CSP EXAM PREP UPDATED ACTUAL QUESTIONS AND
CORRECT ANSWERS
Question:
________ ____________ is any process to modify risk, which may include avoiding,
reducing, transferring, or accepting the risk.
Answer:
Risk treatment
Question:
The NFPA 704 fire diamond can be found
Answer:
on fixed facility storage tanks and buildings
Question:
An employee pursuing a lawsuit against their employer as a result of being
injured on the job will file in ____________ court.
Answer:
Civil
Question:
There are two categories of workers compensation laws:
Answer:
Compulsory and elective
Question:
What is the conventional definition of a blasting agent?
Answer:
A material that demonstrates adequate stability in a stand-alone condition yet
possesses enough exothermic potential to prompt an explosion when initiated.
Question:
Footlamberts measure
Answer:
visible light.
Question:
Acquired data from two distinct and separate variables is known as
Answer:
bivariate data.
Question:
Sound octaves are conventionally characterized by
(1) with sequential octaves normally differing by a factor of (2).
Answer:
(1) frequency, (2) 2
Question:
Which of the following is not a potential mode of particulate contamination?
Aerosols, Gases, Mists, or Fumes
,Answer:
Gases
Question:
Which of the following graphical tools is typically regarded as the most useful
for clearly illustrating data groups that fall within a particular range?
Answer:
Stem-and-leaf plot
Question:
Which of the following is a detailed and systematic process to evaluate
potential risks associated with the design and operation of a multifaceted,
complex technology?
Answer:
Probabilistic risk assessment
Question:
A group of individuals meets within an organization to discuss potential tools
for assessing a wide range of workplace system hazards. One person suggests
a simultaneous, timed-events plotting analysis. What is the likeliest area of
expertise of this individual?
Answer:
Safety engineering
Question:
Which is the best way to control mold from growing in a building and
becoming a health hazard?
Answer:
Address water leaks as quickly as possible
Question:
A contract worker is how many more times likely to have an accident than a
permanent worker?
Answer:
2x as likely
Question:
What type of effect occurs when the combined effect of two chemicals
interfere with each other?
Answer:
Antagonistic
Question:
When conducting audits, what is one of the primary responsibilities of the
auditor?
Answer:
State and clarify the audit re-quirements
Question:
What are the customary confidence levels?
Answer:
90%, 95%, 99%, 99.9%
,Question:
Carcinogenic agents contact and enter the body via which three main sites of
contact?
Answer:
Skin, mouth, and lungs
Question:
Which type of insurance covers the legal liability of business firms and other
organizations that arise out of property damage or bodily injury to others?
Answer:
General liability
Question:
Reducing hazardous noise exposure among employees is an important
component to a hearing conservation program. Which of the following
statements is most accurate regarding equipment design and noise levels?
Answer:
Belts are generally associated with lower noise levels than gears
Question:
Which task is responsible for the most injuries caused by robots in proximity
to operators?
Answer:
Programming
Question:
What type of sprinkler system is generally used when there is no danger of the
pipes freezing?
Answer:
Wet pipe sprinkler system
Question:
What are the five ways to reduce risk during design, commonly referred to as
the order of precedence?
Answer:
Design to eliminate or minimize the hazard, guard the hazard, give a warning,
pro-vide procedures, training, and provide personal equipment
Question:
Components of noise control may be stratified according to controlling noise
at the source, in the pathway, or at the receiver. What is the best example of
controlling noise in the pathway?
Answer:
Increase distance between the noise source and the worker
Question:
What are the key principles of an occupational health and safety management
system?
Answer:
Constant improvement to increase efficiency, minimization of human and
material damages, and constant ed-
ucation and mediation of re-cent scientific research
, Question:
What is the definition of systems biology?
Answer:
Field that seeks to integrate different levels of information to understand how
biological systems function
Question:
Which format provides the ability to recode data to other formats?
Answer:
Ratio
Question:
Employees who work at a HAZWOPER site, but are not potentially exposed
over any applicable permissible exposure limit, must have a minimum of 24
hours of offsite instruction. How much field experience is required?
Answer:
1 day
Question:
What is the purpose of epidemiologic research measurements?
Answer:
Developing disease inter-ventions within groups
Question:
What are three options for managing hazardous waste?
Answer:
Storage and disposal, re-duce production, and treatment
Question:
What is flocculation?
Answer:
The coalescence of particles in a tank through mixing and bonding
Question:
What term describes how risks are assessed?
Answer:
Risk scoring system
Question:
Which ionizing radiation source has the least powerful penetrating ability?
Answer:
Alpha particles
Question:
What is the main purpose of a business impact analysis?
Answer:
Provides an understanding of the critical processes that enable an
organization to achieve its objectives and provides information needed to plan
the organizational response to a disruptive event
Question:
What is a method of performing an initial hazard analysis?
