an assured grounding conductor program
If a supervisor is given authority by the general manager to stop operations site whenever he or she
observes an imminent danger situation. The following correctly identifies that authority... -
(ANSWER)Functional authority
A certified Safety Trained Supervisor is expected to... - (ANSWER)seek methods to improve your
knowledge and understanding of methods, techniques and practices for protection of workers. STS Code
of ethics
Arrange the following hazard control steps in the most appropriate sequence: (1) guard hazard, (2)
engineer out hazard, if possible, (3) educate personnel - (ANSWER)2-engineer out the hazard if possible,
1-guard hazard, 3-educate personnel
Which action is preferred when dealing with minor infractions of work safety rules? Oral reprimand,
Written reprimand, No response or consequence, suspension - (ANSWER)Oral reprimand
System safety analysis can be applied to... - (ANSWER)Any system that has interacting components
What should a supervisor do when a crew must walk across an area with open floor holes to go to their
work area? - (ANSWER)Have the floor holes covered and inform crew of load surface restrictions
,STSC EXAM STUDY CARDS WITH COMPLETE SOLUTIONS 100%
VERIFIED 2026 UPDATE!! ALREADY GRADED A+
The strongest motivator, according to contemporary motivation theory is... - (ANSWER)Recognition of
achievement for performance
Management has increased work hours and is punishing for more productivity. As STS, you are
concerned about some of the safety risks associated with this production schedule. You should... -
(ANSWER)Inform/communicate increased hazards due to increased production and verify that risk is
acceptable
The best evaluation of tasks descriptor involving steps, hazards and solutions is... - (ANSWER)Job Safety
Analysis (JSA)
What minimum PPE is required for a worker in a grinding operation... - (ANSWER)Eye and face protection
Minimally,_______authorized attendant(s) shall be on duty outside of the space during permit required
confined space operations and shall be responsible for securing immediate aid, keeping an accurate
count of entrants in case of emergency. - (ANSWER)One
A medical questionnaire required when safety workers place an employee in respiratory protection must
be evaluated by whom? - (ANSWER)A licensed health care professional aka (PLHCP) physician or other
licensed health care professional
In construction, each employee on a walking/working surface (horizontal and vertical surface) with an
unprotected side or edge which is _______feet or more above a lower level shall be protected from
falling by the use of guardrail systems, safety net systems or personal fall arrest systmes - (ANSWER)6
feet
A crew member deliberately violates a safety procedure. What should be done? - (ANSWER)Stop work,
write formal complaint and explain
Each employee on a scaffold more than_____feet above a lower level shall be provided with fall
protection to prevent from falling to a lower level - (ANSWER)10 feet
, STSC EXAM STUDY CARDS WITH COMPLETE SOLUTIONS 100%
VERIFIED 2026 UPDATE!! ALREADY GRADED A+
Professional ethics refers to - (ANSWER)A set of principles and standards that guide the actions of
professionals that are often referenced in civil or criminal cases involving professional conduct
When working on a scaffold 20 feet high who must approve the scaffold for use? - (ANSWER)The
competent person
What mishaps require reporting to OSHA within 8 hours? - (ANSWER)The fatality of one or more
employees, because of a work-related incident
A guardrail system's MAJOR components include? - (ANSWER)Top rails, mid rails, toe boards
Incident investigations are conducted PRIMARILY to - (ANSWER)Determine causal conditions
Accident analysis is PRIMARILY used as a(n)? - (ANSWER)Indicator of problem areas
For injury accident analysis, information sources include all the following (First-aid Report, Insurance rate
table, First report of Injury form, Supervisor accident investigation) EXCEPT? - (ANSWER)Insurance rate
table
The MAJOR cause of serious industrial injuries is? - (ANSWER)Slips, trips, and falls
If a worker is injured while performing duties assigned by the employer, the injury is considered... -
(ANSWER)Work related
The two general areas of accident costs are - (ANSWER)Direct and indirect
Who should conduct MINOR incident and near miss investigations? - (ANSWER)Supervisor
Who should investigate a serious or fatal accident in an active mishap prevention program... -
(ANSWER)A senior management official
VERIFIED 2026 UPDATE!! ALREADY GRADED A+
STSC - (ANSWER)Safety Trained Supervisor in Construction
OHSMS - (ANSWER)Occupational Health and Safety Management Systems
Management Leadership - (ANSWER)Establish clear safety and health objectives for the OHSMS and
