NICET Fire Alarm Level I Practice Exam
NICET Fire Alarm Level I Practice Exam
Study online at https://quizlet.com/_jqxl62
1. The minimum clear working distance from an ener- 3
gized 240 V breaker panel that has the cover removed
is _____ feet from the wall in front of the panel?
OSHA
2. Who is responsible for inspection, testing and main- Building owner
tenance of the fire alarm system?
NFPA 72, 14.2.3.1
3. According to NFPA 72, the term "Shall" refers to A mandatory requirement
_____?
NFPA 72, 3.2.6
4. The operable part of a manually actuated alarm ini- 42, 48
tiating device shall be not less than _____inches and
not more than ___ inches from the finished floor?
NFPA 72, 17.15.6
5. Consider ¾" flexible conduit where flexibility is re- 3
quired after installation. The length from the last
point where the raceway is securely fastened shall
not exceed _____ feet. NFPA 70-348.30(A), Exception 2
6. Circuit integrity cables (CI) shall be supported at a dis- 24
tance not exceeding _____ inches? NFPA 70-760.24(B)
7. Which of these symbols represent a smoke detector? A
, NICET Fire Alarm Level I Practice Exam
NICET Fire Alarm Level I Practice Exam
Study online at https://quizlet.com/_jqxl62
8. The acronym DACT stands for _____? NFPA 72-26.6.4.1 Digital alarm communicator
transmitter
9. A pathway shall be designated as Class _____ when it D
has failsafe operation, where no fault is enunciated,
but the intended operation is performed in the event
of a pathway failure? NFPA 72-12.3.4
10. The standby power requirement for a proprietary
supervising station fire alarm system, is _____ hours
in normal operation / _____ minutes in alarm? NFPA
72-10.6.7.2.1
11. To make connections with the public switched tele- Off-hook
phone network in preparation for dialing a telephone
number is known as _____? NFPA 72-3.3.197
12. The location of the branch circuit over current pro- Red marking, Accessible only
tective device shall be permanently identified at the to qualified personnel, Iden-
fire alarm control unit. Which of the following is a re- tified as FIRE ALARM CIRCUIT
quirement of the circuit disconnecting means? NFPA
70-760.121(B)
13. When installing fire alarm cable in a hoistway, EMT
the cable shall be installed using _____? NFPA
70-760.131(B)(3)
14. Fire alarm cables used for survivability of critical cir- CI
cuits shall be listed as _____ cable? NFPA 70-760.2
15. Responsibility for maintenance, inspection and test- Building owner
ing of the fire alarm system resides with _____? NFPA
72-14.2.3.1
NICET Fire Alarm Level I Practice Exam
Study online at https://quizlet.com/_jqxl62
1. The minimum clear working distance from an ener- 3
gized 240 V breaker panel that has the cover removed
is _____ feet from the wall in front of the panel?
OSHA
2. Who is responsible for inspection, testing and main- Building owner
tenance of the fire alarm system?
NFPA 72, 14.2.3.1
3. According to NFPA 72, the term "Shall" refers to A mandatory requirement
_____?
NFPA 72, 3.2.6
4. The operable part of a manually actuated alarm ini- 42, 48
tiating device shall be not less than _____inches and
not more than ___ inches from the finished floor?
NFPA 72, 17.15.6
5. Consider ¾" flexible conduit where flexibility is re- 3
quired after installation. The length from the last
point where the raceway is securely fastened shall
not exceed _____ feet. NFPA 70-348.30(A), Exception 2
6. Circuit integrity cables (CI) shall be supported at a dis- 24
tance not exceeding _____ inches? NFPA 70-760.24(B)
7. Which of these symbols represent a smoke detector? A
, NICET Fire Alarm Level I Practice Exam
NICET Fire Alarm Level I Practice Exam
Study online at https://quizlet.com/_jqxl62
8. The acronym DACT stands for _____? NFPA 72-26.6.4.1 Digital alarm communicator
transmitter
9. A pathway shall be designated as Class _____ when it D
has failsafe operation, where no fault is enunciated,
but the intended operation is performed in the event
of a pathway failure? NFPA 72-12.3.4
10. The standby power requirement for a proprietary
supervising station fire alarm system, is _____ hours
in normal operation / _____ minutes in alarm? NFPA
72-10.6.7.2.1
11. To make connections with the public switched tele- Off-hook
phone network in preparation for dialing a telephone
number is known as _____? NFPA 72-3.3.197
12. The location of the branch circuit over current pro- Red marking, Accessible only
tective device shall be permanently identified at the to qualified personnel, Iden-
fire alarm control unit. Which of the following is a re- tified as FIRE ALARM CIRCUIT
quirement of the circuit disconnecting means? NFPA
70-760.121(B)
13. When installing fire alarm cable in a hoistway, EMT
the cable shall be installed using _____? NFPA
70-760.131(B)(3)
14. Fire alarm cables used for survivability of critical cir- CI
cuits shall be listed as _____ cable? NFPA 70-760.2
15. Responsibility for maintenance, inspection and test- Building owner
ing of the fire alarm system resides with _____? NFPA
72-14.2.3.1
