TCFP Inspectors Class reviewed
questions and simple answers.
,Which duty is not the responsibility of a level I Inspector?
A) Handle citizen complaints related to fire and life safety.
B) Perform plans reviews.
C) Interpret and apply adopted codes and standards.
D) Determine occupancy loads for single-use buildings. - CORRECT ANS:Perform plans reviews.
Most of the consensus standards that relate to fire and life safety are developed by the following
organizations except:
ASTM International,
National Fire Protection Assoc.,
American National Standards Institute,
Underwriters Laboratories - CORRECT ANS:American National Standards Institute
Regarding Commercial Kitchen Hood Systems, pipe penetrations of the exhaust hood require what?
a. Minimum 18 inch clearance to combustible materials
b. Printed manufacturer guidelines of spacing on the pipe itself
c. Gas shut off valve and electrical shunt accessibility
d. A liquid tight continuous external weld - CORRECT ANS:A liquid tight continuous external weld
A independent, non-profit organization that tests products for their intended use and certifies them as
safe describes:
A) ASTM International
B) American National Standards Institute
C) Underwriters Laboratories Inc.
D) Standards Council of Canada - CORRECT ANS:Underwriters Laboratories Inc.
, Which is not one of the three general types of drawings used to show structure, facility, or site
information?
A. Plot plan
B. Aerial view
C. Floor plan
D. Elevation view - CORRECT ANS:Aerial view
Structural lumber has a moisture content of ___________% or less.
25%
19%
15%
12% - CORRECT ANS:19%
Which of the following occupancies does not fall under state and local regulations?
A). Day care
B). Jail
C). Post office
D). Medical facility - CORRECT ANS:Post office
The typical life cycle of a model code edition is ___ years.
a. 5-7
b. 2-3
c. 7-10
d. 3-5 - CORRECT ANS:3-5
questions and simple answers.
,Which duty is not the responsibility of a level I Inspector?
A) Handle citizen complaints related to fire and life safety.
B) Perform plans reviews.
C) Interpret and apply adopted codes and standards.
D) Determine occupancy loads for single-use buildings. - CORRECT ANS:Perform plans reviews.
Most of the consensus standards that relate to fire and life safety are developed by the following
organizations except:
ASTM International,
National Fire Protection Assoc.,
American National Standards Institute,
Underwriters Laboratories - CORRECT ANS:American National Standards Institute
Regarding Commercial Kitchen Hood Systems, pipe penetrations of the exhaust hood require what?
a. Minimum 18 inch clearance to combustible materials
b. Printed manufacturer guidelines of spacing on the pipe itself
c. Gas shut off valve and electrical shunt accessibility
d. A liquid tight continuous external weld - CORRECT ANS:A liquid tight continuous external weld
A independent, non-profit organization that tests products for their intended use and certifies them as
safe describes:
A) ASTM International
B) American National Standards Institute
C) Underwriters Laboratories Inc.
D) Standards Council of Canada - CORRECT ANS:Underwriters Laboratories Inc.
, Which is not one of the three general types of drawings used to show structure, facility, or site
information?
A. Plot plan
B. Aerial view
C. Floor plan
D. Elevation view - CORRECT ANS:Aerial view
Structural lumber has a moisture content of ___________% or less.
25%
19%
15%
12% - CORRECT ANS:19%
Which of the following occupancies does not fall under state and local regulations?
A). Day care
B). Jail
C). Post office
D). Medical facility - CORRECT ANS:Post office
The typical life cycle of a model code edition is ___ years.
a. 5-7
b. 2-3
c. 7-10
d. 3-5 - CORRECT ANS:3-5
