EPA LEAD RISK ASSESSOR CERTIFICATIO 3 UPDATED ACTUAL EXAM QUESTIONS
CORRECT ANSWERS GRADED A PLUS
Question:
Lead Inspection
Answer:
Which is more useful for the renovation contractor, the lead inspection or the risk assessment?
Question:
Visual Dust Soil Paint Chip XRF Water
Answer:
What six sampling methods do Risk Assessors use to identify lead hazards?
Question:
Notify the client in writing
Answer:
A certified Risk Assessor may conduct a Risk assessment on a property which is to be abated by the
firm for which they work, if they.
Question:
30 ug/m3
Answer:
What is the OSHA Action Level for lead?
Question:
Optional
,Answer:
Water sampling as part of a Risk Assessment is: Mandatory, Optional, or Never included?
Question:
Dust Friction Surface Impact Surface Chewable Surface Deteriorated Paint Soil
Answer:
What are the six LBP hazards defined by EPA?
Question:
1,200 ppm
Answer:
EPA Soil lead hazard in general yard area
Question:
True
Answer:
XRF analysis is the most common method for determining LBP
Question:
False, XRF is most commonly used to determine LBP but not hazards
Answer:
XRF analysis is the most common method for determining lead hazards
Question:
Performance Characteristic Sheet (PCS) supplied with the XRF
Answer:
, Where would you find operational data for an XRF?
Question:
13
Answer:
How many dust samples are usually taken for a Risk Assessment?
Question:
Removal Enclosure Encapsulation
Answer:
What are the three forms of lead abatement?
Question:
3 shots on the 1.02 standard
Answer:
How do you calibrate an XRF?
Question:
Beginning End Every 4 hours Every time the device is powered down
Answer:
How often do you calibrate an XRF?
Question:
Equal to or greater than 1.0 mg/cm2
Answer:
LBP per XRF
CORRECT ANSWERS GRADED A PLUS
Question:
Lead Inspection
Answer:
Which is more useful for the renovation contractor, the lead inspection or the risk assessment?
Question:
Visual Dust Soil Paint Chip XRF Water
Answer:
What six sampling methods do Risk Assessors use to identify lead hazards?
Question:
Notify the client in writing
Answer:
A certified Risk Assessor may conduct a Risk assessment on a property which is to be abated by the
firm for which they work, if they.
Question:
30 ug/m3
Answer:
What is the OSHA Action Level for lead?
Question:
Optional
,Answer:
Water sampling as part of a Risk Assessment is: Mandatory, Optional, or Never included?
Question:
Dust Friction Surface Impact Surface Chewable Surface Deteriorated Paint Soil
Answer:
What are the six LBP hazards defined by EPA?
Question:
1,200 ppm
Answer:
EPA Soil lead hazard in general yard area
Question:
True
Answer:
XRF analysis is the most common method for determining LBP
Question:
False, XRF is most commonly used to determine LBP but not hazards
Answer:
XRF analysis is the most common method for determining lead hazards
Question:
Performance Characteristic Sheet (PCS) supplied with the XRF
Answer:
, Where would you find operational data for an XRF?
Question:
13
Answer:
How many dust samples are usually taken for a Risk Assessment?
Question:
Removal Enclosure Encapsulation
Answer:
What are the three forms of lead abatement?
Question:
3 shots on the 1.02 standard
Answer:
How do you calibrate an XRF?
Question:
Beginning End Every 4 hours Every time the device is powered down
Answer:
How often do you calibrate an XRF?
Question:
Equal to or greater than 1.0 mg/cm2
Answer:
LBP per XRF
