CPSI EXAM Questions and Answers
Verified Solutions Latest Update
Question:
The front and rear use zone where swing motion occurs cannot overlap for a distance
of ______ to both the front and the rear.
Answer:
2x x = the vertical distance from the protective surface to the pivot point of the swing.
Question:
What is the handhold length of a seated rocking equipment ?
Answer:
min. length 3"
Question:
Wheelchair accessible platform: The openings in platform, and between edge and
railing may not exceed ______" horizontal opening
Answer:
1/2" (0.5")
Question:
What is the minimum side use zone for a rotating swing support structure?
Answer:
72"
Question:
Comprehensive program of playground safety includes....
Answer:
audits -inspections -maintenance
,Question:
What does the middle projection gauge measure?
Answer:
projection entering brain thru eye socket
Question:
What does the large projection gauge measure?
Answer:
soft tissue damage such as bruise or ruptured organs in abdominal area
Question:
What is the max height of a balance beam?
Answer:
12" max hgt for 2-5 yo 16" max hgt for 5-12 yo
Question:
What is min overlap use zone for To-Fro Swing support structure?
Answer:
72"
Question:
What is the dowel size of the crush/shear test probe on Merry-Go-Rounds?
Answer:
0.30" (5/16")
Question:
Entanglement hazards: If connecting devices that have in-fill such as plastic or cable
that completely fills the interior space of both loops preventing entry items of clothing,
is this exempt?
Answer:
YES
,Question:
What is the minimum footrest length of a seated spring rocking equipment?
Answer:
3 1/2"
Question:
What is the dowel size of crush / sheer hazards with movement?
Answer:
0.62" (5/8")
Question:
Partially Bound Openings: The template is considered fully inserted if it goes below the
top of the opening more than ____"
Answer:
3/4" (0.75")
Question:
What is the minimum diameter of hand gripping components?
Answer:
0.95"
Question:
What is the dowel diameter for roller slides?
Answer:
0.19" (3/16")
Question:
What is the minimum diameter of handrails?
Answer:
0.95"
, Question:
What is the diameter of a medium dowel?
Answer:
.30" (5/16")
Question:
What is the distance from the platform to the sliding pole?
Answer:
18"-20"
Question:
Stepping forms must be stationary when they are ________________
Answer:
>30"
Question:
What is the distance between stepping platforms?
Answer:
PS 12" max SA 18" max
Question:
What are track ride platform dimensions (when used)?
Answer:
Min depth 36" Min width 32" Max platform hgt 36" for SA users
Question:
Upper body equipment can be used by children ___ and up
Answer:
4
Verified Solutions Latest Update
Question:
The front and rear use zone where swing motion occurs cannot overlap for a distance
of ______ to both the front and the rear.
Answer:
2x x = the vertical distance from the protective surface to the pivot point of the swing.
Question:
What is the handhold length of a seated rocking equipment ?
Answer:
min. length 3"
Question:
Wheelchair accessible platform: The openings in platform, and between edge and
railing may not exceed ______" horizontal opening
Answer:
1/2" (0.5")
Question:
What is the minimum side use zone for a rotating swing support structure?
Answer:
72"
Question:
Comprehensive program of playground safety includes....
Answer:
audits -inspections -maintenance
,Question:
What does the middle projection gauge measure?
Answer:
projection entering brain thru eye socket
Question:
What does the large projection gauge measure?
Answer:
soft tissue damage such as bruise or ruptured organs in abdominal area
Question:
What is the max height of a balance beam?
Answer:
12" max hgt for 2-5 yo 16" max hgt for 5-12 yo
Question:
What is min overlap use zone for To-Fro Swing support structure?
Answer:
72"
Question:
What is the dowel size of the crush/shear test probe on Merry-Go-Rounds?
Answer:
0.30" (5/16")
Question:
Entanglement hazards: If connecting devices that have in-fill such as plastic or cable
that completely fills the interior space of both loops preventing entry items of clothing,
is this exempt?
Answer:
YES
,Question:
What is the minimum footrest length of a seated spring rocking equipment?
Answer:
3 1/2"
Question:
What is the dowel size of crush / sheer hazards with movement?
Answer:
0.62" (5/8")
Question:
Partially Bound Openings: The template is considered fully inserted if it goes below the
top of the opening more than ____"
Answer:
3/4" (0.75")
Question:
What is the minimum diameter of hand gripping components?
Answer:
0.95"
Question:
What is the dowel diameter for roller slides?
Answer:
0.19" (3/16")
Question:
What is the minimum diameter of handrails?
Answer:
0.95"
, Question:
What is the diameter of a medium dowel?
Answer:
.30" (5/16")
Question:
What is the distance from the platform to the sliding pole?
Answer:
18"-20"
Question:
Stepping forms must be stationary when they are ________________
Answer:
>30"
Question:
What is the distance between stepping platforms?
Answer:
PS 12" max SA 18" max
Question:
What are track ride platform dimensions (when used)?
Answer:
Min depth 36" Min width 32" Max platform hgt 36" for SA users
Question:
Upper body equipment can be used by children ___ and up
Answer:
4
