COG170 : Cogito Fundamentals Exam COMPLETE
Questions and Answers with 100% Correct Answers
Question 1.
1. Assuming a user has the appropriate user role to access a dashboard, what oth- er
dashboard settings control whether the dashboard is available for viewing?
Correct Answer: The Ready for use and Enabled for user se- lection check boxes.
Question 2.
2. Which of the following would you enter in the Parameters field of an activity link to open
a Hyperspace activity? a. The activity descriptor and any required parameters for the
activity. b. The menu descriptor of the activity. c. The user-facing name of the activity. d.
the parent menu of the activity record.
Correct Answer: a. The activity descriptor and any required parameters for the
activity.
Question 3.
3. You have built a component record. Which of the following could explain why the
component does not appear on a spe- cific dashboard? a. The component is not set as
ready for use. b. The component is not listed on the Con- tent form of the dashboard. c.
The component and the dashboard do not share any report groups. d. The component
has not been marked as enabled for user selection.
Correct Answer: Both: a. The component is not set as ready for use. b. The
component is not listed on the Con- tent form of the dashboard.
Question 4.
True or False: Components require a defined Display ti- tle on the Display form.
Correct Answer: True: this is a required field.
Question 5.
Study Checklist: Chapter 2
Correct Answer:
Question 6.
Define: Dashboard
Correct Answer: Dashboards centralize content from around Hyperspace, the
graphical user interface which allows users to enter, access and in- teract with Epic
data.
Question 7.
Define: Component
Correct Answer: Each of the sections of content on the dash- board is a
component. Components built by administrators are source records Components
built by end-users are person- alization records.
,Question 8.
Define: Personalization
Correct Answer: Dashboards and components which are created by an
administrators are referred to as source records. When an end user selects a
source dash- board from the Analytics Catalog, a person- alized copy is created
just for them. End user personalized copies of these source dashboards and
components are considered personalization records.
Question 9.
Define: Dashboard Editor
Correct Answer: Create and edit source dashboard records with the dashboard
editor. Access the editor with Chart Search, editing a dashboard from the Analytics
Catalog, or editing a dashboard from the Proxy Dash- board prompt. 6 forms
controls the dashboard's content & metadata: 1. Basic Information 2. Layout 3.
Content 4. Resource Settings 5. Parameters 6. Access
Question 10.
Additional Information: Dashboard Editor
Correct Answer: Dashboards should be tailored to their au- dience and tested to
ensure they work. Guidelines for creating and editing Radar content: -Any
dashboard available to a user must work -All parts of a dashboard must work
-Dashboards must have a defined target audience -Each user in that audience must
have secu- rity/access for all components and reports on dashboard
Question 11.
Define: Component Editor
Correct Answer: Accessed via Chart Search for Component Editor - Six types of
component records in Radar 1. Graph 2. Link 3. Message Board 4. Native HTML 5.
Report Listing 6. Table
Question 12.
Additional Information: Component Edi- tor
Correct Answer: Components have Five Forms 1. Basic Information 2. Display 3.
Data Source 4. Output Format 5. Access Similar to the Dashboard Editor, each form
controls your component's content and its metadata.
Question 13.
Define Activity Descriptor
Correct Answer: The Active activity descriptor field displays for your currently
active Hyperspace activity. There are two Hyperspace workflows that can find the
activity descriptor for a given activity.
,Question 14.
Hyperspace workflow 1: Find Activity De- scriptor
Correct Answer: Activity: Create a component which has a header that is able to
take you to the Component Editor directly from your Radar dashboard. 1. Access
the about Hyperspace information window 2. Double-check that you are currently in
the Component Editor activity 3. Access the About Hyperspace window by
navigating to the Epic button > Help > About Hyperspace. 4. The Active activity
descriptor field displays for your currently active Hyperspace activity.
Question 15.
Hyperspace workflow 2: Find Activity De- scriptor
Correct Answer: Activity Descriptor in the Menu Summary: End-users often request
links to activities that you lack the security to access. Thus you can not determine
the activity descriptor from the About Hyperspace workflow. For these instances,
use the following workflow. 1. Use Chart Search to launch the Menu Summary
activity. 2. Refer to pg. 2-22 for scenario. 3. Because Admin is under the Epic
button, start by expanding EDMAINAPPMENU 4. Any menu that is displayed
visually to the end-user will be listed under the caption. 5. Expand the Admin
sub-menu 6. Expand the Access Management sub-menu 7. Select User Security
Activity Descriptor is located in the Activ- ity Information section. User Security is
E_EMP_EMPGUI
Question 16.
Perform Task: Create and edit dashboards
Correct Answer: Run through the following Exercises/Exam- ples 1. pg. 2-11 Radar
Exploration
Question 17.
Perform Task: Navigate the Dashboard Ed- itor
Correct Answer: Run through the following Exercises/Exam- ples 1. pg. 2-13
Dashboard Editor
Question 18.
