___________________________________________________________________
Georgia Signalperson Qualification
Examination Advanced Practice Exam
2026 | 100 Questions & Answers with
Detailed Rationales | Complete Exam
Prep & Study Guide
1. What is the primary responsibility of a qualified signalperson during crane
operations?
A. Determine the crane's rated capacity
B. Direct crane movement using recognized signals and maintain
communication with the operator
C. Perform all rigging inspections
D. Approve the lift plan
Answer: Direct crane movement using recognized signals and maintain
communication with the operator
Rationale: A signalperson's core function is to communicate clear, standardized
signals to the operator and help ensure movements are performed safely.
2. When should a signalperson give a stop signal?
A. Only when the load reaches the destination
B. Only when directed by the supervisor
C. Whenever an unsafe condition or unexpected movement requires the
operation to stop
D. Only during an emergency
,Answer: Whenever an unsafe condition or unexpected movement requires the
operation to stop
Rationale: A stop signal must be given whenever continuing the operation could
create danger.
3. What should the crane operator do if communication with the signalperson
is lost?
A. Continue at reduced speed
B. Continue until another signalperson arrives
C. Stop crane movement until communication is restored
D. Lower the load automatically
Answer: Stop crane movement until communication is restored
Rationale: Loss of communication can result in uncontrolled movement, so crane
operations should stop until effective communication is reestablished.
4. Which characteristic is most important when selecting a signalperson?
A. Physical strength
B. Ability to communicate clearly and understand crane operations
C. Seniority with the employer
D. Ability to operate heavy equipment
Answer: Ability to communicate clearly and understand crane operations
Rationale: Signalpersons must understand the signals, hazards, and equipment
movements well enough to direct the operator safely.
5. A standard hand signal is being given while the operator cannot clearly see
the signalperson. What should happen?
A. The signalperson should continue signaling
B. The operator should guess the intended movement
C. The signalperson should reposition to a visible location or use another
effective communication method
D. The operator should increase speed
Answer: The signalperson should reposition to a visible location or use another
effective communication method
,Rationale: Signals are effective only when the operator can reliably receive and
interpret them.
6. What does the standard hand signal for "hoist" generally require the
signalperson to do?
A. Move the forearm downward repeatedly
B. Extend the arm horizontally and move the hand upward
C. Point downward and rotate the wrist
D. Cross both arms
Answer: Extend the arm upward with the hand making the recognized hoist
signal
Rationale: The standard hoist signal communicates upward movement of the
load and must be clearly distinguishable to the operator.
7. What is the purpose of the "stop" hand signal?
A. To slow the load slightly
B. To stop the specific crane function or movement being directed
C. To lower the load
D. To release the rigging
Answer: To stop the specific crane function or movement being directed
Rationale: Stop signals are used to halt crane movement and prevent an unsafe
continuation of the operation.
8. If a signalperson observes a person walking underneath a suspended load,
what is the appropriate response?
A. Continue the lift slowly
B. Signal the operator to stop
C. Tell the worker to move after the load passes
D. Increase the load speed
Answer: Signal the operator to stop
Rationale: Personnel should not be exposed to suspended-load hazards.
Stopping the movement allows the hazard to be corrected.
, 9. Which communication method is generally preferred when using hand
signals?
A. Random gestures
B. Standardized signals recognized by the operator
C. Verbal descriptions only
D. Signals created during the lift
Answer: Standardized signals recognized by the operator
Rationale: Standardized signals reduce ambiguity and allow the operator and
signalperson to communicate consistently.
10.Who should establish the communication method before a lift begins?
A. The signalperson alone
B. The operator alone
C. The operator and signalperson as part of the lift planning process
D. Any nearby worker
Answer: The operator and signalperson as part of the lift planning process
Rationale: Both parties need to understand the communication method before
movement starts.
11.A signalperson needs to direct a load toward the east, but the operator is
facing north. What is the best practice?
A. Use the signalperson's personal left and right without explanation
B. Establish the directional convention before the lift
C. Use only verbal signals
D. Allow the operator to determine the direction
Answer: Establish the directional convention before the lift
Rationale: Directional signals must be understood consistently to prevent
unintended crane movement.
12.What should a signalperson do if two people are simultaneously giving
conflicting signals to the operator?