CORRECT ANSWERS
Question:
________ ____________ is any process to modify risk, which may include avoiding,
reducing, transferring, or accepting the risk.
Answer:
Risk treatment
Question:
The NFPA 704 fire diamond can be found
Answer:
on fixed facility storage tanks and buildings
Question:
An employee pursuing a lawsuit against their employer as a result of being
injured on the job will file in ____________ court.
Answer:
Civil
Question:
There are two categories of workers compensation laws:
Answer:
Compulsory and elective
Question:
What is the conventional definition of a blasting agent?
Answer:
A material that demonstrates adequate stability in a stand-alone condition yet
possesses enough exothermic potential to prompt an explosion when initiated.
Question:
Footlamberts measure
Answer:
visible light.
Question:
Acquired data from two distinct and separate variables is known as
Answer:
bivariate data.
Question:
Sound octaves are conventionally characterized by
(1) with sequential octaves normally differing by a factor of (2).
Answer:
(1) frequency, (2) 2
Question:
Which of the following is not a potential mode of particulate contamination?
Aerosols, Gases, Mists, or Fumes
,Answer:
Gases
Question:
Which of the following graphical tools is typically regarded as the most useful
for clearly illustrating data groups that fall within a particular range?
Answer:
Stem-and-leaf plot
Question:
Which of the following is a detailed and systematic process to evaluate
potential risks associated with the design and operation of a multifaceted,
complex technology?
Answer:
Probabilistic risk assessment
Question:
A group of individuals meets within an organization to discuss potential tools
for assessing a wide range of workplace system hazards. One person suggests
a simultaneous, timed-events plotting analysis. What is the likeliest area of
expertise of this individual?
Answer:
Safety engineering
Question:
Which is the best way to control mold from growing in a building and
becoming a health hazard?
Answer:
Address water leaks as quickly as possible
Question:
A contract worker is how many more times likely to have an accident than a
permanent worker?
Answer:
2x as likely
Question:
What type of effect occurs when the combined effect of two chemicals
interfere with each other?
Answer:
Antagonistic
Question:
When conducting audits, what is one of the primary responsibilities of the
auditor?
Answer:
State and clarify the audit re-quirements
Question:
What are the customary confidence levels?
Answer:
90%, 95%, 99%, 99.9%
,Question:
Carcinogenic agents contact and enter the body via which three main sites of
contact?
Answer:
Skin, mouth, and lungs
Question:
Which type of insurance covers the legal liability of business firms and other
organizations that arise out of property damage or bodily injury to others?
Answer:
General liability
Question:
Reducing hazardous noise exposure among employees is an important
component to a hearing conservation program. Which of the following
statements is most accurate regarding equipment design and noise levels?
Answer:
Belts are generally associated with lower noise levels than gears
Question:
Which task is responsible for the most injuries caused by robots in proximity
to operators?
Answer:
Programming
Question:
What type of sprinkler system is generally used when there is no danger of the
pipes freezing?
Answer:
Wet pipe sprinkler system
Question:
What are the five ways to reduce risk during design, commonly referred to as
the order of precedence?
Answer:
Design to eliminate or minimize the hazard, guard the hazard, give a warning,
pro-vide procedures, training, and provide personal equipment
Question:
Components of noise control may be stratified according to controlling noise
at the source, in the pathway, or at the receiver. What is the best example of
controlling noise in the pathway?
Answer:
Increase distance between the noise source and the worker
Question:
What are the key principles of an occupational health and safety management
system?
Answer:
Constant improvement to increase efficiency, minimization of human and
material damages, and constant ed-
ucation and mediation of re-cent scientific research
, Question:
What is the definition of systems biology?
Answer:
Field that seeks to integrate different levels of information to understand how
biological systems function
Question:
Which format provides the ability to recode data to other formats?
Answer:
Ratio
Question:
Employees who work at a HAZWOPER site, but are not potentially exposed
over any applicable permissible exposure limit, must have a minimum of 24
hours of offsite instruction. How much field experience is required?
Answer:
1 day
Question:
What is the purpose of epidemiologic research measurements?
Answer:
Developing disease inter-ventions within groups
Question:
What are three options for managing hazardous waste?
Answer:
Storage and disposal, re-duce production, and treatment
Question:
What is flocculation?
Answer:
The coalescence of particles in a tank through mixing and bonding
Question:
What term describes how risks are assessed?
Answer:
Risk scoring system
Question:
Which ionizing radiation source has the least powerful penetrating ability?
Answer:
Alpha particles
Question:
What is the main purpose of a business impact analysis?
Answer:
Provides an understanding of the critical processes that enable an
organization to achieve its objectives and provides information needed to plan
the organizational response to a disruptive event
Question:
What is a method of performing an initial hazard analysis?
