Electrical craft helper study guide (New
2026/ 2027 Update) Questions & Answers
{Grade A} 100% Correct (Verified
Solutions)
When backing up a large vehicle, you should
A. use both mirrors
B. set cones to let you know you are at the right distance
C. get out of the vehicle and check for obstructions
D. have co-worker assist in backing you up - Correct answer D. Have co-worker assist
in backing you up
To make sure that a device remains de-energized during repairs and maintenance, you
should
A. tag the item out of service
B. lock the item out of service
C. lock out and tag out the device
D. notify everyone around not to use the device while you are working on ti - Correct
answer C. Lock out and tag out the device
,Apiece of electrical equipment has been turned of and there is a padlock with a "do not
remove" tag signed by the electrician. When can you remove the lock and turn the
equipment on?
A. it must be removed at the end of the day
B . it must be removed by whomever installed it
C. it can be removed when the equipment is needed
D. when your co-worker instructs you to remove it - Correct answer B. It must be
removed by whomever installed it
When using a 10-foot ladder, the highest working height is
A. 10feet
B. 9feet
C. 8feet
D. 7feet - Correct answer D. 7 feet
You are trying to get across a construction site and some red "do not enter" tape has
been put around an area you need to get through. When is it okay to cross the tape?
,A. when it wil save you several minutes
B. this is never okay
C. when you have a hard hat, safety glasses, and boots on
D. when your co-worker tells you ti is okay - Correct answer B. This is never okay
When should eye protection be worn?
A. when you are cutting any metal or wood
B. when you are working with hot metals
C. when a work condition may cause eye injury.
D. when you are working on a windy day - Correct answer C. When a work condition
may cause eye injury
When should you secure help in lifting an object?
A . when it is too heavy to lift by yourself
B . when the object is less than 25 pounds
C. always get help to lift any object
D. only when co-workers are available - Correct answer A. When it is too heavy to lift
by yourself
, You suspect a load in the back of the vehicle may shift during transit. You should
A. driveslowlysoasnottomovetheload B. inform your supervisor of the situation
C. secure the load with ropes and Straps
D. refuse to drive the vehicle - Correct answer C. Secure the load with ropes and
straps
The best way to check brake lights on a vehicle is to
A. apply brakes and check reflection
B . have co-worker check that lights are on when brake is applied
C. remove the lens cover and check the lamp filament
D. install a new lamp - Correct answer B. Have co-worker check that lights are on
when brake is applied
Walk-around inspection does not include which of the following?
A. check for dents
B. check for flat tires
C. check for materials on vehicle
2026/ 2027 Update) Questions & Answers
{Grade A} 100% Correct (Verified
Solutions)
When backing up a large vehicle, you should
A. use both mirrors
B. set cones to let you know you are at the right distance
C. get out of the vehicle and check for obstructions
D. have co-worker assist in backing you up - Correct answer D. Have co-worker assist
in backing you up
To make sure that a device remains de-energized during repairs and maintenance, you
should
A. tag the item out of service
B. lock the item out of service
C. lock out and tag out the device
D. notify everyone around not to use the device while you are working on ti - Correct
answer C. Lock out and tag out the device
,Apiece of electrical equipment has been turned of and there is a padlock with a "do not
remove" tag signed by the electrician. When can you remove the lock and turn the
equipment on?
A. it must be removed at the end of the day
B . it must be removed by whomever installed it
C. it can be removed when the equipment is needed
D. when your co-worker instructs you to remove it - Correct answer B. It must be
removed by whomever installed it
When using a 10-foot ladder, the highest working height is
A. 10feet
B. 9feet
C. 8feet
D. 7feet - Correct answer D. 7 feet
You are trying to get across a construction site and some red "do not enter" tape has
been put around an area you need to get through. When is it okay to cross the tape?
,A. when it wil save you several minutes
B. this is never okay
C. when you have a hard hat, safety glasses, and boots on
D. when your co-worker tells you ti is okay - Correct answer B. This is never okay
When should eye protection be worn?
A. when you are cutting any metal or wood
B. when you are working with hot metals
C. when a work condition may cause eye injury.
D. when you are working on a windy day - Correct answer C. When a work condition
may cause eye injury
When should you secure help in lifting an object?
A . when it is too heavy to lift by yourself
B . when the object is less than 25 pounds
C. always get help to lift any object
D. only when co-workers are available - Correct answer A. When it is too heavy to lift
by yourself
, You suspect a load in the back of the vehicle may shift during transit. You should
A. driveslowlysoasnottomovetheload B. inform your supervisor of the situation
C. secure the load with ropes and Straps
D. refuse to drive the vehicle - Correct answer C. Secure the load with ropes and
straps
The best way to check brake lights on a vehicle is to
A. apply brakes and check reflection
B . have co-worker check that lights are on when brake is applied
C. remove the lens cover and check the lamp filament
D. install a new lamp - Correct answer B. Have co-worker check that lights are on
when brake is applied
Walk-around inspection does not include which of the following?
A. check for dents
B. check for flat tires
C. check for materials on vehicle
