Period 1 v2.0 Boilermakers Local 169
Exam Questions & Answers (Grade A+)
When welding, if ventilation is not adequate or practical, you
should wear: -
correct answer ✅A respirator
Water should only be used to extinguish: -
correct answer ✅Ordinary Combustibles
A shell, suspension system and chinstrap are all parts of a: -
correct answer ✅Hardhat
The frames of all portable motors, welding machines, air
compressors, electric hoists, all that operate at more than __
should be grounded -
correct answer ✅50 Volts.
To have fire, you must have fuel, heat, and: -
correct answer ✅Oxygen or air.
Light oxygen cutting on a plate under 1" thick requires a filter lens
with a minimum protective shade of: -
correct answer ✅3
,Period 1 v2.0 Boilermakers Local 169
Exam Questions & Answers (Grade A+)
When using a ladder to access another level, secure and extend the
ladder at least ____ above the landing point to provide a safe
handhold: -
correct answer ✅3'
When working in a confined space, all covers and doors should be: -
correct answer ✅Be open or completely removed
Employers must develop a written ____ program and procedure
and train employees to take steps to isolate energy sources before
starting work. -
correct answer ✅Lockout/tagout/tryout
Pants with ___ should not be worn when welding. -
correct answer ✅Cuffs
Do not enter a confined space unless a __ is outside -
correct answer ✅Watch person
___ Protect the instep area from impact and compression -
correct answer ✅Metatarsal Guards
, Period 1 v2.0 Boilermakers Local 169
Exam Questions & Answers (Grade A+)
Which of the following is not an OSHA Requirement for riggers? -
correct answer ✅Riggers must be a graduate apprentice
Welding processes using __ produce larger amounts of ultraviolet
radiation than those using most other shielding gasses. -
correct answer ✅Argon
A hardhat should not be worn: -
correct answer ✅Backwards when rigging
Cylinders should be stored in __ position -
correct answer ✅An Upright
OSHA Defines a ___ Person as "One who is capable of identifying
existing and predictable hazards in the surroundings or working
conditions, which are unsanitary hazardous to employees, and who
has authorization to take prompt corrective measures to eliminate
them." -
correct answer ✅Competent
In accordance with OSHA standards, supported scaffolds with a
height-to-base of more than ___ shall be restrained from tipping by
Exam Questions & Answers (Grade A+)
When welding, if ventilation is not adequate or practical, you
should wear: -
correct answer ✅A respirator
Water should only be used to extinguish: -
correct answer ✅Ordinary Combustibles
A shell, suspension system and chinstrap are all parts of a: -
correct answer ✅Hardhat
The frames of all portable motors, welding machines, air
compressors, electric hoists, all that operate at more than __
should be grounded -
correct answer ✅50 Volts.
To have fire, you must have fuel, heat, and: -
correct answer ✅Oxygen or air.
Light oxygen cutting on a plate under 1" thick requires a filter lens
with a minimum protective shade of: -
correct answer ✅3
,Period 1 v2.0 Boilermakers Local 169
Exam Questions & Answers (Grade A+)
When using a ladder to access another level, secure and extend the
ladder at least ____ above the landing point to provide a safe
handhold: -
correct answer ✅3'
When working in a confined space, all covers and doors should be: -
correct answer ✅Be open or completely removed
Employers must develop a written ____ program and procedure
and train employees to take steps to isolate energy sources before
starting work. -
correct answer ✅Lockout/tagout/tryout
Pants with ___ should not be worn when welding. -
correct answer ✅Cuffs
Do not enter a confined space unless a __ is outside -
correct answer ✅Watch person
___ Protect the instep area from impact and compression -
correct answer ✅Metatarsal Guards
, Period 1 v2.0 Boilermakers Local 169
Exam Questions & Answers (Grade A+)
Which of the following is not an OSHA Requirement for riggers? -
correct answer ✅Riggers must be a graduate apprentice
Welding processes using __ produce larger amounts of ultraviolet
radiation than those using most other shielding gasses. -
correct answer ✅Argon
A hardhat should not be worn: -
correct answer ✅Backwards when rigging
Cylinders should be stored in __ position -
correct answer ✅An Upright
OSHA Defines a ___ Person as "One who is capable of identifying
existing and predictable hazards in the surroundings or working
conditions, which are unsanitary hazardous to employees, and who
has authorization to take prompt corrective measures to eliminate
them." -
correct answer ✅Competent
In accordance with OSHA standards, supported scaffolds with a
height-to-base of more than ___ shall be restrained from tipping by
