IRRIGATION ASSOCIATION
LANDSCAPE IRRIGATION AUDITOR
EXAM 2026/2027 WITH QUESTIONS
AND EXPERT-VERIFIED CORRECT
ANSWERS | ALREADY GRADED A+ |
GUARANTEED PASS
during the system inspection the auditor will make note of
the source of water, backflow device, water meter, controller settings, and if the
water is potable, irrigation, or from a pond
The Steps of Irrigation Performance Auditing
Step 1 : System and site inspection Step 2 System tune - up Step 3 : System testing
Step 4 Sprinkler performance calculations Step 5 Report of findings
, the irrigation auditor should note if the water meter is connected to
shared with the building.
how many gallons are there per 100 cubic feet
748 gallons per 100 cubic feet or 7.48 gallons per cubic foot
the last two digits are often fixed on a water meter because you must read the
sweeping hand on the dial
once the valves are located the blank blank and blank should be noted
brand and model number along with the size. note any damage or leaks
when determining the gallons per minute on a zone how long should you run it for?
you should run it for 3 to 5 minutes to get the average
chapter one page 9 there are two reasons for checking the system pressure
LANDSCAPE IRRIGATION AUDITOR
EXAM 2026/2027 WITH QUESTIONS
AND EXPERT-VERIFIED CORRECT
ANSWERS | ALREADY GRADED A+ |
GUARANTEED PASS
during the system inspection the auditor will make note of
the source of water, backflow device, water meter, controller settings, and if the
water is potable, irrigation, or from a pond
The Steps of Irrigation Performance Auditing
Step 1 : System and site inspection Step 2 System tune - up Step 3 : System testing
Step 4 Sprinkler performance calculations Step 5 Report of findings
, the irrigation auditor should note if the water meter is connected to
shared with the building.
how many gallons are there per 100 cubic feet
748 gallons per 100 cubic feet or 7.48 gallons per cubic foot
the last two digits are often fixed on a water meter because you must read the
sweeping hand on the dial
once the valves are located the blank blank and blank should be noted
brand and model number along with the size. note any damage or leaks
when determining the gallons per minute on a zone how long should you run it for?
you should run it for 3 to 5 minutes to get the average
chapter one page 9 there are two reasons for checking the system pressure
