COG170 TEST BANK 2026 FULLY SOLVED
QUESTIONS GUARANTEED TO PASS.
⩥ T/F The Dashboard Editor can be used to view the settings of any
dashboard in your system, but only custom‐built dashboards can be
modified. Epic‐released dashboards will be read‐ only. Answer: True
⩥ Basic Information. Answer: The Basic Information form records the
purpose, ownership, and general information of a dashboard.
⩥ Display title. Answer: End users see the display title in the Analytics
Catalog and when they view a dashboard.
⩥ Description. Answer: End users may read this description about the
dashboard in the Analytics Catalog.
⩥ Owning application. Answer: The application responsible for
maintaining this dashboard.
⩥ Layout. Answer: The Layout form controls the number and position of
regions that present the components in your dashboard.
,⩥ T/F End users cannot see your dashboard from the Analytics Catalog
until you select both the Ready for use and Enabled for user selection
checkboxes. Answer: True
⩥ There are seven types of component records available in Radar. They
are: Answer: -Graph
-Link
-Message Board
-Native HTML Report
-Listing Table
-Tranche ﴾This type is not currently used﴿
⩥ T/F For easier management of your component list, press F4 to insert
a blank line in your table
of components. To remove a line, select the line and press SHIFT+F4.
This tip works in many
other tables in Hyperspace.
To move a selected component higher or lower in the component list,
use the up and down
arrows to the right of the component. Answer: True
⩥ The Access form controls the set of users that can access this
dashboard and lists the dashboard's type﴾s﴿. This form also records
,whether the dashboard is ready for use. This check box must be selected
before any end user can use it. Answer: Access
⩥ This must be selected for any user, even the dashboard builder, to
open and view the dashboard. In addition, all components on a
dashboard must be marked as Ready for use before the dashboard can be
marked as Ready for use. Answer: Ready for use
⩥ Select this when you want the dashboard to be available in the
Analytics Catalog. Answer: Enabled for user
selection
⩥ T/F End users cannot see your dashboard from the Analytics Catalog
until you select both the Ready for use and Enabled for user selection
checkboxes. Answer: True
⩥ 1. Save your settings in the Dashboard Editor
The easiest way to save your settings is to navigate to another form in
the
Dashboard Editor.
Settings are also saved when you click Accept to close the Dashboard
Editor, but doing so means it will take longer to return to this record if
you
wish to make further edits.
, 2. Hard refresh your dashboard.
While viewing your dashboard, use the keyboard shortcut of ALT + =
﴾Mac
users: Option + Command + =﴿. Answer: To view a dashboard as you
are making changes to it, you will need to:
⩥ The Analytics Catalog can be used to find which of the following
reporting resource?a) Workbench reports, b) saved SlicerDicer sessions,
c) Radar dashboards, d) Dashboard components, e) Workbench
templates, f) Epic-Crystal reports. Answer: a) Workbench reports, c)
Radar dashboards, d)Dashboard components, f) Epic-Crystal reports
⩥ Assuming a user has the appropriate report group to access a
dashboard, what other dashboard settings control whether the dashboard
is available for viewing? Answer: Appropriate Report Group; The
Ready for use and Enabled for user selection check boxes
⩥ Every Report model is a record in which Master File? Answer: HSQ
⩥ Which of the following do you need to create a link from a dashboard
to a given Hyperspaceactivity?
a. The activity descriptor for the activity
b. The menu descriptor of the activity
c. The user-facing name of the activity
QUESTIONS GUARANTEED TO PASS.
⩥ T/F The Dashboard Editor can be used to view the settings of any
dashboard in your system, but only custom‐built dashboards can be
modified. Epic‐released dashboards will be read‐ only. Answer: True
⩥ Basic Information. Answer: The Basic Information form records the
purpose, ownership, and general information of a dashboard.
⩥ Display title. Answer: End users see the display title in the Analytics
Catalog and when they view a dashboard.
⩥ Description. Answer: End users may read this description about the
dashboard in the Analytics Catalog.
⩥ Owning application. Answer: The application responsible for
maintaining this dashboard.
⩥ Layout. Answer: The Layout form controls the number and position of
regions that present the components in your dashboard.
,⩥ T/F End users cannot see your dashboard from the Analytics Catalog
until you select both the Ready for use and Enabled for user selection
checkboxes. Answer: True
⩥ There are seven types of component records available in Radar. They
are: Answer: -Graph
-Link
-Message Board
-Native HTML Report
-Listing Table
-Tranche ﴾This type is not currently used﴿
⩥ T/F For easier management of your component list, press F4 to insert
a blank line in your table
of components. To remove a line, select the line and press SHIFT+F4.
This tip works in many
other tables in Hyperspace.
To move a selected component higher or lower in the component list,
use the up and down
arrows to the right of the component. Answer: True
⩥ The Access form controls the set of users that can access this
dashboard and lists the dashboard's type﴾s﴿. This form also records
,whether the dashboard is ready for use. This check box must be selected
before any end user can use it. Answer: Access
⩥ This must be selected for any user, even the dashboard builder, to
open and view the dashboard. In addition, all components on a
dashboard must be marked as Ready for use before the dashboard can be
marked as Ready for use. Answer: Ready for use
⩥ Select this when you want the dashboard to be available in the
Analytics Catalog. Answer: Enabled for user
selection
⩥ T/F End users cannot see your dashboard from the Analytics Catalog
until you select both the Ready for use and Enabled for user selection
checkboxes. Answer: True
⩥ 1. Save your settings in the Dashboard Editor
The easiest way to save your settings is to navigate to another form in
the
Dashboard Editor.
Settings are also saved when you click Accept to close the Dashboard
Editor, but doing so means it will take longer to return to this record if
you
wish to make further edits.
, 2. Hard refresh your dashboard.
While viewing your dashboard, use the keyboard shortcut of ALT + =
﴾Mac
users: Option + Command + =﴿. Answer: To view a dashboard as you
are making changes to it, you will need to:
⩥ The Analytics Catalog can be used to find which of the following
reporting resource?a) Workbench reports, b) saved SlicerDicer sessions,
c) Radar dashboards, d) Dashboard components, e) Workbench
templates, f) Epic-Crystal reports. Answer: a) Workbench reports, c)
Radar dashboards, d)Dashboard components, f) Epic-Crystal reports
⩥ Assuming a user has the appropriate report group to access a
dashboard, what other dashboard settings control whether the dashboard
is available for viewing? Answer: Appropriate Report Group; The
Ready for use and Enabled for user selection check boxes
⩥ Every Report model is a record in which Master File? Answer: HSQ
⩥ Which of the following do you need to create a link from a dashboard
to a given Hyperspaceactivity?
a. The activity descriptor for the activity
b. The menu descriptor of the activity
c. The user-facing name of the activity
