OSHA Final Exam Newest Exam 2026 | All Questions
and Correct Answers | Verified Answers | Brand New
Version | Just Released
If work is to be performed near overhead lines, the lines must be __________or
other protective measures must be provided before work is started ------------
Correct Answer--------------------both a and c
According to safe work practices for deenergizing equipment, each tag must
contain a statement: ------------Correct Answer--------------------prohibiting
unauthorized operation of the disconnecting means and removal of the tag
Conductors emerging from the ground must be enclosed in approved raceways ---
---------Correct Answer--------------------true
A limit switch or other device must be provided to prevent the load block from
passing the safe upper limit of travel of any hoisting mechanism ------------Correct
Answer--------------------true
The third step to controlling a hazard when handling spills or leaks is ------------
Correct Answer--------------------contain the material
,The ____ the flash point, the _____the hazard ------------Correct Answer--------------
------lower, greater
When vapors of a flammable or combustible liquid are mixed with air in the
proper proportions in the presence of a source of ignition, rapid combustion or an
explosion can occur ------------Correct Answer--------------------true
Which of the following is prohibited to use for storage of a flammable or
combustible liquid? ------------Correct Answer--------------------open metal container
inside a storage cabinent
Portable fire extinguishment and control equipment must be provided ------------
Correct Answer--------------------in such quantities and types as are needed for the
special hazards of operation and storage
Transferring flammable liquids by mean of air pressure on the container or
portable tanks is acceptable ------------Correct Answer--------------------false
Materials which react with water must not be stored in the same room with
flammable or combustible liquids ------------Correct Answer--------------------true
,Storage cabinets must be designed and constructed to limit the internal
temperature to not more than 325F when subjected to a standardized 10-minute
fire test ------------Correct Answer--------------------true
In every inside storage room, there must be maintained an aisle of at least 3 feet
wide ------------Correct Answer--------------------true
Flammable liquids are more dangerous than combustible liquids since they have
flashpoints ____ degrees F and may be ignited at room temperature ------------
Correct Answer--------------------below 100
Exposure to electrical hazards from work on, near or with conductors or
equipment in electri utilization installations, which is covered by electrical
regulation, is also covered by lockout/tagout requirments ------------Correct
Answer--------------------false
Lockout devices and tagout devices must indicate the identity of: ------------Correct
Answer--------------------the employee attaching the device
Prior to starting work on machines or equipment that have been ocked out or
tagged out, the authorized employee must verify that__________ and
, deenergization of the machine or equipment have been accomplished ------------
Correct Answer--------------------isolation
The employer must have certification that employee training has been
accomplished that includes: ------------Correct Answer--------------------both a and b
Tags and theri means of attachment must be made of materials which will
withstand ------------Correct Answer--------------------any conditions in the workplace
Which of the following is covered by the lockout/tagout standard? ------------
Correct Answer--------------------the control of energy during servicing and/or
maintenance of machines and equipment
In the the case of tagout devices, print and format criteria does not need to be
standerdized ------------Correct Answer--------------------false
It is important that the employer conduct a periodic inspection of the energy
control procedure at least __________ to ensure that the procedure and the
requirements of this standard are being followed ------------Correct Answer----------
----------annually
and Correct Answers | Verified Answers | Brand New
Version | Just Released
If work is to be performed near overhead lines, the lines must be __________or
other protective measures must be provided before work is started ------------
Correct Answer--------------------both a and c
According to safe work practices for deenergizing equipment, each tag must
contain a statement: ------------Correct Answer--------------------prohibiting
unauthorized operation of the disconnecting means and removal of the tag
Conductors emerging from the ground must be enclosed in approved raceways ---
---------Correct Answer--------------------true
A limit switch or other device must be provided to prevent the load block from
passing the safe upper limit of travel of any hoisting mechanism ------------Correct
Answer--------------------true
The third step to controlling a hazard when handling spills or leaks is ------------
Correct Answer--------------------contain the material
,The ____ the flash point, the _____the hazard ------------Correct Answer--------------
------lower, greater
When vapors of a flammable or combustible liquid are mixed with air in the
proper proportions in the presence of a source of ignition, rapid combustion or an
explosion can occur ------------Correct Answer--------------------true
Which of the following is prohibited to use for storage of a flammable or
combustible liquid? ------------Correct Answer--------------------open metal container
inside a storage cabinent
Portable fire extinguishment and control equipment must be provided ------------
Correct Answer--------------------in such quantities and types as are needed for the
special hazards of operation and storage
Transferring flammable liquids by mean of air pressure on the container or
portable tanks is acceptable ------------Correct Answer--------------------false
Materials which react with water must not be stored in the same room with
flammable or combustible liquids ------------Correct Answer--------------------true
,Storage cabinets must be designed and constructed to limit the internal
temperature to not more than 325F when subjected to a standardized 10-minute
fire test ------------Correct Answer--------------------true
In every inside storage room, there must be maintained an aisle of at least 3 feet
wide ------------Correct Answer--------------------true
Flammable liquids are more dangerous than combustible liquids since they have
flashpoints ____ degrees F and may be ignited at room temperature ------------
Correct Answer--------------------below 100
Exposure to electrical hazards from work on, near or with conductors or
equipment in electri utilization installations, which is covered by electrical
regulation, is also covered by lockout/tagout requirments ------------Correct
Answer--------------------false
Lockout devices and tagout devices must indicate the identity of: ------------Correct
Answer--------------------the employee attaching the device
Prior to starting work on machines or equipment that have been ocked out or
tagged out, the authorized employee must verify that__________ and
, deenergization of the machine or equipment have been accomplished ------------
Correct Answer--------------------isolation
The employer must have certification that employee training has been
accomplished that includes: ------------Correct Answer--------------------both a and b
Tags and theri means of attachment must be made of materials which will
withstand ------------Correct Answer--------------------any conditions in the workplace
Which of the following is covered by the lockout/tagout standard? ------------
Correct Answer--------------------the control of energy during servicing and/or
maintenance of machines and equipment
In the the case of tagout devices, print and format criteria does not need to be
standerdized ------------Correct Answer--------------------false
It is important that the employer conduct a periodic inspection of the energy
control procedure at least __________ to ensure that the procedure and the
requirements of this standard are being followed ------------Correct Answer----------
----------annually
