TFM 12 Fire Alarm Technical Exam Update 2026
Questions and Correct Answers Rated A+ 2026 /
2027 Verified by Experts
Terms in this set (185)
[Circuits/Pathways] Within NFPA 72 Correct answer: Chapter 12 (Choice B). Why:
(2019), pathway/circuit class NFPA 72 Chapter 12 covers Circuits and Pathways,
requirements (Class A, B, X, etc.) are including pathway class designations. Chapter 17
primarily found in which chapter? is initiating devices, Chapter 18 notification,
A) Chapter 10 | B) Chapter 12 | C) Chapter 23 protected premises systems.
Chapter 17 | D) Chapter 23
[ITM/Documentation] Inspection, Correct answer: Chapter 14 (Choice B). Why:
testing, and maintenance (ITM) NFPA 72 Chapter 14 contains the inspection,
requirements and frequencies live testing, and maintenance tables and frequencies
in which NFPA 72 chapter? A) - a frequently tested area.
Chapter 7 | B) Chapter 14 | C)
Chapter 18 | D) Chapter 21
[Interfaces/Other Standards] Correct answer: Chapter 21 (Choice C). Why:
Emergency control functions such NFPA 72 Chapter 21 covers Emergency Control
as elevator recall, HVAC shutdown, Function Interfaces - elevator recall/shutdown,
and releasing interfaces are HVAC control, door release, and releasing
addressed in which NFPA 72 service interfaces.
chapter? A) Chapter 12 | B) Chapter
17 | C) Chapter 21 | D) Chapter 24
,[General] Requirements for Correct answer: Chapter 23 (Choice C). Why:
protected premises (local) fire NFPA 72 Chapter 23 covers Protected Premises
alarm systems are found in which Fire Alarm Systems. Chapter 26 covers
NFPA 72 chapter? A) Chapter 14 | B) supervising station systems (central, proprietary,
Chapter 18 | C) Chapter 23 | D) remote).
Chapter 26
[Signals] An alarm signal is best Correct answer: An emergency condition
defined as a signal indicating: A) A requiring immediate action, such as a fire (Choice
fault in the system wiring or C). Why: An alarm signal indicates an emergency
components | B) An off-normal requiring immediate action. It is distinct from
condition in protective equipment trouble (faults) and supervisory (off-normal
that needs investigation | C) An equipment) signals.
emergency condition requiring
immediate action, such as a fire | D)
A scheduled system self-test in
progress
[Signals] A trouble signal indicates: Correct answer: A fault in the system's wiring or
A) A confirmed fire condition | B) A components requiring service (Choice B). Why: A
fault in the system's wiring or trouble signal denotes a fault - an open, ground,
components requiring service | C) or loss of power. It calls for service, not
Water flowing in a sprinkler riser | evacuation.
D) A valve in the off-normal
position
, [Signals] A supervisory signal Correct answer: An off-normal condition in
indicates: A) Smoke or fire is protective equipment, such as a closed sprinkler
present in the protected area | B) valve (Choice C). Why: Supervisory signals
An open circuit in a notification indicate that protective equipment is off-normal
appliance circuit | C) An off-normal (valve position, pressure, pump status) and needs
condition in protective equipment, investigation - not an emergency, not a wiring
such as a closed sprinkler valve | D) fault.
A low battery in the control unit
[Signals] A valve tamper switch on a Correct answer: Supervisory (Choice C). Why: A
sprinkler control valve generates tamper switch monitors that the valve stays in its
which type of signal? A) Alarm | B) normal open position. A partially or fully closed
Trouble | C) Supervisory | D) Pre- valve is an off-normal protective-equipment
alarm condition - supervisory.
[Signals] Until acknowledged, a Correct answer: 60 seconds (Choice C). Why:
trouble signal at the control unit Trouble signals must re-sound at least every 60
must re-sound at least once every: seconds (24-hour audible re-annunciation may
A) 10 seconds | B) 30 seconds | C) be reduced only under specific allowances) so
60 seconds | D) 5 minutes the fault is not ignored.
