IMSEP 4+ Questions with 100% Verified
Correct Answers
In annealing, the workpiece needs to be heated to _______________.
(A) upper critical temperature (B) lower critical temperature
A
In normalizing, the workpiece needs to be heated to above _______________.
(A) upper critical temperature. (B) lower critical temperature
a
In tempering, the workpiece needs to be heated to below _______________.
(A) upper critical temperature (B) lower critical temperature
b
Typically, the hardness of the material is _____________ after normalizing.
(A) increased (B) decreased
b
Typically, the hardness of the material is _____________ after tempering.
(A) increased (B) decreased
b
Normalizing gives ___________________ steel than full annealing.
(A) stronger and more brittle (B) weaker and more ductile
(C) stronger and more ductile (D) weaker and more brittle
a
Correct Answers
In annealing, the workpiece needs to be heated to _______________.
(A) upper critical temperature (B) lower critical temperature
A
In normalizing, the workpiece needs to be heated to above _______________.
(A) upper critical temperature. (B) lower critical temperature
a
In tempering, the workpiece needs to be heated to below _______________.
(A) upper critical temperature (B) lower critical temperature
b
Typically, the hardness of the material is _____________ after normalizing.
(A) increased (B) decreased
b
Typically, the hardness of the material is _____________ after tempering.
(A) increased (B) decreased
b
Normalizing gives ___________________ steel than full annealing.
(A) stronger and more brittle (B) weaker and more ductile
(C) stronger and more ductile (D) weaker and more brittle
a