Perform Task: Determine the order that components will appear on a dashboard
Correct Answer: 1. Use Chart Search to open Dashboard Ed- itor 2. Click on
Content from left menu, from here you can quickly access the Component Editor to
edit a given component on the dashboard. 3. Note: all components on the
dashboard must be marked as Ready for use before the dashboard can be marked
as Ready for Use 4. To manage the component list, press F4 to insert a blank line in
the table of compo- nents. 5. To remove a line, select the line and press SHIFT+F4 6.
To move a selected component higher or lower in the component list, use the up
and down arrows to the right of the component.
, Question 19.
Perform Task: Configure a component header to launch an activity
Correct Answer: 1. Via the Component Editor go to the Dis- play section 2. Enter the
activity descriptor for the Hyper- space activity that launches if a user clicks the
clicks the component header. 3. To find the activity descriptor (refer to previous
cards, 14, 15, and 16)
Question 20.
Perform Task: Configure a link component pt 1.
Correct Answer: Two Methods: 1. Linking from the component header 2. Listing
multiple activities in a Link compo- nent Jumping to a Hyperspace activity isn't like
linking to a website, it requires a unique link to identify a single Hyperspace
activity. Two work flows to find the activity descriptor for a given activity. (refer to
previous cards, 14, 15, & 16)
Question 21.
Perform Task: Configure a link component pt 2.
Correct Answer: 1. Use the Component Editor to create a new component called
"your initials" link Com- ponent 2. Fill out the appropriate Display Format for a link
component -2 options for Data Source - Component Record: specify links in the
component you are currently building -Code Template: specify a code template
and/or routine to populate your links, not used by analysts 3. Choose a Data source
of "Component Record" 4. Give your component help test, a mean- ingful Display
title and a default Color 5. On the Output Format form, Insert a new URL of your
choice to your Link component. (give the new URL a label. - Web site URLs should
include http:// or https// - Enter a Tooltip for your URL 6. Add "Administration" to
the Allowed re- port groups so you will be able to add this component through
personalization 7. Make sure you component is marked as READY FOR USE 8.
Close out the Component Editor 9. Open your Dashboard via the Dashboard Editor
10. Add the component to the Content form of your dashboard 11. Launch the
dashboard to view the com- ponent ( Refresh with ALT+=
Question 22.
Explain Concept: Dashboard-level person- alization
Correct Answer: Several dashboard attributes can be cus- tomized by any end user
with personaliza- tion security. Including the following: - Changing the display title -
Changing the dashboard description - Rearranging the components - Add new
components from the Analytics Catalog -Change the names and colors of compo-
nents on a dashboard The aforementioned features are stored on the
personalization record, and will not im- pact the source dashboard.
Questions and Answers with 100% Correct Answers
Question 1.
1. Assuming a user has the appropriate user role to access a dashboard, what oth- er
dashboard settings control whether the dashboard is available for viewing?
Correct Answer: The Ready for use and Enabled for user se- lection check boxes.
Question 2.
2. Which of the following would you enter in the Parameters field of an activity link to open
a Hyperspace activity? a. The activity descriptor and any required parameters for the
activity. b. The menu descriptor of the activity. c. The user-facing name of the activity. d.
the parent menu of the activity record.
Correct Answer: a. The activity descriptor and any required parameters for the
activity.
Question 3.
3. You have built a component record. Which of the following could explain why the
component does not appear on a spe- cific dashboard? a. The component is not set as
ready for use. b. The component is not listed on the Con- tent form of the dashboard. c.
The component and the dashboard do not share any report groups. d. The component
has not been marked as enabled for user selection.
Correct Answer: Both: a. The component is not set as ready for use. b. The
component is not listed on the Con- tent form of the dashboard.
Question 4.
True or False: Components require a defined Display ti- tle on the Display form.
Correct Answer: True: this is a required field.
Question 5.
Study Checklist: Chapter 2
Correct Answer:
Question 6.
Define: Dashboard
Correct Answer: Dashboards centralize content from around Hyperspace, the
graphical user interface which allows users to enter, access and in- teract with Epic
data.
Question 7.
Define: Component
Correct Answer: Each of the sections of content on the dash- board is a
component. Components built by administrators are source records Components
built by end-users are person- alization records.
,Question 8.
Define: Personalization
Correct Answer: Dashboards and components which are created by an
administrators are referred to as source records. When an end user selects a
source dash- board from the Analytics Catalog, a person- alized copy is created
just for them. End user personalized copies of these source dashboards and
components are considered personalization records.
Question 9.
Define: Dashboard Editor
Correct Answer: Create and edit source dashboard records with the dashboard
editor. Access the editor with Chart Search, editing a dashboard from the Analytics
Catalog, or editing a dashboard from the Proxy Dash- board prompt. 6 forms
controls the dashboard's content & metadata: 1. Basic Information 2. Layout 3.
Content 4. Resource Settings 5. Parameters 6. Access
Question 10.
Additional Information: Dashboard Editor
Correct Answer: Dashboards should be tailored to their au- dience and tested to
ensure they work. Guidelines for creating and editing Radar content: -Any
dashboard available to a user must work -All parts of a dashboard must work
-Dashboards must have a defined target audience -Each user in that audience must
have secu- rity/access for all components and reports on dashboard
Question 11.
