NEIEP 800 Final Review Exam Questions With
Accurate Solutions 2025\2026 A+ Grade.
The total weight of your elevator (force) is 8100 lbs. and its plunger area is 50
square inches. What is the system pressure?
- accurate answers-162 psi
Refer to the NEIEP Moving Walk Final Layout. What is the correct well way-to-
well way distance?
- accurate answers-134' 11"
Electrolysis is caused by which of the following?
- accurate answers-Stray current corrosion and Galvanic corrosion BOTH ARE
CORRECT
When using wire rope, the diameter of the sheaves must be how many times
the diameter of the suspension ropes?
- accurate answers-30
Wey-Delta starting is used for which of the following?
- accurate answers-Reduced current starting
You need the area of the plunger to calculate the pressure of the hydraulic
system. Your plunger is 8 inches in diameter. What is it's area?
- accurate answers-50.27 square inches
Which of the following provides mechanical interlocking of contactors?
- accurate answers-Interlock contacts
, As the certified welder on the job you must weld two cylinder pieces. How
must you join the two pieces?
- accurate answers-Tack welds then a fill bead
Once a plunger joint has been completed, what steps should be followed to
prevent damage to the packing?
- accurate answers-Sand with emery cloth
Under which of the following conditions will the buzzer (BZT) sound?
- accurate answers-When the handrail speed is 15% below step speed.
Refer to the NEIEP Escalator Final Layout diagram. What is the total distance
from the first floor finished floor height and the second floor finished floor
height?
- accurate answers-13' 6"
Refer to the NEIEP Escalator Final Layout diagram. What is the correct
measurement to align the truss in the center of the wellway?
- accurate answers-7' 6 1/2"
What is the function of the lower newel wheel on a moving walk with solid
balustrades?
- accurate answers-It acts as an idler
Which of the following will determine the leveling speed of an elevator?
- accurate answers-Rate of flow in gpm
Which of the following best describes the rack and pinion drive motor brake?
- accurate answers-It is spring set and electrically released
Accurate Solutions 2025\2026 A+ Grade.
The total weight of your elevator (force) is 8100 lbs. and its plunger area is 50
square inches. What is the system pressure?
- accurate answers-162 psi
Refer to the NEIEP Moving Walk Final Layout. What is the correct well way-to-
well way distance?
- accurate answers-134' 11"
Electrolysis is caused by which of the following?
- accurate answers-Stray current corrosion and Galvanic corrosion BOTH ARE
CORRECT
When using wire rope, the diameter of the sheaves must be how many times
the diameter of the suspension ropes?
- accurate answers-30
Wey-Delta starting is used for which of the following?
- accurate answers-Reduced current starting
You need the area of the plunger to calculate the pressure of the hydraulic
system. Your plunger is 8 inches in diameter. What is it's area?
- accurate answers-50.27 square inches
Which of the following provides mechanical interlocking of contactors?
- accurate answers-Interlock contacts
, As the certified welder on the job you must weld two cylinder pieces. How
must you join the two pieces?
- accurate answers-Tack welds then a fill bead
Once a plunger joint has been completed, what steps should be followed to
prevent damage to the packing?
- accurate answers-Sand with emery cloth
Under which of the following conditions will the buzzer (BZT) sound?
- accurate answers-When the handrail speed is 15% below step speed.
Refer to the NEIEP Escalator Final Layout diagram. What is the total distance
from the first floor finished floor height and the second floor finished floor
height?
- accurate answers-13' 6"
Refer to the NEIEP Escalator Final Layout diagram. What is the correct
measurement to align the truss in the center of the wellway?
- accurate answers-7' 6 1/2"
What is the function of the lower newel wheel on a moving walk with solid
balustrades?
- accurate answers-It acts as an idler
Which of the following will determine the leveling speed of an elevator?
- accurate answers-Rate of flow in gpm
Which of the following best describes the rack and pinion drive motor brake?
- accurate answers-It is spring set and electrically released
