AIM BLOCK 1 FINAL EXAM NEWEST WITH
COMPLETE QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS //GRADED A+//LATEST –
2026 ALREADY GRADED A+
The standard sea level pressure is:
29.92" Hg. at 59 degrees F
Of the three temperature scales, which one is
used the least?
Rankine
Which of the following statements is true?
Water vapor weighs 5/8's as much as dry air
When air holds water vapor, it:
Is lighter than dry air
Page 1 of 24
,This inspection method is used to detect surface
cracks, pits, subsurface cracks, corrosion on
inner surfaces, and to determine alloy and heat-
treat condition:
Eddy Current
This inspection method is a method for detecting
cracks, laps, seams, voids, pits, subsurface holes,
and other surface, or slightly subsurface,
discontinuities in ferro-magnetic materials:
Magnetic Particle
A good inspection process to use on nonporous
metal and nonmetal components to find material
discontinuities that are open to the surface which
may not be evident to normal visual inspection is:
Dye Penetrant
Page 2 of 24
, An NDI inspection technique that uses sound
energy moving through the test specimen to
detect flaws is commonly known as:
Ultrasonic Inspection
The aspect ratio of an aircraft wing is defined as
the ratio of the:
Wingspan to the mean chord.
Which of the following statements concerning
density is correct?
If the air pressure is decreased, the density of the
air decreases.
The amount of water vapor present in the air is
called:
Humidity
An aircraft's movement around its vertical axis is
controlled by the:
Page 3 of 24
COMPLETE QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS //GRADED A+//LATEST –
2026 ALREADY GRADED A+
The standard sea level pressure is:
29.92" Hg. at 59 degrees F
Of the three temperature scales, which one is
used the least?
Rankine
Which of the following statements is true?
Water vapor weighs 5/8's as much as dry air
When air holds water vapor, it:
Is lighter than dry air
Page 1 of 24
,This inspection method is used to detect surface
cracks, pits, subsurface cracks, corrosion on
inner surfaces, and to determine alloy and heat-
treat condition:
Eddy Current
This inspection method is a method for detecting
cracks, laps, seams, voids, pits, subsurface holes,
and other surface, or slightly subsurface,
discontinuities in ferro-magnetic materials:
Magnetic Particle
A good inspection process to use on nonporous
metal and nonmetal components to find material
discontinuities that are open to the surface which
may not be evident to normal visual inspection is:
Dye Penetrant
Page 2 of 24
, An NDI inspection technique that uses sound
energy moving through the test specimen to
detect flaws is commonly known as:
Ultrasonic Inspection
The aspect ratio of an aircraft wing is defined as
the ratio of the:
Wingspan to the mean chord.
Which of the following statements concerning
density is correct?
If the air pressure is decreased, the density of the
air decreases.
The amount of water vapor present in the air is
called:
Humidity
An aircraft's movement around its vertical axis is
controlled by the:
Page 3 of 24