Define: Component Editor
Correct Answer: Accessed via Chart Search for Component Editor - Six types of
component records in Radar 1. Graph 2. Link 3. Message Board 4. Native HTML 5.
Report Listing 6. Table
Question 12.
Additional Information: Component Edi- tor
Correct Answer: Components have Five Forms 1. Basic Information 2. Display 3.
Data Source 4. Output Format 5. Access Similar to the Dashboard Editor, each form
controls your component's content and its metadata.
Question 13.
Define Activity Descriptor
Correct Answer: The Active activity descriptor field displays for your currently
active Hyperspace activity. There are two Hyperspace workflows that can find the
activity descriptor for a given activity.
,Question 14.
Hyperspace workflow 1: Find Activity De- scriptor
Correct Answer: Activity: Create a component which has a header that is able to
take you to the Component Editor directly from your Radar dashboard. 1. Access
the about Hyperspace information window 2. Double-check that you are currently in
the Component Editor activity 3. Access the About Hyperspace window by
navigating to the Epic button > Help > About Hyperspace. 4. The Active activity
descriptor field displays for your currently active Hyperspace activity.
Question 15.
Hyperspace workflow 2: Find Activity De- scriptor
Correct Answer: Activity Descriptor in the Menu Summary: End-users often request
links to activities that you lack the security to access. Thus you can not determine
the activity descriptor from the About Hyperspace workflow. For these instances,
use the following workflow. 1. Use Chart Search to launch the Menu Summary
activity. 2. Refer to pg. 2-22 for scenario. 3. Because Admin is under the Epic
button, start by expanding EDMAINAPPMENU 4. Any menu that is displayed
visually to the end-user will be listed under the caption. 5. Expand the Admin
sub-menu 6. Expand the Access Management sub-menu 7. Select User Security
Activity Descriptor is located in the Activ- ity Information section. User Security is
E_EMP_EMPGUI
Question 16.
Perform Task: Create and edit dashboards
Correct Answer: Run through the following Exercises/Exam- ples 1. pg. 2-11 Radar
Exploration
Question 17.
Perform Task: Navigate the Dashboard Ed- itor
Correct Answer: Run through the following Exercises/Exam- ples 1. pg. 2-13
Dashboard Editor
Question 18.
Perform Task: Determine the order that components will appear on a dashboard
Correct Answer: 1. Use Chart Search to open Dashboard Ed- itor 2. Click on
Content from left menu, from here you can quickly access the Component Editor to
edit a given component on the dashboard. 3. Note: all components on the
dashboard must be marked as Ready for use before the dashboard can be marked
as Ready for Use 4. To manage the component list, press F4 to insert a blank line in
the table of compo- nents. 5. To remove a line, select the line and press SHIFT+F4 6.
To move a selected component higher or lower in the component list, use the up
and down arrows to the right of the component.
, Question 19.
Perform Task: Configure a component header to launch an activity
Correct Answer: 1. Via the Component Editor go to the Dis- play section 2. Enter the
activity descriptor for the Hyper- space activity that launches if a user clicks the
clicks the component header. 3. To find the activity descriptor (refer to previous
cards, 14, 15, and 16)
Question 20.
Perform Task: Configure a link component pt 1.
Correct Answer: Two Methods: 1. Linking from the component header 2. Listing
multiple activities in a Link compo- nent Jumping to a Hyperspace activity isn't like
linking to a website, it requires a unique link to identify a single Hyperspace
activity. Two work flows to find the activity descriptor for a given activity. (refer to
previous cards, 14, 15, & 16)
Question 21.
Perform Task: Configure a link component pt 2.
Correct Answer: 1. Use the Component Editor to create a new component called
"your initials" link Com- ponent 2. Fill out the appropriate Display Format for a link
component -2 options for Data Source - Component Record: specify links in the
component you are currently building -Code Template: specify a code template
and/or routine to populate your links, not used by analysts 3. Choose a Data source
of "Component Record" 4. Give your component help test, a mean- ingful Display
title and a default Color 5. On the Output Format form, Insert a new URL of your
choice to your Link component. (give the new URL a label. - Web site URLs should
include http:// or https// - Enter a Tooltip for your URL 6. Add "Administration" to
the Allowed re- port groups so you will be able to add this component through
personalization 7. Make sure you component is marked as READY FOR USE 8.
Close out the Component Editor 9. Open your Dashboard via the Dashboard Editor
10. Add the component to the Content form of your dashboard 11. Launch the
dashboard to view the com- ponent ( Refresh with ALT+=
Question 22.
Explain Concept: Dashboard-level person- alization
Correct Answer: Several dashboard attributes can be cus- tomized by any end user
with personaliza- tion security. Including the following: - Changing the display title -
Changing the dashboard description - Rearranging the components - Add new
components from the Analytics Catalog -Change the names and colors of compo-
nents on a dashboard The aforementioned features are stored on the
personalization record, and will not im- pact the source dashboard.
