NICET Inspection And Test Level 1 Practice Exam
NICET Inspection And Test Level 1 Practice Exam
Study online at https://quizlet.com/_i8c7ug
1. Equipment that is inaccessible for safety considera- 18 months
tions may be inspected during the next scheduled
shutdown, but at intervals not exceeding ___.
2. When smoke detectors are used for door release appli- 5
cations, the detector should be mounted on the wall or
ceiling within ___ feet of the door?
3. The standby power requirement for a proprietary su- 24/5
pervising station fire alarm system, is ___ hours in nor-
mal operation/ ___ minutes in alarm?
4. The secondary power supply for fire alarm systems 24/5
shall have sufficient capacity to operate the fire alarm
system under quiescent load for a minimum of ___
hours and at the end of that period shall be capable
of operating all alarm notification appliances used for
evacuation or to direct aid to the location of an emer-
gency for ___ minutes?
5. Wall mounted spot type heat sensing fire detectors 4
shall be located on the wall not less than ___ inches
from the ceiling?
6. The standby power requirement for a protected 24/5
premises fire alarm system, is ___ hours in normal op-
eration / ___ minutes in alarm?
7. Which of the following is required to be delivered to Record Of Completion
the owner upon final acceptance of the system? (One)
8. What is the periodic testing frequency of a DACR? Monthly
, NICET Inspection And Test Level 1 Practice Exam
NICET Inspection And Test Level 1 Practice Exam
Study online at https://quizlet.com/_i8c7ug
9. A notification appliance that alerts by the sense of Tactile
touch or vibration is known as ___?
10. A feature of automatic fire detection and alarm sys- Alarm Verification
tems to reduce unwanted alarms wherein smoke de-
tectors report alarm conditions for a minimum period
of time or confirm alarm conditions within a given time
after being reset in order to be accepted as a valid
alarm initiation signal is known as ___?
11. An example of performance-based technology permit- IP Transmission
ted by NFPA 72 for communication with the supervis-
ing station is ___?
12. Notification appliances shall include on their name- Audible Or Visible Rated
plates reference to ___? Performance
13. Consider the use of visible notification appliances in 16
sleeping areas. For rooms with a linear dimension
greater than 16 feet, the visible appliance shall be lo-
cated with in ___ feet of the pillow?
14. The total sound pressure level shall not exceed ___ dBA. 110
15. A wire to wire short on a notification appliance circuit Trouble
shall result in a ___ signal.
16. In the absence of specific performance based design 30
criteria, the distance between smoke detectors shall
not exceed a nominal spacing of ___ feet?
17. What is the proper minimum mounting height of a 42" To The Actuator
manual fire alarm box?
NICET Inspection And Test Level 1 Practice Exam
Study online at https://quizlet.com/_i8c7ug
1. Equipment that is inaccessible for safety considera- 18 months
tions may be inspected during the next scheduled
shutdown, but at intervals not exceeding ___.
2. When smoke detectors are used for door release appli- 5
cations, the detector should be mounted on the wall or
ceiling within ___ feet of the door?
3. The standby power requirement for a proprietary su- 24/5
pervising station fire alarm system, is ___ hours in nor-
mal operation/ ___ minutes in alarm?
4. The secondary power supply for fire alarm systems 24/5
shall have sufficient capacity to operate the fire alarm
system under quiescent load for a minimum of ___
hours and at the end of that period shall be capable
of operating all alarm notification appliances used for
evacuation or to direct aid to the location of an emer-
gency for ___ minutes?
5. Wall mounted spot type heat sensing fire detectors 4
shall be located on the wall not less than ___ inches
from the ceiling?
6. The standby power requirement for a protected 24/5
premises fire alarm system, is ___ hours in normal op-
eration / ___ minutes in alarm?
7. Which of the following is required to be delivered to Record Of Completion
the owner upon final acceptance of the system? (One)
8. What is the periodic testing frequency of a DACR? Monthly
, NICET Inspection And Test Level 1 Practice Exam
NICET Inspection And Test Level 1 Practice Exam
Study online at https://quizlet.com/_i8c7ug
9. A notification appliance that alerts by the sense of Tactile
touch or vibration is known as ___?
10. A feature of automatic fire detection and alarm sys- Alarm Verification
tems to reduce unwanted alarms wherein smoke de-
tectors report alarm conditions for a minimum period
of time or confirm alarm conditions within a given time
after being reset in order to be accepted as a valid
alarm initiation signal is known as ___?
11. An example of performance-based technology permit- IP Transmission
ted by NFPA 72 for communication with the supervis-
ing station is ___?
12. Notification appliances shall include on their name- Audible Or Visible Rated
plates reference to ___? Performance
13. Consider the use of visible notification appliances in 16
sleeping areas. For rooms with a linear dimension
greater than 16 feet, the visible appliance shall be lo-
cated with in ___ feet of the pillow?
14. The total sound pressure level shall not exceed ___ dBA. 110
15. A wire to wire short on a notification appliance circuit Trouble
shall result in a ___ signal.
16. In the absence of specific performance based design 30
criteria, the distance between smoke detectors shall
not exceed a nominal spacing of ___ feet?
17. What is the proper minimum mounting height of a 42" To The Actuator
manual fire alarm box?