A. Continue signaling normally
B. Allow the operator to choose
Georgia Signalperson Qualification
Examination Advanced Practice Exam
2026 | 100 Questions & Answers with
Detailed Rationales | Complete Exam
Prep & Study Guide
1. What is the primary responsibility of a qualified signalperson during crane
operations?
A. Determine the crane's rated capacity
B. Direct crane movement using recognized signals and maintain
communication with the operator
C. Perform all rigging inspections
D. Approve the lift plan
Answer: Direct crane movement using recognized signals and maintain
communication with the operator
Rationale: A signalperson's core function is to communicate clear, standardized
signals to the operator and help ensure movements are performed safely.
2. When should a signalperson give a stop signal?
A. Only when the load reaches the destination
B. Only when directed by the supervisor
C. Whenever an unsafe condition or unexpected movement requires the
operation to stop
D. Only during an emergency
,Answer: Whenever an unsafe condition or unexpected movement requires the
operation to stop
Rationale: A stop signal must be given whenever continuing the operation could
create danger.
3. What should the crane operator do if communication with the signalperson
is lost?
A. Continue at reduced speed
B. Continue until another signalperson arrives
C. Stop crane movement until communication is restored
D. Lower the load automatically
Answer: Stop crane movement until communication is restored
Rationale: Loss of communication can result in uncontrolled movement, so crane
operations should stop until effective communication is reestablished.
4. Which characteristic is most important when selecting a signalperson?
A. Physical strength
B. Ability to communicate clearly and understand crane operations
C. Seniority with the employer
D. Ability to operate heavy equipment
Answer: Ability to communicate clearly and understand crane operations
Rationale: Signalpersons must understand the signals, hazards, and equipment
movements well enough to direct the operator safely.
5. A standard hand signal is being given while the operator cannot clearly see
the signalperson. What should happen?
A. The signalperson should continue signaling
B. The operator should guess the intended movement
C. The signalperson should reposition to a visible location or use another
effective communication method
D. The operator should increase speed
Answer: The signalperson should reposition to a visible location or use another
effective communication method
,Rationale: Signals are effective only when the operator can reliably receive and
interpret them.
6. What does the standard hand signal for "hoist" generally require the
signalperson to do?
A. Move the forearm downward repeatedly
B. Extend the arm horizontally and move the hand upward
C. Point downward and rotate the wrist
D. Cross both arms
Answer: Extend the arm upward with the hand making the recognized hoist
signal
Rationale: The standard hoist signal communicates upward movement of the
load and must be clearly distinguishable to the operator.
7. What is the purpose of the "stop" hand signal?
A. To slow the load slightly
B. To stop the specific crane function or movement being directed
C. To lower the load
D. To release the rigging
Answer: To stop the specific crane function or movement being directed
Rationale: Stop signals are used to halt crane movement and prevent an unsafe
continuation of the operation.
8. If a signalperson observes a person walking underneath a suspended load,
what is the appropriate response?
A. Continue the lift slowly
B. Signal the operator to stop
C. Tell the worker to move after the load passes
D. Increase the load speed
Answer: Signal the operator to stop
Rationale: Personnel should not be exposed to suspended-load hazards.
Stopping the movement allows the hazard to be corrected.
, 9. Which communication method is generally preferred when using hand
signals?
A. Random gestures
B. Standardized signals recognized by the operator
C. Verbal descriptions only
D. Signals created during the lift
Answer: Standardized signals recognized by the operator
Rationale: Standardized signals reduce ambiguity and allow the operator and
signalperson to communicate consistently.
10.Who should establish the communication method before a lift begins?
A. The signalperson alone
B. The operator alone
C. The operator and signalperson as part of the lift planning process
D. Any nearby worker
Answer: The operator and signalperson as part of the lift planning process
Rationale: Both parties need to understand the communication method before
movement starts.
11.A signalperson needs to direct a load toward the east, but the operator is
facing north. What is the best practice?
A. Use the signalperson's personal left and right without explanation
B. Establish the directional convention before the lift
C. Use only verbal signals
D. Allow the operator to determine the direction
Answer: Establish the directional convention before the lift
Rationale: Directional signals must be understood consistently to prevent
unintended crane movement.
12.What should a signalperson do if two people are simultaneously giving
conflicting signals to the operator?
A. Continue signaling normally
B. Allow the operator to choose
