Firefighter 1 & 2 State Test
What is the mission of the fire service? To save lives and protect property
What NFPA standard establishes basic training criteria 1001
for Firefighter I and Firefighter II
A ____ is a collection of rules enacted by law in a Code
particular jurisdiction.
Which of the following BEST describes the action first Dispatching of emergency services responders
taken after an alert to the station?
What task may a telecommunications center be assigned Periodic time transmissions
during a progress report?
Which of the following must be considered when Type of building construction and safest location for personel
deciding the size of a collapse zone?
Which of the following best describes when SARS are Confined space rescues and technical rescue incidents
used?
Which of the following SCBA components warns when End of service time indicators
the system is reaching 20-25 percent of cylinder
capacity?
When donning SCBA, all straps on the harness Fully extended
assembly and facepiece should be
Which types of SCBA are tested every five years? Steel and aluminum
Which of the following types of rope is the only rope Life safety rope
required to have a rope log?
Which part of the rope is used to tie a knot or hitch? Working
Which type of knot can be used to secure a victim's Handcuff
hands or feet to drag the victim to safety?
Once a search is complete, a firefighter should Report promptly to the supervisor
What are the two objectives for a structural search? Search for life; assess fire conditions
In the acronym LUNAR, the A stands for Assignment
, Firefighter 1 & 2 State Test
Which of the following best describes the result of Will overheat and damage the generator.
running a generator for a long period of time without a
load?
Which rescue tool power source is typically powered by Hydraulic
pumps?
What stabilizing tool uses a system of at least three Buttress tension system
wedged posts between the ground and a vehicle resting
on its side or top?
Hybrid vehicles that use color coded wiring use ____ to Orange
mark high voltage wiring.
When using a strut and buttress tension system, In excess of the weight being secured
firefighters must ensure all parts have a safety margin
that is:
What type of extrication method is used to stabilize a Buttress tension system
vehicle that is upside down or lying on its side?
What initial action is the next priority after stabilizing the Stabilize the victim
scene?
What type of structural collapse occurs when the floor A-frame
and/or roof assemblies on both sides of a load-bearing
wall collapse, allowing a good chance of victim survival?
In the OATH method of signaling on a search line, two Advance
tugs represents
Which of the following is an example of a push/pull tool? Pike pole
Cutting edges on axes should be inspected for: Chips, cracks, or spurs
When caring for an unprotected metal surface, use a Remove burrs from a cutting edge
metal file to:
NFPA 1931 requires that single, roof combination and 750 lbs
extension ladders must support a maximum load of
Ground ladders should be service tested before being Once each year
placed in service, ____ while in service, and after use
that exposes the ladder to high heat or rough treatment.
Which of the following describes the best placement of a Ladder tip slightly below sill, or wedged under sill lip
ladder to be used for entry or rescue from a window?
Which of the following is a reason that modern Energy efficient designs
construction may tend to contain fires for longer periods
of time?
What is the mission of the fire service? To save lives and protect property
What NFPA standard establishes basic training criteria 1001
for Firefighter I and Firefighter II
A ____ is a collection of rules enacted by law in a Code
particular jurisdiction.
Which of the following BEST describes the action first Dispatching of emergency services responders
taken after an alert to the station?
What task may a telecommunications center be assigned Periodic time transmissions
during a progress report?
Which of the following must be considered when Type of building construction and safest location for personel
deciding the size of a collapse zone?
Which of the following best describes when SARS are Confined space rescues and technical rescue incidents
used?
Which of the following SCBA components warns when End of service time indicators
the system is reaching 20-25 percent of cylinder
capacity?
When donning SCBA, all straps on the harness Fully extended
assembly and facepiece should be
Which types of SCBA are tested every five years? Steel and aluminum
Which of the following types of rope is the only rope Life safety rope
required to have a rope log?
Which part of the rope is used to tie a knot or hitch? Working
Which type of knot can be used to secure a victim's Handcuff
hands or feet to drag the victim to safety?
Once a search is complete, a firefighter should Report promptly to the supervisor
What are the two objectives for a structural search? Search for life; assess fire conditions
In the acronym LUNAR, the A stands for Assignment
, Firefighter 1 & 2 State Test
Which of the following best describes the result of Will overheat and damage the generator.
running a generator for a long period of time without a
load?
Which rescue tool power source is typically powered by Hydraulic
pumps?
What stabilizing tool uses a system of at least three Buttress tension system
wedged posts between the ground and a vehicle resting
on its side or top?
Hybrid vehicles that use color coded wiring use ____ to Orange
mark high voltage wiring.
When using a strut and buttress tension system, In excess of the weight being secured
firefighters must ensure all parts have a safety margin
that is:
What type of extrication method is used to stabilize a Buttress tension system
vehicle that is upside down or lying on its side?
What initial action is the next priority after stabilizing the Stabilize the victim
scene?
What type of structural collapse occurs when the floor A-frame
and/or roof assemblies on both sides of a load-bearing
wall collapse, allowing a good chance of victim survival?
In the OATH method of signaling on a search line, two Advance
tugs represents
Which of the following is an example of a push/pull tool? Pike pole
Cutting edges on axes should be inspected for: Chips, cracks, or spurs
When caring for an unprotected metal surface, use a Remove burrs from a cutting edge
metal file to:
NFPA 1931 requires that single, roof combination and 750 lbs
extension ladders must support a maximum load of
Ground ladders should be service tested before being Once each year
placed in service, ____ while in service, and after use
that exposes the ladder to high heat or rough treatment.
Which of the following describes the best placement of a Ladder tip slightly below sill, or wedged under sill lip
ladder to be used for entry or rescue from a window?
Which of the following is a reason that modern Energy efficient designs
construction may tend to contain fires for longer periods
of time?
