NICET Level 1 Fire Alarm Exam Questions With
Accurate Answers 2025\2026 A+ Grade
OSHA
- accurate answers-The Occupational Safety and Health Act (OSH Act) is the
primary federal law which governs occupational health and safety in the
private sector and federal government in the United States. Its main goal is to
ensure employers provide employees with an environment free from
recognized hazards, such as exposure to toxic chemicals, excessive noise
levels, mechanical dangers, heat or cold stress, or unsanitary conditions
OSHA 29 CFR, Part 1926.
- accurate answers-Ladders designed and built according to ANSI 14.1-5 meet
the requirements
The distance between the bottom of the ladder and the wall or support must
be approximately ___ the length of the ladder
- accurate answers-1/4
Wheel chocks shall be installed every time before an aerial lift is used true or
false?
- accurate answers-false
"Lockout/tagout" refers to specific
- accurate answers-practices and procedures to safeguard employees from the
unexpected energization or startup of machinery and equipment, or the
release of hazardous energy during service or maintenance activities.
Employers must establish a training and information program for employees
who are exposed to hazardous chemicals in their work area. How often must
this occur?
- accurate answers--at the time of initial assignment
-whenever a new hazard is introduced into their work area
what code requires fire extinguisher to be provided 3000 ft2 in a protected
building area
- accurate answers-OSHA 1926.150
, personal safety is whos responsibility?
- accurate answers-your responsibly
A respirator is a device which removes solid particles from the air such as
dust mold bacteria and pollen
- accurate answers-False
The MSDS or SDS sheets given the following information for a chemical
- accurate answers-Physical and chemical properties, physical and health
hazards, emergency and first aid procedures
Safety shoes for performing electrical work must be
- accurate answers-Nonconductive
Class K fires are fire that involve
- accurate answers-Cooking appliances that involve combustible cooking
media (vegetable oil, animals oils and fats)
When using a ladder for electrical work which is correct
- accurate answers-Rails must be non conductive
A ladder must be able to support what times the weight of the anticipated load
- accurate answers-3.3 times
When an employee may be exposed to hazardous chemicals when must
training take place
- accurate answers-When they might be subject to exposure and when new
chemicals are introduced to an employee work area
Protective gloves are worn when
- accurate answers-When working with metal stampings or 10 for the sharp
edges or splinters involved and when dealing with elevated temperatures of
materials and equipment
What type of fire extinguisher would you use for a fire when combustible
metals such as lithium or titanium
- accurate answers-Class D
Accurate Answers 2025\2026 A+ Grade
OSHA
- accurate answers-The Occupational Safety and Health Act (OSH Act) is the
primary federal law which governs occupational health and safety in the
private sector and federal government in the United States. Its main goal is to
ensure employers provide employees with an environment free from
recognized hazards, such as exposure to toxic chemicals, excessive noise
levels, mechanical dangers, heat or cold stress, or unsanitary conditions
OSHA 29 CFR, Part 1926.
- accurate answers-Ladders designed and built according to ANSI 14.1-5 meet
the requirements
The distance between the bottom of the ladder and the wall or support must
be approximately ___ the length of the ladder
- accurate answers-1/4
Wheel chocks shall be installed every time before an aerial lift is used true or
false?
- accurate answers-false
"Lockout/tagout" refers to specific
- accurate answers-practices and procedures to safeguard employees from the
unexpected energization or startup of machinery and equipment, or the
release of hazardous energy during service or maintenance activities.
Employers must establish a training and information program for employees
who are exposed to hazardous chemicals in their work area. How often must
this occur?
- accurate answers--at the time of initial assignment
-whenever a new hazard is introduced into their work area
what code requires fire extinguisher to be provided 3000 ft2 in a protected
building area
- accurate answers-OSHA 1926.150
, personal safety is whos responsibility?
- accurate answers-your responsibly
A respirator is a device which removes solid particles from the air such as
dust mold bacteria and pollen
- accurate answers-False
The MSDS or SDS sheets given the following information for a chemical
- accurate answers-Physical and chemical properties, physical and health
hazards, emergency and first aid procedures
Safety shoes for performing electrical work must be
- accurate answers-Nonconductive
Class K fires are fire that involve
- accurate answers-Cooking appliances that involve combustible cooking
media (vegetable oil, animals oils and fats)
When using a ladder for electrical work which is correct
- accurate answers-Rails must be non conductive
A ladder must be able to support what times the weight of the anticipated load
- accurate answers-3.3 times
When an employee may be exposed to hazardous chemicals when must
training take place
- accurate answers-When they might be subject to exposure and when new
chemicals are introduced to an employee work area
Protective gloves are worn when
- accurate answers-When working with metal stampings or 10 for the sharp
edges or splinters involved and when dealing with elevated temperatures of
materials and equipment
What type of fire extinguisher would you use for a fire when combustible
metals such as lithium or titanium
- accurate answers-Class D
