NCIDQ IDFX PRACTICE EXAM - COMPLETE QUESTIONS AND DETAILED SOLUTIONS LATEST
UPDATE THIS YEAR JUST RELEASED
Question 1: What is a reference standard specification?
Answer:
This document describes the requirements for a product or process
based on an accepted authority or test method, such as ASTM, ANSI, or
a trade association
Question 2: What is a discount rate?
Answer:
This is a number used to convert future costs to their equivalent present
values
Question 3: What is a cost index and how is it used?
Answer:
This number relates construction or other costs to a base amount. It is
used to account for the variables or geographical location and inflation
over time
Question 4: On an interior construction project, what is a
contractors typical profit range (as a percentage)?
Answer:
5% to 15% is a typical range for this budget item on an interior
construction project
Question 5: Which finish material for woodwork provides the
hardest, most durable surface?
Answer:
,When used as a finish material for woodwork, polyester has these
characteristics
Question 6: In regard to building codes, what are reference
standards?
Answer:
These are standards written by standards-writing organizations (rather
than by the authors of a particular building code) that are made part of a
code by specific reference
Question 7: What are two types of glazing that can be used in
hazardous locations,and what test must they pass?
Answer:
Two materials that can be used for this application are tempered glaze
and laminated glass, but only if they pass the requirements of 16 CFR
1201, Category II
Question 8: What is a common path of egress travel?
Answer:
This is the portion of an exit access that occupants are required to
traverse before two separate and distinct paths of egress travel to two
exits become available
Question 9: What is an area of refuge?
Answer:
This is an area of a building where persons unable to use stairways can
safely await instructions or assistance during an emergency evacuation
Question 10: How is the Uniform Commercial Code (UCC)
important to interior design projects?
,Answer:
This document governs the sale of goods in the United States and is
applicable to the purchase and delivery of furniture and other moveable
items
Question 11: What is a public way?
Answer:
This is any street, alley, or similar parcel of land unobstructed from the
ground to the sky that is at least 10 ft wide an permanently appropriated
to the public
Question 12: If an object is between 27" and 80" above the floor,
what is the maximum allowable protrusion of that object from the
wall?
Answer:
Under these conditions, an object must not protrude more than 4" from a
wall
Question 13: What is a pivot?
Answer:
This is a type of hardware used to hang doors. It consists of a rotating
bottom pin and a corresponding pin at the top of the door
Question 14: What form does a vendor or contractor use to request
a payment from the owner?
Answer:
An Application for Payment for is used for this
Question 15: What are two main factors in determining if a space
require two exits rather than just one?
, Answer:
The two main factors that determine how many of these are required are
the space's occupancy and its occupant load
Question 16: What two types of contracts are typically used on
large commercial interior design projects?
Answer:
This type of project calls for two contract types:
Question 17: -construction contract -contract for furniture,
fixtures,and equipment
A. How does a fluorescent lamp produce light?
Answer:
In this type of lamp, an electric arc is formed, generating ultraviolet light.
When this light strikes the phosphor coating on the inside of the lamp,
the phosphor fluoresces, generating visible light
Question 18: What is an exit passageway?
Answer:
This is a horizontal fully enclosed, fire-resistance-rated portion of an exit
that is used only as a means of egress to an exit discharge or public way
Question 19: What is an occupant load factor?
Answer:
This is the amount of floor space that a building code presumes is
occupied by one person in a particular occupancy
Question 20: Under what conditions would a wood veneer not have
to adhere to flame spread requirements?
Answer:
UPDATE THIS YEAR JUST RELEASED
Question 1: What is a reference standard specification?
Answer:
This document describes the requirements for a product or process
based on an accepted authority or test method, such as ASTM, ANSI, or
a trade association
Question 2: What is a discount rate?
Answer:
This is a number used to convert future costs to their equivalent present
values
Question 3: What is a cost index and how is it used?
Answer:
This number relates construction or other costs to a base amount. It is
used to account for the variables or geographical location and inflation
over time
Question 4: On an interior construction project, what is a
contractors typical profit range (as a percentage)?
Answer:
5% to 15% is a typical range for this budget item on an interior
construction project
Question 5: Which finish material for woodwork provides the
hardest, most durable surface?
Answer:
,When used as a finish material for woodwork, polyester has these
characteristics
Question 6: In regard to building codes, what are reference
standards?
Answer:
These are standards written by standards-writing organizations (rather
than by the authors of a particular building code) that are made part of a
code by specific reference
Question 7: What are two types of glazing that can be used in
hazardous locations,and what test must they pass?
Answer:
Two materials that can be used for this application are tempered glaze
and laminated glass, but only if they pass the requirements of 16 CFR
1201, Category II
Question 8: What is a common path of egress travel?
Answer:
This is the portion of an exit access that occupants are required to
traverse before two separate and distinct paths of egress travel to two
exits become available
Question 9: What is an area of refuge?
Answer:
This is an area of a building where persons unable to use stairways can
safely await instructions or assistance during an emergency evacuation
Question 10: How is the Uniform Commercial Code (UCC)
important to interior design projects?
,Answer:
This document governs the sale of goods in the United States and is
applicable to the purchase and delivery of furniture and other moveable
items
Question 11: What is a public way?
Answer:
This is any street, alley, or similar parcel of land unobstructed from the
ground to the sky that is at least 10 ft wide an permanently appropriated
to the public
Question 12: If an object is between 27" and 80" above the floor,
what is the maximum allowable protrusion of that object from the
wall?
Answer:
Under these conditions, an object must not protrude more than 4" from a
wall
Question 13: What is a pivot?
Answer:
This is a type of hardware used to hang doors. It consists of a rotating
bottom pin and a corresponding pin at the top of the door
Question 14: What form does a vendor or contractor use to request
a payment from the owner?
Answer:
An Application for Payment for is used for this
Question 15: What are two main factors in determining if a space
require two exits rather than just one?
, Answer:
The two main factors that determine how many of these are required are
the space's occupancy and its occupant load
Question 16: What two types of contracts are typically used on
large commercial interior design projects?
Answer:
This type of project calls for two contract types:
Question 17: -construction contract -contract for furniture,
fixtures,and equipment
A. How does a fluorescent lamp produce light?
Answer:
In this type of lamp, an electric arc is formed, generating ultraviolet light.
When this light strikes the phosphor coating on the inside of the lamp,
the phosphor fluoresces, generating visible light
Question 18: What is an exit passageway?
Answer:
This is a horizontal fully enclosed, fire-resistance-rated portion of an exit
that is used only as a means of egress to an exit discharge or public way
Question 19: What is an occupant load factor?
Answer:
This is the amount of floor space that a building code presumes is
occupied by one person in a particular occupancy
Question 20: Under what conditions would a wood veneer not have
to adhere to flame spread requirements?
Answer:
