A-IPC EXAM ACTUAL TEST PAPER WITH FULL
SOLVED QUESTIONS AND CORRECT
ANSWERS GRADED A PLUS
◉ Class 1 Product. Answer: General Electronics Product - includes
products where the major requirement is function of the completed
assembly.
◉ Class 2 Product. Answer: Dedicated Service Electronic Product -
Continued performance and extended life required. Uninterrupted
service is desired but not required.
◉ Class 3 Product. Answer: High Performance Electrical Product -
Continued high performance or performance-on-demand is critical.
Equipment downtime cannot be tolerated. Equipment might be used
for life-support or other critical systems.
◉ Who as the ultimate responsibility for identifying the class to
which the assembly is evaluated?. Answer: The Customer.
◉ Shall. Answer: Invokes a requirement for manufacturers of all
classes or product, and failure to comply with the requirement is a
noncompliance to this standard.
, ◉ Order of Precedence in event of conflict 1. Answer: 1. Procurement
as agreed and documented between customer and supplier.
◉ Order of Precedence in event of conflict 2. Answer: Master
drawing or master ass. drawing reflecting the customer's detailed
requirements.
◉ Order of Precedence in event of conflict 3. Answer: IPC-1-610
when invoked by the customer or contract.
◉ If documents other than IPC-A-610 are cited, the order of
precedence shall be defined in the _. Answer: Procurement documents
◉ Target Condition. Answer: A condition that is close to perfect, but
is not always achievable and may not be necessary to ensure the
reliability of the assembly.
◉ Acceptable Condition. Answer: A condition that, while not
necessarily perfect, will maintain integrity and reliability of the
assembly
◉ Defect Condition. Answer: The form, fit or function of the
assembly is inadequate for use in its end use environment.
◉ A defect for Class 1.... Answer: automatically implies a defect for
Class 2 and 3. A defect for Class 2 implies a defect for Class 3.
SOLVED QUESTIONS AND CORRECT
ANSWERS GRADED A PLUS
◉ Class 1 Product. Answer: General Electronics Product - includes
products where the major requirement is function of the completed
assembly.
◉ Class 2 Product. Answer: Dedicated Service Electronic Product -
Continued performance and extended life required. Uninterrupted
service is desired but not required.
◉ Class 3 Product. Answer: High Performance Electrical Product -
Continued high performance or performance-on-demand is critical.
Equipment downtime cannot be tolerated. Equipment might be used
for life-support or other critical systems.
◉ Who as the ultimate responsibility for identifying the class to
which the assembly is evaluated?. Answer: The Customer.
◉ Shall. Answer: Invokes a requirement for manufacturers of all
classes or product, and failure to comply with the requirement is a
noncompliance to this standard.
, ◉ Order of Precedence in event of conflict 1. Answer: 1. Procurement
as agreed and documented between customer and supplier.
◉ Order of Precedence in event of conflict 2. Answer: Master
drawing or master ass. drawing reflecting the customer's detailed
requirements.
◉ Order of Precedence in event of conflict 3. Answer: IPC-1-610
when invoked by the customer or contract.
◉ If documents other than IPC-A-610 are cited, the order of
precedence shall be defined in the _. Answer: Procurement documents
◉ Target Condition. Answer: A condition that is close to perfect, but
is not always achievable and may not be necessary to ensure the
reliability of the assembly.
◉ Acceptable Condition. Answer: A condition that, while not
necessarily perfect, will maintain integrity and reliability of the
assembly
◉ Defect Condition. Answer: The form, fit or function of the
assembly is inadequate for use in its end use environment.
◉ A defect for Class 1.... Answer: automatically implies a defect for
Class 2 and 3. A defect for Class 2 implies a defect for Class 3.