operationally define the actions needed to achieve those objectives
When in use, electrical power tools and cords must: - (ANSWER)Make use of ground fault circuit
interrupters or be a part of an assured grounding conductor program
If a supervisor is given authority by the general manager to stop operations site whenever he or she
observes an imminent danger situation. The following correctly identifies that authority... -
(ANSWER)Functional authority
A certified Safety Trained Supervisor is expected to... - (ANSWER)seek methods to improve your
knowledge and understanding of methods, techniques and practices for protection of workers. STS Code
of ethics
Arrange the following hazard control steps in the most appropriate sequence: (1) guard hazard, (2)
engineer out hazard, if possible, (3) educate personnel - (ANSWER)2-engineer out the hazard if possible,
1-guard hazard, 3-educate personnel
Which action is preferred when dealing with minor infractions of work safety rules? Oral reprimand,
Written reprimand, No response or consequence, suspension - (ANSWER)Oral reprimand
System safety analysis can be applied to... - (ANSWER)Any system that has interacting components
What should a supervisor do when a crew must walk across an area with open floor holes to go to their
work area? - (ANSWER)Have the floor holes covered and inform crew of load surface restrictions
,STSC EXAM STUDY CARDS WITH COMPLETE SOLUTIONS 100%
VERIFIED 2026 UPDATE!! ALREADY GRADED A+
The strongest motivator, according to contemporary motivation theory is... - (ANSWER)Recognition of
achievement for performance
Management has increased work hours and is punishing for more productivity. As STS, you are
concerned about some of the safety risks associated with this production schedule. You should... -
(ANSWER)Inform/communicate increased hazards due to increased production and verify that risk is
acceptable
The best evaluation of tasks descriptor involving steps, hazards and solutions is... - (ANSWER)Job Safety
Analysis (JSA)
What minimum PPE is required for a worker in a grinding operation... - (ANSWER)Eye and face protection
Minimally,_______authorized attendant(s) shall be on duty outside of the space during permit required
confined space operations and shall be responsible for securing immediate aid, keeping an accurate
count of entrants in case of emergency. - (ANSWER)One
A medical questionnaire required when safety workers place an employee in respiratory protection must
be evaluated by whom? - (ANSWER)A licensed health care professional aka (PLHCP) physician or other
licensed health care professional
In construction, each employee on a walking/working surface (horizontal and vertical surface) with an
unprotected side or edge which is _______feet or more above a lower level shall be protected from
falling by the use of guardrail systems, safety net systems or personal fall arrest systmes - (ANSWER)6
feet
A crew member deliberately violates a safety procedure. What should be done? - (ANSWER)Stop work,
write formal complaint and explain
Each employee on a scaffold more than_____feet above a lower level shall be provided with fall
protection to prevent from falling to a lower level - (ANSWER)10 feet
, STSC EXAM STUDY CARDS WITH COMPLETE SOLUTIONS 100%
VERIFIED 2026 UPDATE!! ALREADY GRADED A+
Professional ethics refers to - (ANSWER)A set of principles and standards that guide the actions of
professionals that are often referenced in civil or criminal cases involving professional conduct
When working on a scaffold 20 feet high who must approve the scaffold for use? - (ANSWER)The
competent person
What mishaps require reporting to OSHA within 8 hours? - (ANSWER)The fatality of one or more
employees, because of a work-related incident
A guardrail system's MAJOR components include? - (ANSWER)Top rails, mid rails, toe boards
Incident investigations are conducted PRIMARILY to - (ANSWER)Determine causal conditions
Accident analysis is PRIMARILY used as a(n)? - (ANSWER)Indicator of problem areas
For injury accident analysis, information sources include all the following (First-aid Report, Insurance rate
table, First report of Injury form, Supervisor accident investigation) EXCEPT? - (ANSWER)Insurance rate
table
The MAJOR cause of serious industrial injuries is? - (ANSWER)Slips, trips, and falls
If a worker is injured while performing duties assigned by the employer, the injury is considered... -
(ANSWER)Work related
The two general areas of accident costs are - (ANSWER)Direct and indirect
Who should conduct MINOR incident and near miss investigations? - (ANSWER)Supervisor
Who should investigate a serious or fatal accident in an active mishap prevention program... -
(ANSWER)A senior management official
