ELECTRICAL JOB INFORMATION EXAM WITH
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+
Practice questions for this set
Learn 1 /7 Study with Learn
? copper conductors have a smaller outside diameter and are cheaper to
manufacture than ? copper conductors.
Choose an answer
1 Small / large 2 Underground / overhead
3 Wide / narrow 4 Solid / stranded
Don't know?
Terms in this set (122)
,? is a keen sense of what to do or Tact
say in order to maintain good
relations with others or avoid
offense.
It is safe to throw or toss a tool to False
someone on a scaffold only under
certain conditions.
Burns are the most common shock- True
related injury. An electrical accident
can result in an electrical burn, arc
burn, thermal contact burn, or a
combination of burns.
If a space contains a material that Permit Space
has the potential for engulfing an
entrant, it is considered a ? .
? are a type of aerial work platform Vertical Mast Lifts
that are able to fit into tight spaces
because their design generally
allows for a small footprint.
, What are some of the things that I. and II.
can be done to make cutting and
threading conduit a neater job?
I. Use a container for the scraps.
II. Use a sandbox or mat to catch oil
drippings.
III. Use pre-threaded conduit.
IV. Use two people to do the job
safely.
For entry rescue, the employer can False
only plan on using an on-site
rescue team (consisting of its own
or another contractor's employees)
even if an offsite team could
respond in time to provide rescue.
An entry supervisor also may serve True
as an attendant or as an authorized
entrant, as long as that person is
trained and equipped as required
by this standard for each role he or
she fills.
? identify all confined spaces in All employers
which their workers may work and
determine whether any are permit
spaces.
A properly-installed ? has a low Grounding Conductor
resistance to ground and greatly
reduces the amount of current that
passes through the body.
A common but perhaps overlooked Earth
conductor is the surface or
subsurface of the ? .
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+
Practice questions for this set
Learn 1 /7 Study with Learn
? copper conductors have a smaller outside diameter and are cheaper to
manufacture than ? copper conductors.
Choose an answer
1 Small / large 2 Underground / overhead
3 Wide / narrow 4 Solid / stranded
Don't know?
Terms in this set (122)
,? is a keen sense of what to do or Tact
say in order to maintain good
relations with others or avoid
offense.
It is safe to throw or toss a tool to False
someone on a scaffold only under
certain conditions.
Burns are the most common shock- True
related injury. An electrical accident
can result in an electrical burn, arc
burn, thermal contact burn, or a
combination of burns.
If a space contains a material that Permit Space
has the potential for engulfing an
entrant, it is considered a ? .
? are a type of aerial work platform Vertical Mast Lifts
that are able to fit into tight spaces
because their design generally
allows for a small footprint.
, What are some of the things that I. and II.
can be done to make cutting and
threading conduit a neater job?
I. Use a container for the scraps.
II. Use a sandbox or mat to catch oil
drippings.
III. Use pre-threaded conduit.
IV. Use two people to do the job
safely.
For entry rescue, the employer can False
only plan on using an on-site
rescue team (consisting of its own
or another contractor's employees)
even if an offsite team could
respond in time to provide rescue.
An entry supervisor also may serve True
as an attendant or as an authorized
entrant, as long as that person is
trained and equipped as required
by this standard for each role he or
she fills.
? identify all confined spaces in All employers
which their workers may work and
determine whether any are permit
spaces.
A properly-installed ? has a low Grounding Conductor
resistance to ground and greatly
reduces the amount of current that
passes through the body.
A common but perhaps overlooked Earth
conductor is the surface or
subsurface of the ? .
