GYPSUM CONSTRUCTION HANDBOOK QUIZ WITH 100% CORRECT
ANSWERS!!!! ALREADY GRADED A+
A minimum temperature is required during gypsum board application. This minimum temperature is
__________.
36 ° F
32 ° F
50 ° F
45 ° F - (answer)50 ° F
When mixing, the water is added to plaster in ___ stage(s).
three
four
two
one - (answer)three
What is the minimum length of drywall screw used to attach double-layer gypsum panels to steel
framing?
16d double-headed
1" Type S bugle head
1" Type W bugle head
1-5/8" Type S bugle head - (answer)1-5/8" Type S bugle head
Space metal furring channels 24" on center at ______ angles to bar joists or other structural members.
right
obtuse
,GYPSUM CONSTRUCTION HANDBOOK QUIZ WITH 100% CORRECT
ANSWERS!!!! ALREADY GRADED A+
acute
congruent - (answer)right
When attaching a corner bead to the board in wood construction, the spacing of fasteners should be at
__________.
9 inch intervals in both flanges
9 inch intervals in one flange.
12 inch intervals in one flange
12 inch intervals in both flanges. - (answer)9 inch intervals in both flanges
When attaching a resilient channel to a steel stud flange, the fastener to be used is a(n) __________.
3/8 inch Type S bugle head fastener
3/4 inch Type S pan head screw
3/8 inch Type S pan head screw - (answer)3/8 inch Type S pan head screw
Of the following, which is a limitation of using gypsum panels?
During construction, factory-produced panels do not contribute moisture.
The gypsum core does not support combustion.
Gypsum panels are NOT recommended for use in solar or other heating systems when the board is in
contact with surfaces exceeding 125° F.
Gypsum panels are easily cut and quickly installed with minimum cost. - (answer)Gypsum panels are NOT
recommended for use in solar or other heating systems when the board is in contact with surfaces
exceeding 125° F.
, GYPSUM CONSTRUCTION HANDBOOK QUIZ WITH 100% CORRECT
ANSWERS!!!! ALREADY GRADED A+
The type of fastener used to attach a double-layer 5/8" gypsum board panels to a steel channel is a(n)
__________.
16d double-headed
1-5/8" Type S bugle head
1" Type S bugle head
1" Type W bugle head - (answer)1-5/8" Type S bugle head
What color should the gypsum be when applying a veneer plaster finish?
green
brown
purple
blue - (answer)blue
Which of the factors determine the drying conditions of veneer plaster?
Air movement
Temperature
Humidity
Time of Day - (answer)Time of Day
The gypsum board that is classified as fire resistance is _______.
Type M
Type F
Type X
ANSWERS!!!! ALREADY GRADED A+
A minimum temperature is required during gypsum board application. This minimum temperature is
__________.
36 ° F
32 ° F
50 ° F
45 ° F - (answer)50 ° F
When mixing, the water is added to plaster in ___ stage(s).
three
four
two
one - (answer)three
What is the minimum length of drywall screw used to attach double-layer gypsum panels to steel
framing?
16d double-headed
1" Type S bugle head
1" Type W bugle head
1-5/8" Type S bugle head - (answer)1-5/8" Type S bugle head
Space metal furring channels 24" on center at ______ angles to bar joists or other structural members.
right
obtuse
,GYPSUM CONSTRUCTION HANDBOOK QUIZ WITH 100% CORRECT
ANSWERS!!!! ALREADY GRADED A+
acute
congruent - (answer)right
When attaching a corner bead to the board in wood construction, the spacing of fasteners should be at
__________.
9 inch intervals in both flanges
9 inch intervals in one flange.
12 inch intervals in one flange
12 inch intervals in both flanges. - (answer)9 inch intervals in both flanges
When attaching a resilient channel to a steel stud flange, the fastener to be used is a(n) __________.
3/8 inch Type S bugle head fastener
3/4 inch Type S pan head screw
3/8 inch Type S pan head screw - (answer)3/8 inch Type S pan head screw
Of the following, which is a limitation of using gypsum panels?
During construction, factory-produced panels do not contribute moisture.
The gypsum core does not support combustion.
Gypsum panels are NOT recommended for use in solar or other heating systems when the board is in
contact with surfaces exceeding 125° F.
Gypsum panels are easily cut and quickly installed with minimum cost. - (answer)Gypsum panels are NOT
recommended for use in solar or other heating systems when the board is in contact with surfaces
exceeding 125° F.
, GYPSUM CONSTRUCTION HANDBOOK QUIZ WITH 100% CORRECT
ANSWERS!!!! ALREADY GRADED A+
The type of fastener used to attach a double-layer 5/8" gypsum board panels to a steel channel is a(n)
__________.
16d double-headed
1-5/8" Type S bugle head
1" Type S bugle head
1" Type W bugle head - (answer)1-5/8" Type S bugle head
What color should the gypsum be when applying a veneer plaster finish?
green
brown
purple
blue - (answer)blue
Which of the factors determine the drying conditions of veneer plaster?
Air movement
Temperature
Humidity
Time of Day - (answer)Time of Day
The gypsum board that is classified as fire resistance is _______.
Type M
Type F
Type X
