OSHA 510 Practice Test Questions with
Verified Correct Answers
General Duty Clause Section 5(a)(1)
Employees shall have a place of employment which are free from recognized hazards that are
causing or are likely to cause death or serious physical harm to his employees.
Osha was not allowed to use?
State Level standards.
Osha is a part of the?
Department of Labor
The 4 types of OSHA Standards by Industry are...
1.)General Industry
2.)Construction 29 CFR 1926
3.)Maritime
4.)Agriculture
The 2 types of Application of Standards are
1.)Horizontal- apply to all industry.
2.)Vertical- apply to a specific industry or type of equipment.
OSHA Directives
are used to ensure consistent enforcement of osha regulations
What are the 4 Inspection Priorities
, 1.)Imminent Danger
2.)Fatalities and Catastrophes
3.)Employee Complaints/Referrals
4.)Programmed High-Hazard Inspections
What is the first thing they will do in the inspection process?
Compliance officer displays official credentials.
Types of Violations
1.)De Minimus
2.)Other than serious
3.)Serious
4.)Willfull
5.)Repeated
6.)Failure to abate
7.)Regulatory
8.)Other
Appeals by Employers. Employers may contest either citation, abatement period, or
proposed penalty within...
15 working days of receipt through written "Notice of Contest"
Under the Multi-Employer Citation Policy, Which category is usually the one cited for
safety violation?
Exposing Employer
What are the three record keeping forms?
Verified Correct Answers
General Duty Clause Section 5(a)(1)
Employees shall have a place of employment which are free from recognized hazards that are
causing or are likely to cause death or serious physical harm to his employees.
Osha was not allowed to use?
State Level standards.
Osha is a part of the?
Department of Labor
The 4 types of OSHA Standards by Industry are...
1.)General Industry
2.)Construction 29 CFR 1926
3.)Maritime
4.)Agriculture
The 2 types of Application of Standards are
1.)Horizontal- apply to all industry.
2.)Vertical- apply to a specific industry or type of equipment.
OSHA Directives
are used to ensure consistent enforcement of osha regulations
What are the 4 Inspection Priorities
, 1.)Imminent Danger
2.)Fatalities and Catastrophes
3.)Employee Complaints/Referrals
4.)Programmed High-Hazard Inspections
What is the first thing they will do in the inspection process?
Compliance officer displays official credentials.
Types of Violations
1.)De Minimus
2.)Other than serious
3.)Serious
4.)Willfull
5.)Repeated
6.)Failure to abate
7.)Regulatory
8.)Other
Appeals by Employers. Employers may contest either citation, abatement period, or
proposed penalty within...
15 working days of receipt through written "Notice of Contest"
Under the Multi-Employer Citation Policy, Which category is usually the one cited for
safety violation?
Exposing Employer
What are the three record keeping forms?
