Page 1 of 149
BC Gasfitter Class A Certification Exam QUESTIONS
AND CORRECT ANSWERS WITH RATIONALES
BC Gasfitter Class A Certification Exam Practice Questions
10 MOST-TESTED COVERAGE AREAS
1. Safety Standards Act — Application and Administrative Responsibility
2. Safety Standards Act — Certification, Regulated Products, and Certification Marks
3. Safety Standards Act — Safety Officers, Safety Managers, and Their Duties
4. Safety Standards Act — Contractors, Certificates, Permissions, Enforcement, and Appeals
5. Safety Standards General Regulation — Qualifications and Contractor Licensing
6. Safety Standards General Regulation — Permits, Inspections, Documents, and Reporting
7. Gas Safety Regulation — Definitions, Scope, Qualifications, Licensing, and Permit Duties
8. Gas Safety Regulation — Gas Equipment, Installation, Repair, Inspection, and Technical
Requirements
9. Gas Safety Regulation — Existing Gas Systems, Information Requests, and BC Code Variations
10. Directives, Information Bulletins, Safety Orders, and BC-Specific Regulatory Instructions
1.
A Class A gasfitter wants to perform regulated gas work in British Columbia. Which document normally
establishes the person's qualification to perform the work?
A. A municipal business licence
B. A certificate of qualification
C. A building occupancy permit
D. A manufacturer's warranty
Answer: B
, Page 2 of 149
Rationale: A certificate of qualification establishes the required trade qualification for regulated work.
2.
Under the current Technical Safety BC process, what is the minimum passing grade for the Class A
Gasfitter ARD examination?
A. 50%
B. 60%
C. 70%
D. 80%
Answer: C
Rationale: Technical Safety BC states that successful completion requires a score of 70% or higher.
(Technical Safety BC)
3.
A contractor plans regulated gas work but has not obtained the required permit. What should the
contractor do before starting that regulated work?
, Page 3 of 149
A. Start work and apply later
B. Obtain the required permit first
C. Ask the customer to approve the work
D. Have another worker sign the invoice
Answer: B
Rationale: Regulated gas work requiring a permit should not begin until the required authorization is
obtained.
4.
Which organization is responsible for the provincial safety certification process for Class A gasfitters in
British Columbia?
A. Technical Safety BC
B. Canada Revenue Agency
C. WorkSafeBC only
D. BC Hydro only
Answer: A
, Page 4 of 149
Rationale: Technical Safety BC administers the provincial gas safety certification process. (Technical
Safety BC)
5.
A regulated gas appliance does not have the required approval or certification mark. What is the main
regulatory concern?
A. The appliance may not be an approved regulated product
B. The appliance is automatically more efficient
C. The appliance requires no inspection
D. The appliance becomes permanently exempt
Answer: A
Rationale: Product approval and certification are specifically addressed by the Safety Standards Act and
Gas Safety Regulation.
6.
Which subject carries the largest percentage of the current Class A Gasfitter ARD examination?
BC Gasfitter Class A Certification Exam QUESTIONS
AND CORRECT ANSWERS WITH RATIONALES
BC Gasfitter Class A Certification Exam Practice Questions
10 MOST-TESTED COVERAGE AREAS
1. Safety Standards Act — Application and Administrative Responsibility
2. Safety Standards Act — Certification, Regulated Products, and Certification Marks
3. Safety Standards Act — Safety Officers, Safety Managers, and Their Duties
4. Safety Standards Act — Contractors, Certificates, Permissions, Enforcement, and Appeals
5. Safety Standards General Regulation — Qualifications and Contractor Licensing
6. Safety Standards General Regulation — Permits, Inspections, Documents, and Reporting
7. Gas Safety Regulation — Definitions, Scope, Qualifications, Licensing, and Permit Duties
8. Gas Safety Regulation — Gas Equipment, Installation, Repair, Inspection, and Technical
Requirements
9. Gas Safety Regulation — Existing Gas Systems, Information Requests, and BC Code Variations
10. Directives, Information Bulletins, Safety Orders, and BC-Specific Regulatory Instructions
1.
A Class A gasfitter wants to perform regulated gas work in British Columbia. Which document normally
establishes the person's qualification to perform the work?
A. A municipal business licence
B. A certificate of qualification
C. A building occupancy permit
D. A manufacturer's warranty
Answer: B
, Page 2 of 149
Rationale: A certificate of qualification establishes the required trade qualification for regulated work.
2.
Under the current Technical Safety BC process, what is the minimum passing grade for the Class A
Gasfitter ARD examination?
A. 50%
B. 60%
C. 70%
D. 80%
Answer: C
Rationale: Technical Safety BC states that successful completion requires a score of 70% or higher.
(Technical Safety BC)
3.
A contractor plans regulated gas work but has not obtained the required permit. What should the
contractor do before starting that regulated work?
, Page 3 of 149
A. Start work and apply later
B. Obtain the required permit first
C. Ask the customer to approve the work
D. Have another worker sign the invoice
Answer: B
Rationale: Regulated gas work requiring a permit should not begin until the required authorization is
obtained.
4.
Which organization is responsible for the provincial safety certification process for Class A gasfitters in
British Columbia?
A. Technical Safety BC
B. Canada Revenue Agency
C. WorkSafeBC only
D. BC Hydro only
Answer: A
, Page 4 of 149
Rationale: Technical Safety BC administers the provincial gas safety certification process. (Technical
Safety BC)
5.
A regulated gas appliance does not have the required approval or certification mark. What is the main
regulatory concern?
A. The appliance may not be an approved regulated product
B. The appliance is automatically more efficient
C. The appliance requires no inspection
D. The appliance becomes permanently exempt
Answer: A
Rationale: Product approval and certification are specifically addressed by the Safety Standards Act and
Gas Safety Regulation.
6.
Which subject carries the largest percentage of the current Class A Gasfitter ARD examination?
