MSSC 4.0 Quality Practices and
Measurement Complete Exam
Study Questions with Verified
Answers
1. What are edge devices?
- Sensors and machines that produce data
- Cloud storage units
- Fog computing nodes
- Big data storage repositories - ANSWER Sensors and machines that
produce data
2. Which pillar of Lean Manufacturing is most affected by using IIoT across
the supply chain for better control and tracking of production and delivery?-
Just-in-Time- Jidoka- Total Productive Maintenance- 5S - ANSWER Just-
in-Time
3. The ability to sort products by type by scanning a barcode is an advantage of
using a(n) __________.- Audit checklist- Barcode reading system-
Coordinate measuring machine- Electronic sensors - ANSWER Barcode
reading system
4. In manufacturing, predictive maintenance, automated quality testing, and
product design programs use __________ to make improvements.
- Office tools
- Electronic sensors
- Data analytics
- Flow charts - ANSWER Data analytics
,5. To reduce variation, minimize defects, and to shorten cycle time are
considered __________ goals - ANSWER quality
6. Kaizen, Kanban, and 5S are just a few of many elements used in a(n)
__________ operation. - ANSWER Just In Time (JIT)
7. Eliminating quality variances will result in __________. - ANSWER
Improved process quality
8. The number of defects produced is a measure of __________. - ANSWER
The effectiveness of a quality assurance system
9. The purpose of ISO 9000 is to help companies __________. - ANSWER
Improve quality
10.Companies often __________ to create a baseline measurement for
improvements in machine performance. - ANSWER Establish a metric
11.Product development teams should perform a(n) __________ as early as
possible during their design process. - ANSWER Design Failure Mode and
Effects Analysis
12.An employee should report to their supervisor if the following situation
occurs: - ANSWER There is an increase in the number of defective parts
produced by a machine
,13.Joseph M. Juran, W. Edwards Deming, and C. Phillip Crosby contributed to
the various approaches of __________. - ANSWER TQM, Total Quality
Management
14.First piece inspection is required for __________. - ANSWER
Documenting repeatable setups
15.The quality management system that dedicates a full time team to solving
problems is called a __________ QMS. - ANSWER Six Sigma
16.Spreadsheets are used to perform calculations in __________ and produce
graphs. - ANSWER Rows and columns
17.Advantages of implementing __________ include reduced production costs,
rapid decision making, and expanded operation capabilities.
- Motivational speaking
- Artificial intelligence
- Data collection
- Artificial analysis - ANSWER Artificial intelligence
18.A dirty lens is the most likely cause of a(n) __________.
- Barcode programming error
- Bright flashlight
- Barcode scanning failure
- Bad cmm measurement - ANSWER Barcode scanning failure
19.Interconnected sensors, various instruments, and computers are used in
__________.
- Scientific advancement (SA)
- Industrial internet of things (IIOT)
- Failure mode and effects analysis (FMEA)
- Quality audits (QA) - ANSWER Industrial internet of things
, 20.Barcodes, RFID, NFC, and machine vision are all examples of what type of
technology?
- Artificial intelligence
- Machine learning
- Edge and fog computing
- Automatic Identification and Data Collection - ANSWER Automatic
Identification and Data Collection
21.In data analytics, the data must be __________ before being modeled and
analyzed.
- Invented and inspected
- Inspected and cleansed
- Revised and input
- Calculated and sorted - ANSWER Inspected and cleansed
22.The Industrial Internet of Things (IIOT) enables a company to collect data to
improve __________ in various processes.- Precision, quality, speed, and
reliability- Teamwork- Operator dependability- Cleanliness and output -
ANSWER Precision, quality, speed, and reliability
23.Artificial Intelligence is the development of computer systems to be able to
perform tasks that would normally require __________.
- Computer intelligence
- Human development
- Human intelligence
- Augmented intelligence - ANSWER Human intelligence
24.What data can some smart sensors communicate so they can be adjusted or
replaced before they fail?