[Signals] When multiple signal types Correct answer: Alarm, supervisory, trouble
are present, the correct priority (Choice C). Why: Alarm takes precedence over all
order (highest to lowest) is others, followed by supervisory, then trouble.
generally: A) Trouble, supervisory, Alarm > Supervisory > Trouble.
alarm | B) Supervisory, alarm,
trouble | C) Alarm, supervisory,
trouble | D) Alarm, trouble,
supervisory
Questions and Correct Answers Rated A+ 2026 /
2027 Verified by Experts
Terms in this set (185)
[Circuits/Pathways] Within NFPA 72 Correct answer: Chapter 12 (Choice B). Why:
(2019), pathway/circuit class NFPA 72 Chapter 12 covers Circuits and Pathways,
requirements (Class A, B, X, etc.) are including pathway class designations. Chapter 17
primarily found in which chapter? is initiating devices, Chapter 18 notification,
A) Chapter 10 | B) Chapter 12 | C) Chapter 23 protected premises systems.
Chapter 17 | D) Chapter 23
[ITM/Documentation] Inspection, Correct answer: Chapter 14 (Choice B). Why:
testing, and maintenance (ITM) NFPA 72 Chapter 14 contains the inspection,
requirements and frequencies live testing, and maintenance tables and frequencies
in which NFPA 72 chapter? A) - a frequently tested area.
Chapter 7 | B) Chapter 14 | C)
Chapter 18 | D) Chapter 21
[Interfaces/Other Standards] Correct answer: Chapter 21 (Choice C). Why:
Emergency control functions such NFPA 72 Chapter 21 covers Emergency Control
as elevator recall, HVAC shutdown, Function Interfaces - elevator recall/shutdown,
and releasing interfaces are HVAC control, door release, and releasing
addressed in which NFPA 72 service interfaces.
chapter? A) Chapter 12 | B) Chapter
17 | C) Chapter 21 | D) Chapter 24
,[General] Requirements for Correct answer: Chapter 23 (Choice C). Why:
protected premises (local) fire NFPA 72 Chapter 23 covers Protected Premises
alarm systems are found in which Fire Alarm Systems. Chapter 26 covers
NFPA 72 chapter? A) Chapter 14 | B) supervising station systems (central, proprietary,
Chapter 18 | C) Chapter 23 | D) remote).
Chapter 26
[Signals] An alarm signal is best Correct answer: An emergency condition
defined as a signal indicating: A) A requiring immediate action, such as a fire (Choice
fault in the system wiring or C). Why: An alarm signal indicates an emergency
components | B) An off-normal requiring immediate action. It is distinct from
condition in protective equipment trouble (faults) and supervisory (off-normal
that needs investigation | C) An equipment) signals.
emergency condition requiring
immediate action, such as a fire | D)
A scheduled system self-test in
progress
[Signals] A trouble signal indicates: Correct answer: A fault in the system's wiring or
A) A confirmed fire condition | B) A components requiring service (Choice B). Why: A
fault in the system's wiring or trouble signal denotes a fault - an open, ground,
components requiring service | C) or loss of power. It calls for service, not
Water flowing in a sprinkler riser | evacuation.
D) A valve in the off-normal
position
, [Signals] A supervisory signal Correct answer: An off-normal condition in
indicates: A) Smoke or fire is protective equipment, such as a closed sprinkler
present in the protected area | B) valve (Choice C). Why: Supervisory signals
An open circuit in a notification indicate that protective equipment is off-normal
appliance circuit | C) An off-normal (valve position, pressure, pump status) and needs
condition in protective equipment, investigation - not an emergency, not a wiring
such as a closed sprinkler valve | D) fault.
A low battery in the control unit
[Signals] A valve tamper switch on a Correct answer: Supervisory (Choice C). Why: A
sprinkler control valve generates tamper switch monitors that the valve stays in its
which type of signal? A) Alarm | B) normal open position. A partially or fully closed
Trouble | C) Supervisory | D) Pre- valve is an off-normal protective-equipment
alarm condition - supervisory.
[Signals] Until acknowledged, a Correct answer: 60 seconds (Choice C). Why:
trouble signal at the control unit Trouble signals must re-sound at least every 60
must re-sound at least once every: seconds (24-hour audible re-annunciation may
A) 10 seconds | B) 30 seconds | C) be reduced only under specific allowances) so
60 seconds | D) 5 minutes the fault is not ignored.
[Signals] When multiple signal types Correct answer: Alarm, supervisory, trouble
are present, the correct priority (Choice C). Why: Alarm takes precedence over all
order (highest to lowest) is others, followed by supervisory, then trouble.
generally: A) Trouble, supervisory, Alarm > Supervisory > Trouble.
alarm | B) Supervisory, alarm,
trouble | C) Alarm, supervisory,
trouble | D) Alarm, trouble,
supervisory
