FIRE SMOKE RESTORATION CORRECT EXAMS
QUESTIONS AND ANSWERS SET A+
✔✔Acid-based cleaning agents are aggressive cleaners which can be applied to tile,
grouting, and ___________ ____________ ___________. - ✔✔aluminum window
frames
✔✔While working within smaller enclosed room areas with aggressive cleaning agents,
restorers should adequately _____________ and wear _____________. - ✔✔ventilate,
PPE
✔✔The first step in cleaning non-asbestos acoustical ceiling tiles with light soot beings
by preconditioning with a _________. - ✔✔vaccum
✔✔When planning to clean and deodorize smoke damaged light fixtures, a safety step
before processing with cleaning is to _______ _______ electrical power. - ✔✔turn off
✔✔Areas that need to be cleaned when processing a _________ ________ system
include; interior and exterior of exhaust vents and replacing or cleaning filters. -
✔✔kitchen ventalations
✔✔Technicians who clean kitchen ventilation systems often overlook the vent hood
filters, ________,and ________ _________ ________. - ✔✔fans, exhaust duct system
✔✔When cleaning built-in appliances, technicians should check for smoke residue in
the ________ ________ and _______ ________. - ✔✔mounting cavities, sub surface
areas
✔✔A ________ ________ is a malfunction of an oil-fired heating system with attached
ducting. - ✔✔puff back
, ✔✔Complete HVAC system cleaning is recommended when __________ ________
reveals the need. - ✔✔an inspection
✔✔HVAC systems with heavy soot residues should dissembled, cleaned, and
deodorized following cleaning recommendations of the_____________
_______________. - ✔✔NADCA standards
✔✔What does NADCA stand for? - ✔✔National Air Duct Cleaning Association.
✔✔When considering the amount of time, effort and cost that should be used restoring
a content item, the values the restorer should consider are _______ __________, and
_________. - ✔✔monetary, appreciated, sentimental
✔✔Contents items that cannot be restored should not be disposed of until they have
been __________ and the customer has approved the disposal. - ✔✔documented
✔✔When inspecting the degree of damage sustained by wood furniture, restorers
should consider the furniture's relationship to the _______ line. - ✔✔heat
✔✔The finest grade of steel wool used on wood finishes by restorers to remove bakes-
on soot and the white discoloration caused by mositure is _______. - ✔✔0000
✔✔Wood furniture surfaces that respond to cleaning with a wood restoring gel, cream,
or compounds typically have a ________ ________. - ✔✔clear finished
✔✔Where white discoloration appears on finished wood surfaces, this is a reaction to
_______ or ________ absorption. - ✔✔heat, moisture
✔✔After cleaning wood furniture, the restorer should apply _______ _______ to restore
the shine on the surface. - ✔✔furniture polish
✔✔Stacking finished wood furniture immediately following cleaning with a wood
restoring cream may cause distortion on the ________ finish. - ✔✔wood
✔✔Blistered or permanently stained wood furniture traditionally is __________ or
_________. - ✔✔replaced, refinished
✔✔Remaining smoke stains on unfinished wood might be removed with _______
________, considered to be salvage procedure. - ✔✔light sanding
✔✔Apply petroleum-based deodorant to porous wood surface may cause some wood
tones to ________. - ✔✔darken
QUESTIONS AND ANSWERS SET A+
✔✔Acid-based cleaning agents are aggressive cleaners which can be applied to tile,
grouting, and ___________ ____________ ___________. - ✔✔aluminum window
frames
✔✔While working within smaller enclosed room areas with aggressive cleaning agents,
restorers should adequately _____________ and wear _____________. - ✔✔ventilate,
PPE
✔✔The first step in cleaning non-asbestos acoustical ceiling tiles with light soot beings
by preconditioning with a _________. - ✔✔vaccum
✔✔When planning to clean and deodorize smoke damaged light fixtures, a safety step
before processing with cleaning is to _______ _______ electrical power. - ✔✔turn off
✔✔Areas that need to be cleaned when processing a _________ ________ system
include; interior and exterior of exhaust vents and replacing or cleaning filters. -
✔✔kitchen ventalations
✔✔Technicians who clean kitchen ventilation systems often overlook the vent hood
filters, ________,and ________ _________ ________. - ✔✔fans, exhaust duct system
✔✔When cleaning built-in appliances, technicians should check for smoke residue in
the ________ ________ and _______ ________. - ✔✔mounting cavities, sub surface
areas
✔✔A ________ ________ is a malfunction of an oil-fired heating system with attached
ducting. - ✔✔puff back
, ✔✔Complete HVAC system cleaning is recommended when __________ ________
reveals the need. - ✔✔an inspection
✔✔HVAC systems with heavy soot residues should dissembled, cleaned, and
deodorized following cleaning recommendations of the_____________
_______________. - ✔✔NADCA standards
✔✔What does NADCA stand for? - ✔✔National Air Duct Cleaning Association.
✔✔When considering the amount of time, effort and cost that should be used restoring
a content item, the values the restorer should consider are _______ __________, and
_________. - ✔✔monetary, appreciated, sentimental
✔✔Contents items that cannot be restored should not be disposed of until they have
been __________ and the customer has approved the disposal. - ✔✔documented
✔✔When inspecting the degree of damage sustained by wood furniture, restorers
should consider the furniture's relationship to the _______ line. - ✔✔heat
✔✔The finest grade of steel wool used on wood finishes by restorers to remove bakes-
on soot and the white discoloration caused by mositure is _______. - ✔✔0000
✔✔Wood furniture surfaces that respond to cleaning with a wood restoring gel, cream,
or compounds typically have a ________ ________. - ✔✔clear finished
✔✔Where white discoloration appears on finished wood surfaces, this is a reaction to
_______ or ________ absorption. - ✔✔heat, moisture
✔✔After cleaning wood furniture, the restorer should apply _______ _______ to restore
the shine on the surface. - ✔✔furniture polish
✔✔Stacking finished wood furniture immediately following cleaning with a wood
restoring cream may cause distortion on the ________ finish. - ✔✔wood
✔✔Blistered or permanently stained wood furniture traditionally is __________ or
_________. - ✔✔replaced, refinished
✔✔Remaining smoke stains on unfinished wood might be removed with _______
________, considered to be salvage procedure. - ✔✔light sanding
✔✔Apply petroleum-based deodorant to porous wood surface may cause some wood
tones to ________. - ✔✔darken