- Data about their own health
- Data about the proximity of nearby objects
- Data about the amount of water vapor in the atmosphere
Measurement Complete Exam
Study Questions with Verified
Answers
1. What are edge devices?
- Sensors and machines that produce data
- Cloud storage units
- Fog computing nodes
- Big data storage repositories - ANSWER Sensors and machines that
produce data
2. Which pillar of Lean Manufacturing is most affected by using IIoT across
the supply chain for better control and tracking of production and delivery?-
Just-in-Time- Jidoka- Total Productive Maintenance- 5S - ANSWER Just-
in-Time
3. The ability to sort products by type by scanning a barcode is an advantage of
using a(n) __________.- Audit checklist- Barcode reading system-
Coordinate measuring machine- Electronic sensors - ANSWER Barcode
reading system
4. In manufacturing, predictive maintenance, automated quality testing, and
product design programs use __________ to make improvements.
- Office tools
- Electronic sensors
- Data analytics
- Flow charts - ANSWER Data analytics
,5. To reduce variation, minimize defects, and to shorten cycle time are
considered __________ goals - ANSWER quality
6. Kaizen, Kanban, and 5S are just a few of many elements used in a(n)
__________ operation. - ANSWER Just In Time (JIT)
7. Eliminating quality variances will result in __________. - ANSWER
Improved process quality
8. The number of defects produced is a measure of __________. - ANSWER
The effectiveness of a quality assurance system
9. The purpose of ISO 9000 is to help companies __________. - ANSWER
Improve quality
10.Companies often __________ to create a baseline measurement for
improvements in machine performance. - ANSWER Establish a metric
11.Product development teams should perform a(n) __________ as early as
possible during their design process. - ANSWER Design Failure Mode and
Effects Analysis
12.An employee should report to their supervisor if the following situation
occurs: - ANSWER There is an increase in the number of defective parts
produced by a machine
,13.Joseph M. Juran, W. Edwards Deming, and C. Phillip Crosby contributed to
the various approaches of __________. - ANSWER TQM, Total Quality
Management
14.First piece inspection is required for __________. - ANSWER
Documenting repeatable setups
15.The quality management system that dedicates a full time team to solving
problems is called a __________ QMS. - ANSWER Six Sigma
16.Spreadsheets are used to perform calculations in __________ and produce
graphs. - ANSWER Rows and columns
17.Advantages of implementing __________ include reduced production costs,
rapid decision making, and expanded operation capabilities.
- Motivational speaking
- Artificial intelligence
- Data collection
- Artificial analysis - ANSWER Artificial intelligence
18.A dirty lens is the most likely cause of a(n) __________.
- Barcode programming error
- Bright flashlight
- Barcode scanning failure
- Bad cmm measurement - ANSWER Barcode scanning failure
19.Interconnected sensors, various instruments, and computers are used in
__________.
- Scientific advancement (SA)
- Industrial internet of things (IIOT)
- Failure mode and effects analysis (FMEA)
- Quality audits (QA) - ANSWER Industrial internet of things
, 20.Barcodes, RFID, NFC, and machine vision are all examples of what type of
technology?
- Artificial intelligence
- Machine learning
- Edge and fog computing
- Automatic Identification and Data Collection - ANSWER Automatic
Identification and Data Collection
21.In data analytics, the data must be __________ before being modeled and
analyzed.
- Invented and inspected
- Inspected and cleansed
- Revised and input
- Calculated and sorted - ANSWER Inspected and cleansed
22.The Industrial Internet of Things (IIOT) enables a company to collect data to
improve __________ in various processes.- Precision, quality, speed, and
reliability- Teamwork- Operator dependability- Cleanliness and output -
ANSWER Precision, quality, speed, and reliability
23.Artificial Intelligence is the development of computer systems to be able to
perform tasks that would normally require __________.
- Computer intelligence
- Human development
- Human intelligence
- Augmented intelligence - ANSWER Human intelligence
24.What data can some smart sensors communicate so they can be adjusted or
replaced before they fail?
- Data about their own health
- Data about the proximity of nearby objects
- Data about the amount of water vapor in the atmosphere
