IRONWORKER NCCER EXAM Questions & Answers | With 100% Correct
Answers graded A+ (updated 2026) Guaranteed Success!!
1. The area on the wall where a door can be placed doorway
is more properly known as the
2. the purpose of a door closer is to control the speed at which the
door opens and closes
3. How does a door help to control the physical at- By enclosing an area so that the
mosphere of a space interior may be more effectively
heated or cooled
4. The most common doors installed by Ironworkers Both A and B
are _____________.
5. The door swing, or handing, is always determined Side of the door you used the key
from the _________________. on
6. If the hinges are on the left and door opens in its left hand door
a
7. if the hinges are on the right and the door opens right hand reverse door
out its a
8. An exterior sliding door usually has ______________ a movable and a fixed panel
9. A revolving door consists of three or four doors leaves
called ________________.
10. A _____________ keeps people from spinning a re- governor
volving door too fast.
11. Service doors roll upward and are stored on a coil above the opening
____________.
, IRONWORKER NCCER EXAM Questions & Answers | With 100% Correct
Answers graded A+ (updated 2026) Guaranteed Success!!
12. Modular reinforced panels used in modern concrete and additivies
bank vaults are made using a special blend of
________________.
13. The first step in installing a modern bank vault is Become familiar with the man-
to ________________. ufactures drawings and instruc-
tions
14. Which of the following is a common type of Vertical lift
hangar door that Ironworkers install?
15. Which of the following is a type of hangar door Bi-fold
most likely to be used with smaller hangars and
buildings?
16. Which of the following types of hangar doors pro- Single panel
vides a canopy when the doors is in the open
position
17. Which of the following types of hangar doors is Rolling
most likely to be used when a large or even su-
per-wide door is needed?
18. Which of the following types of hangar doors Vertical lift
includes intermediate, horizontal aluminum sec-
tions fitted between fabrics?
19. Thin vault panels made from new materials avail- True
able today are far stronger than the thicker
poured concrete walls. True /False
20. False
, IRONWORKER NCCER EXAM Questions & Answers | With 100% Correct
Answers graded A+ (updated 2026) Guaranteed Success!!
The skills needed to install hangar doors are signif-
icantly different from the skills required to install
the swing, sliding and revolving doors. True/False
21. For Ironworkers, the term " layout " includes es- True
tablishing control lines and benchmarks. TRUE
OR False
22. Surveying uses the techniques of ______________. geometry and trigonometry
23. Historically, distances were measured ____________ Through the use of chains with
links known as length
24. The ancient use of a compass to measure horizon- False
tal angles has not been improved upon. TRUE or
False
25. Early surveyors learned that the simplest method barometer
to measure height was with an altimeter. The al-
timeter they used was basically a ______________.
26. Theodolites have been used to measure angles 1571
since ___________.
27. A transit is a type of ______________. theodolite
28. Distance is defined as the amount of _________ space
between two things
29. A horizontal measure is referred to as length or width
_______
30. True
Answers graded A+ (updated 2026) Guaranteed Success!!
1. The area on the wall where a door can be placed doorway
is more properly known as the
2. the purpose of a door closer is to control the speed at which the
door opens and closes
3. How does a door help to control the physical at- By enclosing an area so that the
mosphere of a space interior may be more effectively
heated or cooled
4. The most common doors installed by Ironworkers Both A and B
are _____________.
5. The door swing, or handing, is always determined Side of the door you used the key
from the _________________. on
6. If the hinges are on the left and door opens in its left hand door
a
7. if the hinges are on the right and the door opens right hand reverse door
out its a
8. An exterior sliding door usually has ______________ a movable and a fixed panel
9. A revolving door consists of three or four doors leaves
called ________________.
10. A _____________ keeps people from spinning a re- governor
volving door too fast.
11. Service doors roll upward and are stored on a coil above the opening
____________.
, IRONWORKER NCCER EXAM Questions & Answers | With 100% Correct
Answers graded A+ (updated 2026) Guaranteed Success!!
12. Modular reinforced panels used in modern concrete and additivies
bank vaults are made using a special blend of
________________.
13. The first step in installing a modern bank vault is Become familiar with the man-
to ________________. ufactures drawings and instruc-
tions
14. Which of the following is a common type of Vertical lift
hangar door that Ironworkers install?
15. Which of the following is a type of hangar door Bi-fold
most likely to be used with smaller hangars and
buildings?
16. Which of the following types of hangar doors pro- Single panel
vides a canopy when the doors is in the open
position
17. Which of the following types of hangar doors is Rolling
most likely to be used when a large or even su-
per-wide door is needed?
18. Which of the following types of hangar doors Vertical lift
includes intermediate, horizontal aluminum sec-
tions fitted between fabrics?
19. Thin vault panels made from new materials avail- True
able today are far stronger than the thicker
poured concrete walls. True /False
20. False
, IRONWORKER NCCER EXAM Questions & Answers | With 100% Correct
Answers graded A+ (updated 2026) Guaranteed Success!!
The skills needed to install hangar doors are signif-
icantly different from the skills required to install
the swing, sliding and revolving doors. True/False
21. For Ironworkers, the term " layout " includes es- True
tablishing control lines and benchmarks. TRUE
OR False
22. Surveying uses the techniques of ______________. geometry and trigonometry
23. Historically, distances were measured ____________ Through the use of chains with
links known as length
24. The ancient use of a compass to measure horizon- False
tal angles has not been improved upon. TRUE or
False
25. Early surveyors learned that the simplest method barometer
to measure height was with an altimeter. The al-
timeter they used was basically a ______________.
26. Theodolites have been used to measure angles 1571
since ___________.
27. A transit is a type of ______________. theodolite
28. Distance is defined as the amount of _________ space
between two things
29. A horizontal measure is referred to as length or width
_______
30. True
