NCCER study guide Module 1 Basic Safety
NCCER study guide Module 1 Basic Safety
Study online at https://quizlet.com/_8rtjor
1. Companies with strong safety cultures usually have turnover
lower _ .
2. Safety is a learned behavior and attitude. T/F TRUE
3. Poor lighting, excessive noise, inadequate guards for unsafe conditions
moving parts are examples of _ _.
4. The activity that consists of breaking a job into its com- job safety analysis
ponent task and then analyzing each step for potential
hazards is called _ _ _ .
5. The measure of probability, consequences, and expo- Risk
sure related to an event is referred to as _ .
6. If there is a hole in the floor of a structure, the pre- cover the opening and la-
ferred method of protecting workers from falls is to _ bel the cover
______.
7. The D-ring or support point on a safety harness should in the middle of the back
be placed _ _ _ _ _ _ .
8. A personal fall arrest system should be inspected competent person
monthly by a _ _ .
9. Lanyards that have no shock-absorbing features are positioning
used for _ .
10. When placing a ladder against a platform or roof, the 3 feet (91 cm)
top of the ladder should extend above the point where
the ladder touches the platform or roof by at least _ _
_.
11.
1/3
Page 1
NCCER study guide Module 1 Basic Safety
Study online at https://quizlet.com/_8rtjor
1. Companies with strong safety cultures usually have turnover
lower _ .
2. Safety is a learned behavior and attitude. T/F TRUE
3. Poor lighting, excessive noise, inadequate guards for unsafe conditions
moving parts are examples of _ _.
4. The activity that consists of breaking a job into its com- job safety analysis
ponent task and then analyzing each step for potential
hazards is called _ _ _ .
5. The measure of probability, consequences, and expo- Risk
sure related to an event is referred to as _ .
6. If there is a hole in the floor of a structure, the pre- cover the opening and la-
ferred method of protecting workers from falls is to _ bel the cover
______.
7. The D-ring or support point on a safety harness should in the middle of the back
be placed _ _ _ _ _ _ .
8. A personal fall arrest system should be inspected competent person
monthly by a _ _ .
9. Lanyards that have no shock-absorbing features are positioning
used for _ .
10. When placing a ladder against a platform or roof, the 3 feet (91 cm)
top of the ladder should extend above the point where
the ladder touches the platform or roof by at least _ _
_.
11.
1/3
Page 1
