Page 1 of 39
MINNESOTA LIMITED ENERGY INSTALLER EXAM
2026/2027 COMPLETE (100) CURRENT TESTING
QUESTIONS AND CORRECT ANSWERS WITH DETAILED
RATIONALES.
ENERGY
Prepare for the Minnesota Limited Energy Installer Exam with this focused practice
resource designed to support your licensing preparation. It features exam-style
practice questions covering the National Electrical Code (NEC) Article 725, 760, 770,
and 800, Minnesota Electrical Act provisions, Class 2 and Class 3 power-limited
circuits, fire alarm signaling, telecommunications cabling, grounding and bonding,
circuit separation, and Minnesota Department of Labor and Industry (DLI) licensing
requirements. An ideal study aid for limited energy technicians, low-voltage installers,
and system integrators looking to demonstrate technical competence and pass their
Minnesota state licensing exam.
MULTIPLE CHOICE.
SECTION 1: DEFINITIONS AND BASIC CONCEPTS (Questions 1-15)
1. What is the maximum nominal voltage allowed for a Class L limited-
energy installation in Minnesota?
A) 50 V
B) 75 V
C) 98 V
D) 120 V
Answer: C
Rationale: The Minnesota Class L license limits work to circuits that do
not exceed 98 volts, per the state's limited-energy definition.
2. Which Minnesota statute defines the scope of work for a Power Limited
Technician?
, Page 2 of 39
A) Minnesota Statutes Chapter 326
B) Minnesota Statutes Chapter 326B
C) Minnesota Statutes Chapter 324
D) Minnesota Statutes Chapter 328
Answer: B
Rationale: Minnesota Statutes Chapter 326B governs construction codes
and licensing, including the definitions and scope for Power Limited
Technicians.
3. Which of the following best defines a power-limited system in electrical
installations?
A) A system that operates at voltages above 600 volts
B) A system that uses low voltage to ensure safety and control
C) A system that exclusively powers high-energy appliances
D) A system with no restrictions on voltage or current
Answer: B
Rationale: Power-limited systems operate at low voltages, typically under
600 volts, to reduce risk and enhance safety in control, signaling, and
communication applications.
4. Which license does Minnesota require for low voltage work?
A) Master Electrician only
B) Power Limited Technician or Technology Systems Contractor license
C) General Electrician only
D) No license required
Answer: B
Rationale: Minnesota requires either a Power Limited Technician or
, Page 3 of 39
Technology Systems Contractor license for low voltage work. These
licenses cover fire alarm, security, data, and telecommunications
installations.
5. According to Minnesota Rules, which chapter specifies licensing,
examination, and continuing education requirements for Power Limited
Technicians?
A) Chapter 1300
B) Chapter 3800
C) Chapter 5220
D) Chapter 4761
Answer: B
Rationale: Minnesota Rules Chapter 3800 specifies licensing,
examination, and continuing education requirements for Power Limited
Technicians.
6. What is the difference between a Power Limited Technician and a
Technology Systems Contractor?
A) No difference
B) Technology Systems Contractor can own a business while Technician
works under supervision
C) Technician is the higher-level license
D) Contractor is only for residential work
Answer: B
Rationale: A Technology Systems Contractor can own and operate a low
voltage business in Minnesota, while a Power Limited Technician works
under the supervision of a licensed contractor.
, Page 4 of 39
7. Which Minnesota state agency oversees low voltage electrical
licensing?
A) Minnesota Department of Labor
B) Minnesota Electricity Board
C) Minnesota Board of Electricity (Dept of Labor)
D) Minnesota Department of Commerce
Answer: C
Rationale: The Minnesota Electricity Board (part of the Department of
Labor and Industry) oversees electrical licensing, including Power Limited
Technician and Technology Systems Contractor licenses for low voltage
work.
8. How many questions are on the Power Limited Technician exam?
A) 50 questions
B) 80 questions
C) 100 questions
D) 150 questions
Answer: B
Rationale: The Power Limited Technician Exam consists of 80 questions.
You will have 5.5 hours to complete the open-book exam, and you must
answer at least 70% of the questions (56) correctly to pass.
9. Which of the following is NOT typically covered by a Power Limited
Technician license?
