NCCER 26411
NCCER 26411
Study online at https://quizlet.com/_fx1npa
1. Proof tests are made at _______. 60% of the original factory
20% of the original factory voltage voltage
35% of the original factory voltage
40% of the original factory voltage
60% of the original factory voltage
2. The type of termination that only provides some form Class 3 termination
of electric stress control for the cable insulation shield
terminus is a .
Class 1 termination
Class 2 termination
Class 3 termination
Class 4 termination
3. Which termination class is the only one that provides Class 1
a seal against the external environment?
Class 1
Class 2
Class 3
Class 5
4. A suitable connector for medium-voltage cable splices crimp type
is a compression or .
mechanical type
split-bolt type
crimp type
molded type
5. A quick test that can be made to determine if an instal- go/no-go test
lation is good is known as a(n) .
adequacy test
go/no-go test
1/4
NCCER 26411
Study online at https://quizlet.com/_fx1npa
1. Proof tests are made at _______. 60% of the original factory
20% of the original factory voltage voltage
35% of the original factory voltage
40% of the original factory voltage
60% of the original factory voltage
2. The type of termination that only provides some form Class 3 termination
of electric stress control for the cable insulation shield
terminus is a .
Class 1 termination
Class 2 termination
Class 3 termination
Class 4 termination
3. Which termination class is the only one that provides Class 1
a seal against the external environment?
Class 1
Class 2
Class 3
Class 5
4. A suitable connector for medium-voltage cable splices crimp type
is a compression or .
mechanical type
split-bolt type
crimp type
molded type
5. A quick test that can be made to determine if an instal- go/no-go test
lation is good is known as a(n) .
adequacy test
go/no-go test
1/4
