8/28/26, 2:04 PM SOS MECHANIC CERTIFICATION EXAM ACTUAL EXAM 2026 – BRAKES | ALL QUESTIONS AND CORRECT ANSWERS | VER…
SOS MECHANIC CERTIFICATION EXAM ACTUAL
EXAM 2026 – BRAKES | ALL QUESTIONS AND
CORRECT ANSWERS | VERIFIED ANSWERS | BRAND
NEW VERSION
Play your way to mastery with fun games
Match Blocks Charms NEW
Terms in this set (83)
Most 1995 & newer vehicles use which Sealed non-serviceable
of the following types of wheels
bearings on non-drive wheel?
to test a vacuum power brake booster drop slightly and remain firm
in the vehicle, you should pump the
brake pedal at least 4 times, hold the
brake pedal depressed, and start the
engine. the brake pedal should:
https://quizlet.com/1202603400/sos-mechanic-certification-exam-actual-exam-2026-brakes-all-questions-and-correct-answers-verified-answers-brand… 1/11
, 8/28/26, 2:04 PM SOS MECHANIC CERTIFICATION EXAM ACTUAL EXAM 2026 – BRAKES | ALL QUESTIONS AND CORRECT ANSWERS | VER…
You are installing a set of brake shoe Smaller and goes towards the front of the car.
linings that are not the same length.
Traditionally, the primary shoe lining is:
A cracked or torn vacuum diaphragm a hard pedal feel requiring very high pedal effort to
in a brake power booster would most stop
likely cause:
A mechanic finds gear lube inside both A plugged axle
rear brake drums on a rear wheel drive
vehicle. What is the most likely cause
of this problem?
Which of the following incorrect master cylinder push rod adjusted too long
service procedures will cause brake
lock-up?
Which of the following describes the Pump the brake pedal at least 25 times (or more,
proper way to depressurized an ABS depending on the manufacturer's recommendation)
system? with the ignition off.
The rear brakes are dragging after technician use the parking brake to adjust shoes and
having new linings installed and the the cable is stuck
drums machined. the most likely cause
is the:
https://quizlet.com/1202603400/sos-mechanic-certification-exam-actual-exam-2026-brakes-all-questions-and-correct-answers-verified-answers-brand… 2/11
SOS MECHANIC CERTIFICATION EXAM ACTUAL
EXAM 2026 – BRAKES | ALL QUESTIONS AND
CORRECT ANSWERS | VERIFIED ANSWERS | BRAND
NEW VERSION
Play your way to mastery with fun games
Match Blocks Charms NEW
Terms in this set (83)
Most 1995 & newer vehicles use which Sealed non-serviceable
of the following types of wheels
bearings on non-drive wheel?
to test a vacuum power brake booster drop slightly and remain firm
in the vehicle, you should pump the
brake pedal at least 4 times, hold the
brake pedal depressed, and start the
engine. the brake pedal should:
https://quizlet.com/1202603400/sos-mechanic-certification-exam-actual-exam-2026-brakes-all-questions-and-correct-answers-verified-answers-brand… 1/11
, 8/28/26, 2:04 PM SOS MECHANIC CERTIFICATION EXAM ACTUAL EXAM 2026 – BRAKES | ALL QUESTIONS AND CORRECT ANSWERS | VER…
You are installing a set of brake shoe Smaller and goes towards the front of the car.
linings that are not the same length.
Traditionally, the primary shoe lining is:
A cracked or torn vacuum diaphragm a hard pedal feel requiring very high pedal effort to
in a brake power booster would most stop
likely cause:
A mechanic finds gear lube inside both A plugged axle
rear brake drums on a rear wheel drive
vehicle. What is the most likely cause
of this problem?
Which of the following incorrect master cylinder push rod adjusted too long
service procedures will cause brake
lock-up?
Which of the following describes the Pump the brake pedal at least 25 times (or more,
proper way to depressurized an ABS depending on the manufacturer's recommendation)
system? with the ignition off.
The rear brakes are dragging after technician use the parking brake to adjust shoes and
having new linings installed and the the cable is stuck
drums machined. the most likely cause
is the:
https://quizlet.com/1202603400/sos-mechanic-certification-exam-actual-exam-2026-brakes-all-questions-and-correct-answers-verified-answers-brand… 2/11