A) Fire alarm systems
B) Security systems
C) High-voltage power distribution (480 V)
MINNESOTA LIMITED ENERGY INSTALLER EXAM
2026/2027 COMPLETE (100) CURRENT TESTING
QUESTIONS AND CORRECT ANSWERS WITH DETAILED
RATIONALES.
ENERGY
Prepare for the Minnesota Limited Energy Installer Exam with this focused practice
resource designed to support your licensing preparation. It features exam-style
practice questions covering the National Electrical Code (NEC) Article 725, 760, 770,
and 800, Minnesota Electrical Act provisions, Class 2 and Class 3 power-limited
circuits, fire alarm signaling, telecommunications cabling, grounding and bonding,
circuit separation, and Minnesota Department of Labor and Industry (DLI) licensing
requirements. An ideal study aid for limited energy technicians, low-voltage installers,
and system integrators looking to demonstrate technical competence and pass their
Minnesota state licensing exam.
MULTIPLE CHOICE.
SECTION 1: DEFINITIONS AND BASIC CONCEPTS (Questions 1-15)
1. What is the maximum nominal voltage allowed for a Class L limited-
energy installation in Minnesota?
A) 50 V
B) 75 V
C) 98 V
D) 120 V
Answer: C
Rationale: The Minnesota Class L license limits work to circuits that do
not exceed 98 volts, per the state's limited-energy definition.
2. Which Minnesota statute defines the scope of work for a Power Limited
Technician?
, Page 2 of 39
A) Minnesota Statutes Chapter 326
B) Minnesota Statutes Chapter 326B
C) Minnesota Statutes Chapter 324
D) Minnesota Statutes Chapter 328
Answer: B
Rationale: Minnesota Statutes Chapter 326B governs construction codes
and licensing, including the definitions and scope for Power Limited
Technicians.
3. Which of the following best defines a power-limited system in electrical
installations?
A) A system that operates at voltages above 600 volts
B) A system that uses low voltage to ensure safety and control
C) A system that exclusively powers high-energy appliances
D) A system with no restrictions on voltage or current
Answer: B
Rationale: Power-limited systems operate at low voltages, typically under
600 volts, to reduce risk and enhance safety in control, signaling, and
communication applications.
4. Which license does Minnesota require for low voltage work?
A) Master Electrician only
B) Power Limited Technician or Technology Systems Contractor license
C) General Electrician only
D) No license required
Answer: B
Rationale: Minnesota requires either a Power Limited Technician or
, Page 3 of 39
Technology Systems Contractor license for low voltage work. These
licenses cover fire alarm, security, data, and telecommunications
installations.
5. According to Minnesota Rules, which chapter specifies licensing,
examination, and continuing education requirements for Power Limited
Technicians?
A) Chapter 1300
B) Chapter 3800
C) Chapter 5220
D) Chapter 4761
Answer: B
Rationale: Minnesota Rules Chapter 3800 specifies licensing,
examination, and continuing education requirements for Power Limited
Technicians.
6. What is the difference between a Power Limited Technician and a
Technology Systems Contractor?
A) No difference
B) Technology Systems Contractor can own a business while Technician
works under supervision
C) Technician is the higher-level license
D) Contractor is only for residential work
Answer: B
Rationale: A Technology Systems Contractor can own and operate a low
voltage business in Minnesota, while a Power Limited Technician works
under the supervision of a licensed contractor.
, Page 4 of 39
7. Which Minnesota state agency oversees low voltage electrical
licensing?
A) Minnesota Department of Labor
B) Minnesota Electricity Board
C) Minnesota Board of Electricity (Dept of Labor)
D) Minnesota Department of Commerce
Answer: C
Rationale: The Minnesota Electricity Board (part of the Department of
Labor and Industry) oversees electrical licensing, including Power Limited
Technician and Technology Systems Contractor licenses for low voltage
work.
8. How many questions are on the Power Limited Technician exam?
A) 50 questions
B) 80 questions
C) 100 questions
D) 150 questions
Answer: B
Rationale: The Power Limited Technician Exam consists of 80 questions.
You will have 5.5 hours to complete the open-book exam, and you must
answer at least 70% of the questions (56) correctly to pass.
9. Which of the following is NOT typically covered by a Power Limited
Technician license?
A) Fire alarm systems
B) Security systems
C) High-voltage power distribution (480 V)
