AIM Block 1 FInAl ExAM 2026 WITH coRREcT AcTUAl QUESTIonS
AnD coRREcTlY WEll DEFInED AnSWERS lATEST AlREADY GRADED
A+ || jUST RElEASED .
The aspect ratio of an aircraft wing is defined as the ratio of the: - coRREcT AnSWER-
Wingspan to the mean chord.
Which of the following statements concerning density is correct? - coRREcT AnSWER-If
the air pressure is decreased, the density of the air decreases.
The amount of water vapor present in the air is called: - coRREcT AnSWER-Humidity
An aircraft's movement around its vertical axis is controlled by the: - coRREcT AnSWER-
Rudder
An aircraft's movement about its lateral axis is controlled by: - coRREcT AnSWER-
Elevators
Which control apparatus is considered to be a secondary flight control? - coRREcT
AnSWER-Trim Tabs
The most common inspection process or procedure which accounts for approximately
80% of all NDI methods - coRREcT AnSWER-Visual Inspection
The standard sea level pressure is: - coRREcT AnSWER-29.92" Hg. at 59 degrees F
Of the three temperature scales, which one is used the least? - coRREcT AnSWER-
Rankine
Which of the following statements is true? - coRREcT AnSWER-Water vapor weighs 5/8's
as much as dry air
, When air holds water vapor, it: - coRREcT AnSWER-Is lighter than dry air
This inspection method is used to detect surface cracks, pits, subsurface cracks,
corrosion on inner surfaces, and to determine alloy and heat-treat condition: - coRREcT
AnSWER-Eddy Current
This inspection method is a method for detecting cracks, laps, seams, voids, pits,
subsurface holes, and other surface, or slightly subsurface, discontinuities in ferro-
magnetic materials: - coRREcT AnSWER-Magnetic Particle
A good inspection process to use on nonporous metal and nonmetal components to find
material discontinuities that are open to the surface which may not be evident to normal
visual inspection is: - coRREcT AnSWER-Dye Penetrant
An NDI inspection technique that uses sound energy moving through the test specimen
to detect flaws is commonly known as: - coRREcT AnSWER-Ultrasonic Inspection
Tap testing is used to look for which of the following problems: - coRREcT AnSWER-
Delamination of composite materials
When the weight force is in equilibrium with the lift force, the aircraft: - coRREcT
AnSWER-remains in level flight
ADs are published to notify aircraft owners and other interested persons of: - coRREcT
AnSWER-Unsafe conditions which may affect a particular aircraft.
Ailerons control___,Elevators control___,Rudders control____: - coRREcT AnSWER-Roll;
Pitch; Yaw
The purpose of the vertical stabilizer is to provide: - coRREcT AnSWER-Directional
Stability
AnD coRREcTlY WEll DEFInED AnSWERS lATEST AlREADY GRADED
A+ || jUST RElEASED .
The aspect ratio of an aircraft wing is defined as the ratio of the: - coRREcT AnSWER-
Wingspan to the mean chord.
Which of the following statements concerning density is correct? - coRREcT AnSWER-If
the air pressure is decreased, the density of the air decreases.
The amount of water vapor present in the air is called: - coRREcT AnSWER-Humidity
An aircraft's movement around its vertical axis is controlled by the: - coRREcT AnSWER-
Rudder
An aircraft's movement about its lateral axis is controlled by: - coRREcT AnSWER-
Elevators
Which control apparatus is considered to be a secondary flight control? - coRREcT
AnSWER-Trim Tabs
The most common inspection process or procedure which accounts for approximately
80% of all NDI methods - coRREcT AnSWER-Visual Inspection
The standard sea level pressure is: - coRREcT AnSWER-29.92" Hg. at 59 degrees F
Of the three temperature scales, which one is used the least? - coRREcT AnSWER-
Rankine
Which of the following statements is true? - coRREcT AnSWER-Water vapor weighs 5/8's
as much as dry air
, When air holds water vapor, it: - coRREcT AnSWER-Is lighter than dry air
This inspection method is used to detect surface cracks, pits, subsurface cracks,
corrosion on inner surfaces, and to determine alloy and heat-treat condition: - coRREcT
AnSWER-Eddy Current
This inspection method is a method for detecting cracks, laps, seams, voids, pits,
subsurface holes, and other surface, or slightly subsurface, discontinuities in ferro-
magnetic materials: - coRREcT AnSWER-Magnetic Particle
A good inspection process to use on nonporous metal and nonmetal components to find
material discontinuities that are open to the surface which may not be evident to normal
visual inspection is: - coRREcT AnSWER-Dye Penetrant
An NDI inspection technique that uses sound energy moving through the test specimen
to detect flaws is commonly known as: - coRREcT AnSWER-Ultrasonic Inspection
Tap testing is used to look for which of the following problems: - coRREcT AnSWER-
Delamination of composite materials
When the weight force is in equilibrium with the lift force, the aircraft: - coRREcT
AnSWER-remains in level flight
ADs are published to notify aircraft owners and other interested persons of: - coRREcT
AnSWER-Unsafe conditions which may affect a particular aircraft.
Ailerons control___,Elevators control___,Rudders control____: - coRREcT AnSWER-Roll;
Pitch; Yaw
The purpose of the vertical stabilizer is to provide: - coRREcT AnSWER-Directional
Stability
