Certification Practice Exam (2)
2026/2027 Exam All Answers
and Illustrations Given
You are a cybersecurity consultant and have been asked to work with
the ACME, Inc. company to ensure their network is protected from
hackers. As part of the tests, you need to disable logging on a Windows
system.
In this lab, your task is to use Windows PowerShell (as Admin) to:
View the current audit policies on the system.
Disable all audit policies.
,Confirm that all the audits were disabled. - ANSWER ✔✔Complete
this lab as follows:
Right-click Start and select Windows PowerShell (Admin).
Maximize the window for easier viewing.
At the command prompt, type auditpol /get /category:* and press Enter
to view the current audit policies.Notice the different settings used for
each system.
Type auditpol /clear /y and press Enter to disable all audit policies.
Type auditpol /get /category:* and press Enter to confirm that the audits
were disabled.Notice that all of the polices are now set to No Auditing.
As an IT administrator, you need to know how security breaches are
caused. You know that SMAC is used for MAC spoofing, so you are
going to spoof your MAC address.
In this lab, your task is to complete the following:
On Office2 use ipconfig /all and find the IP address and MAC address.
Spoof the MAC address on ITAdmin to that of Office2 using SMAC.
Refresh your MAC and IP addresses to match the target machine. -
ANSWER ✔✔Complete this lab as follows:
, Find the IP address and MAC address as follows:Right-click Start and
select Windows PowerShell (Admin).At the command prompt, type
ipconfig /all and press Enter.Find the MAC address and the IP address.
Spoof the MAC address as follows:From the top navigation tabs, select
Floor 1 Overview.Under IT Administration, select ITAdmin.In the search
bar, type SMAC.Under Best match, right-click SMAC and select Run as
administrator.In the New Spoofed Mac Address field, type
00:00:55:55:44:15 for the MAC address from Office2.Select Update
MAC.Select OK to restart the adapter.
Refresh your MAC and IP addresses as follows:Right-click Start and
select Windows PowerShell (Admin).At the command prompt, type
ipconfig /all to confirm the MAC address has been updated.Type ipconfig
/renew to update the IP address.
You are the cypersecurity specialist for your company. You are
conducting a penetration test to see if anyone is using FTP against
company policy.
In this lab, your task is to capture FTP packets as follows:
Use Wireshark to capture packets for five seconds.
Filter for FTP packets.
Answer the questions. - ANSWER ✔✔Complete this lab as follows:
COPYRIGHT©PROFFKERRYMARTIN 2026/2027. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED