Mass 1A Hoisting Exam Questions &
Answers (Grade A+)
Where should a license or temporary permit be located during time
of operation of equipment -
correct answer ✅Shall be carried ON the person at all times; in the
case of a temporary permit the person shall also carry their drivers
license
Whats the fine for violating section 53, 53a or 54 -
correct answer ✅No less than $500 and no more than $3,000, or
by imprisonment of no more than 3 months, or both fine and
imprisonment
Whats the fine for permitting an unlicensed person to operate
machinery -
correct answer ✅No less than $1,000 and no more than $3,000, or
imprisonment of no more than 3 months, or both fine and
imprisonment
Whats the fine for violating section 42 to 51, or prevents an
inspector from entering the premises -
correct answer ✅No less than $10 no more than $300, or by
imprisonment of upto 3 months
,Mass 1A Hoisting Exam Questions &
Answers (Grade A+)
Whats the purpose of 520CMR 6.00 -
correct answer ✅To establish reasonable requirements to protect
the public safety of the citizens of the commonwealth from the
hazards inherent in the operation of housting machinery by
establishing min standards neccessary to obtain a hoisting
machinery operators license or temp permit
ANSI -
correct answer ✅American National Standards Institute
Apprentice license -
correct answer ✅A document issued by the dept upon proof of
registratio at a training facility and with the division of apprentice
training within the dept of labor standards, which enables the
holder to operate hoisting machinery under the direct guidance
and supervision of a duly licensed person licensed to operate the
category of hoisting machinery for which documentation is issued
ASME -
correct answer ✅American Society of Mechanical Engineers
,Mass 1A Hoisting Exam Questions &
Answers (Grade A+)
cargo -
correct answer ✅A load, quantity or volume that can be processed
or transported
Apprentice licensee -
correct answer ✅A person, 18 or older, registered with the dept of
labor standards and has obtained an apprentice license to operate
while under direct guidance and supervision of a duly licensed
person
Chief -
correct answer ✅The chief of inspections-mechanical of the dept
of public safety
Compact hoisting machinery -
correct answer ✅Machinery wirh a gross vehicle weight not
exceeding 10,000 lbs, excluding Class 1, Class 3 and Class 4 hoisting
machinery as listed in 520CMR 6.10. Machinery operated under
temp permit may not exceed 8,000lbs
DAT -
correct answer ✅Division of Apprentice Training
, Mass 1A Hoisting Exam Questions &
Answers (Grade A+)
Department -
correct answer ✅Dept of Public Safety
DOT -
correct answer ✅Department of Transportation
Emergency procedure -
correct answer ✅Actions required to be taken when imminent
danger may occur to prevent damage to life, property, or to public
safety
Company license -
correct answer ✅Issued by an exempt company that has a dept
approved in service training program and is only valid for machinery
used on company property
fork lift -
correct answer ✅Any mobile powered truck used to carry, push,
lift, stack or tier materials, EXCLUDING earth moving, over the road
haulage trucks and equipment which was designed to move earth
but modified to accept forks
Answers (Grade A+)
Where should a license or temporary permit be located during time
of operation of equipment -
correct answer ✅Shall be carried ON the person at all times; in the
case of a temporary permit the person shall also carry their drivers
license
Whats the fine for violating section 53, 53a or 54 -
correct answer ✅No less than $500 and no more than $3,000, or
by imprisonment of no more than 3 months, or both fine and
imprisonment
Whats the fine for permitting an unlicensed person to operate
machinery -
correct answer ✅No less than $1,000 and no more than $3,000, or
imprisonment of no more than 3 months, or both fine and
imprisonment
Whats the fine for violating section 42 to 51, or prevents an
inspector from entering the premises -
correct answer ✅No less than $10 no more than $300, or by
imprisonment of upto 3 months
,Mass 1A Hoisting Exam Questions &
Answers (Grade A+)
Whats the purpose of 520CMR 6.00 -
correct answer ✅To establish reasonable requirements to protect
the public safety of the citizens of the commonwealth from the
hazards inherent in the operation of housting machinery by
establishing min standards neccessary to obtain a hoisting
machinery operators license or temp permit
ANSI -
correct answer ✅American National Standards Institute
Apprentice license -
correct answer ✅A document issued by the dept upon proof of
registratio at a training facility and with the division of apprentice
training within the dept of labor standards, which enables the
holder to operate hoisting machinery under the direct guidance
and supervision of a duly licensed person licensed to operate the
category of hoisting machinery for which documentation is issued
ASME -
correct answer ✅American Society of Mechanical Engineers
,Mass 1A Hoisting Exam Questions &
Answers (Grade A+)
cargo -
correct answer ✅A load, quantity or volume that can be processed
or transported
Apprentice licensee -
correct answer ✅A person, 18 or older, registered with the dept of
labor standards and has obtained an apprentice license to operate
while under direct guidance and supervision of a duly licensed
person
Chief -
correct answer ✅The chief of inspections-mechanical of the dept
of public safety
Compact hoisting machinery -
correct answer ✅Machinery wirh a gross vehicle weight not
exceeding 10,000 lbs, excluding Class 1, Class 3 and Class 4 hoisting
machinery as listed in 520CMR 6.10. Machinery operated under
temp permit may not exceed 8,000lbs
DAT -
correct answer ✅Division of Apprentice Training
, Mass 1A Hoisting Exam Questions &
Answers (Grade A+)
Department -
correct answer ✅Dept of Public Safety
DOT -
correct answer ✅Department of Transportation
Emergency procedure -
correct answer ✅Actions required to be taken when imminent
danger may occur to prevent damage to life, property, or to public
safety
Company license -
correct answer ✅Issued by an exempt company that has a dept
approved in service training program and is only valid for machinery
used on company property
fork lift -
correct answer ✅Any mobile powered truck used to carry, push,
lift, stack or tier materials, EXCLUDING earth moving, over the road
haulage trucks and equipment which was designed to move earth
but modified to accept forks
