FDNY G-60 PRACTICE EXAM 2026
QUESTIONS AND CORRECT ANSWERS
WITH DETAILED EXPLANATIONS
CERTIFICATE OF FITNESS TORCH USE OF
FLAMMABLE GAS
All gas containers and the related equipment - CORRECT ANSWER-must
be protected from extreme temperature and physical damage.
Any single standard portable LPG container must not exceed - CORRECT
ANSWER-100 lbs in weight.
Any single CNG container must not exceed - CORRECT ANSWER-381
SCF.
Permits shall be readily available on the premise for inspection by -
CORRECT ANSWER-Fire Department representatives.
NFPA stands for - CORRECT ANSWER-National Fire Protection
Association.
, Most common fuel gases used in blowtorches are - CORRECT ANSWER-
LPG (e.g. butane, propane), natural gas (methane) (either CNG or piped
natural gas).
A fire guard is responsible for - CORRECT ANSWER-overseeing torch
operations.
The pre-hot work check must be conducted by - CORRECT ANSWER-the
responsible person before hot work is authorized and at least once per day.
The check reports must be kept at the work site - CORRECT ANSWER-
maintained on the premises for a minimum of 48 hours after work is
complete.
Exhaust fans - CORRECT ANSWER-may be used to draw the fumes away
from the work area
The workers should - CORRECT ANSWER-wear flame resistant gloves
and aprons and should not be worm Clothing with pockets or cuffs All torch
operators, an oxigen-fuel torch using any amount of oxigen and flamable
gas and fire guards must have a current - CORRECT ANSWER-Certificate
of Fitness
The Certificate of Fitness holder - CORRECT ANSWER-must regulate the
pressure and flow of oxygen and natural gas to each torch.
QUESTIONS AND CORRECT ANSWERS
WITH DETAILED EXPLANATIONS
CERTIFICATE OF FITNESS TORCH USE OF
FLAMMABLE GAS
All gas containers and the related equipment - CORRECT ANSWER-must
be protected from extreme temperature and physical damage.
Any single standard portable LPG container must not exceed - CORRECT
ANSWER-100 lbs in weight.
Any single CNG container must not exceed - CORRECT ANSWER-381
SCF.
Permits shall be readily available on the premise for inspection by -
CORRECT ANSWER-Fire Department representatives.
NFPA stands for - CORRECT ANSWER-National Fire Protection
Association.
, Most common fuel gases used in blowtorches are - CORRECT ANSWER-
LPG (e.g. butane, propane), natural gas (methane) (either CNG or piped
natural gas).
A fire guard is responsible for - CORRECT ANSWER-overseeing torch
operations.
The pre-hot work check must be conducted by - CORRECT ANSWER-the
responsible person before hot work is authorized and at least once per day.
The check reports must be kept at the work site - CORRECT ANSWER-
maintained on the premises for a minimum of 48 hours after work is
complete.
Exhaust fans - CORRECT ANSWER-may be used to draw the fumes away
from the work area
The workers should - CORRECT ANSWER-wear flame resistant gloves
and aprons and should not be worm Clothing with pockets or cuffs All torch
operators, an oxigen-fuel torch using any amount of oxigen and flamable
gas and fire guards must have a current - CORRECT ANSWER-Certificate
of Fitness
The Certificate of Fitness holder - CORRECT ANSWER-must regulate the
pressure and flow of oxygen and natural gas to each torch.
