CETA ETA Exam Questions with 100%
Verified Correct Answers
When did the CET certification program begin
1965
When did ETA initiate certification maintenance?
1996
All ETA certification categories require the passage of the associate CET Examination?
False
To qualify for Master CET, the examiner must attain a score of 85% on each separate
exam
False
an associate CET cannot attempt one of the specialty exams?
False
master CET is lifetime and does not require re certification?
True
The journeyman level:
75% passing, 2 years of work, and specialization
Certification maintenance requires payment of a fee and retesting or proving at least 40
hours of upgrade retraining within a four year period
True
,a worker may become certified by ETA as a CST without also becomming certified as a
CET?
True
The associate CET exam may be taken after the journeyman exam
False
B+, or supply voltages in electronics products, is considered to be:
+12 to 300 VDC
Leakage current in an electronic product, between either of the AC power cord
conductors and the chassis or any exposed metal parts should not exceed____
500 microamps
Shaded components on the electronics schematics mean:
only exact replacement parts may be used
Ingested solder fumes or particles _____
are toxic
Second degree skin burns should _____.
not be treated with ice and bandage pack
rules describing the fire or toxicity retardant types of cabling which may be installed in
buildings is contained in:
NEC Article 770
ESD and static discharge is most destructive to _______.
, CMOS semiconductors
If you have never received formal training and practiced CPR on a person or dummy,
in the event of finding a fellow worker not breathing, you ___
should not attempt it, but call for help
when working at heights above 6 feet, a _____ is required by OSHA rules.
full body harness attached to a lanyard which prevents more than a 6' drop
residual voltage is associated with ______.
charge retained by capacitors
The atomic number of an element is the same as the element atomic weight
False
An increase in voltage with resistance held constant cause current to ____
Increase
The ampere, expresses ____
a unit of charge movement per second past a given point
The total resistance of a parallel circuit containing equal branch resistance is found by
the following:
By dividing the resistance value of a branch by the number of branches
Maximum power transfer occurs when the load impedance is equal to the source
impedance
True
Verified Correct Answers
When did the CET certification program begin
1965
When did ETA initiate certification maintenance?
1996
All ETA certification categories require the passage of the associate CET Examination?
False
To qualify for Master CET, the examiner must attain a score of 85% on each separate
exam
False
an associate CET cannot attempt one of the specialty exams?
False
master CET is lifetime and does not require re certification?
True
The journeyman level:
75% passing, 2 years of work, and specialization
Certification maintenance requires payment of a fee and retesting or proving at least 40
hours of upgrade retraining within a four year period
True
,a worker may become certified by ETA as a CST without also becomming certified as a
CET?
True
The associate CET exam may be taken after the journeyman exam
False
B+, or supply voltages in electronics products, is considered to be:
+12 to 300 VDC
Leakage current in an electronic product, between either of the AC power cord
conductors and the chassis or any exposed metal parts should not exceed____
500 microamps
Shaded components on the electronics schematics mean:
only exact replacement parts may be used
Ingested solder fumes or particles _____
are toxic
Second degree skin burns should _____.
not be treated with ice and bandage pack
rules describing the fire or toxicity retardant types of cabling which may be installed in
buildings is contained in:
NEC Article 770
ESD and static discharge is most destructive to _______.
, CMOS semiconductors
If you have never received formal training and practiced CPR on a person or dummy,
in the event of finding a fellow worker not breathing, you ___
should not attempt it, but call for help
when working at heights above 6 feet, a _____ is required by OSHA rules.
full body harness attached to a lanyard which prevents more than a 6' drop
residual voltage is associated with ______.
charge retained by capacitors
The atomic number of an element is the same as the element atomic weight
False
An increase in voltage with resistance held constant cause current to ____
Increase
The ampere, expresses ____
a unit of charge movement per second past a given point
The total resistance of a parallel circuit containing equal branch resistance is found by
the following:
By dividing the resistance value of a branch by the number of branches
Maximum power transfer occurs when the load impedance is equal to the source
impedance
True
