1|Page
NCCER IRONWORKER QUESTIONS AND VERIFIED ANSWERS
100% PASS GUARANTEED!!!
ASSUMING A GRIP DISTANCE OF 1", WHAT IS THE MINIMUN LENGTH OF THE BOLT REQUIRED FOR
A 3/4" DIAMETER BOLT? -Answer ✔✔- 2 1/4"
THE LOCATION OF BRIDGING DEPENDS ON THE LENGTH OF THE: -Answer ✔✔- SPAN
BEFORE BUNDLES OF DECK CAN BE LANDED ON A BAR JOIST, WHAT ACTION MUST BE
COMPLETED? -Answer ✔✔- JOIST MUST HAVE BRIDGING INSTALLED
WHEN MATERIALS ARE BEING HOISTED TO AN UPPER LEVEL, A TAG LINE IS USED TO: -Answer
✔✔- HELP CONTROL THE LOAD
ITEMS SUCH AS FIELD WELDING INSTRUCTIONS, HANGERS, AND CONNECTION DETAILS ARE
GENERALLY FOUND ON: -Answer ✔✔- THE DETAIL DRAWINGS
THE ABILITY OF A STRUCTURAL STEEL COMPONENT TO RESIST PULLING FORCES IS KNOWN AS: -
Answer ✔✔- TENSILE STRENGHT
WHAT TYPE OF DECKING HAS IMPRESSIONS FORMED ON ITS RIB? -Answer ✔✔- COMPOSITE
DECK
THE GROUND FLOOR ELEVATION IS SHOWN AS +100.25. THE ROOF TOP ELEVATION IS SHOWN AS
+130.50. WHAT IS THE DIFFERENCE IN ELEVATION? -Answer ✔✔- 30'3
SUCCESS!!!
, 2|Page
IN WHAT DRAWING WOULD ONE FIND THE CORRECT BOLT SIZE FOR A BEAM BEING BOLTED? -
Answer ✔✔- DETAIL DRAWING
WHAT SHOULD ALWAYS BE USED TO IGNITE A CUTTING TORCH? -Answer ✔✔- STRIKER
EQUILIZING THE WEIGHT OF THE LOAD AT VARIOUS LIFTING POINTS IS CALLED: -Answer ✔✔-
CONFIGURATION
A COMBINATION SQUARE WITHOUT A PROTRACTOR HEAD IS USED TO LAYOUT: -Answer ✔✔-
45 DEGREE LINES
PRIOR TO INSPECTION IT IS GOOD PRACTICE TO TEST ALL STUDS WITH WHAT METHOD? -Answer
✔✔- PING TEST
WHERE IS THE FULCRUM OR PIVOT POINT ON A FORKLIFT? -Answer ✔✔- THE FRONT AXLE
A DOCUMENT THAT OUTLINES WEIGHTS,CRANE CONFIGURATION AND RIGGING REQUIREMENTS
FOR A LIFT IS CALLED AN: -Answer ✔✔- LIFT PLAN
WHERE CAN THE BOLTING METHODS REGARDING STRUCTURAL STEEL USUALLY BE FOUND ? -
Answer ✔✔- IN THE GENERAL NOTES OF THE STRUCTURAL DRAWINGS
WHEN ESTABLISHING ELEVATIONS OF STRUCTURAL STEEL MEMBERS, THE REFERENCE POINT
USED TO DETERMINE ALL OTHER ELEVATIONS IS CALLED? -Answer ✔✔- THE BENCHMARK
WHAT IS THE SURFACE AREA OF A RECTANGLE WITH THE DIMENSIONS OF 30'6" TALL AND 6 FEET
WIDE? -Answer ✔✔- 183FT
SUCCESS!!!
NCCER IRONWORKER QUESTIONS AND VERIFIED ANSWERS
100% PASS GUARANTEED!!!
ASSUMING A GRIP DISTANCE OF 1", WHAT IS THE MINIMUN LENGTH OF THE BOLT REQUIRED FOR
A 3/4" DIAMETER BOLT? -Answer ✔✔- 2 1/4"
THE LOCATION OF BRIDGING DEPENDS ON THE LENGTH OF THE: -Answer ✔✔- SPAN
BEFORE BUNDLES OF DECK CAN BE LANDED ON A BAR JOIST, WHAT ACTION MUST BE
COMPLETED? -Answer ✔✔- JOIST MUST HAVE BRIDGING INSTALLED
WHEN MATERIALS ARE BEING HOISTED TO AN UPPER LEVEL, A TAG LINE IS USED TO: -Answer
✔✔- HELP CONTROL THE LOAD
ITEMS SUCH AS FIELD WELDING INSTRUCTIONS, HANGERS, AND CONNECTION DETAILS ARE
GENERALLY FOUND ON: -Answer ✔✔- THE DETAIL DRAWINGS
THE ABILITY OF A STRUCTURAL STEEL COMPONENT TO RESIST PULLING FORCES IS KNOWN AS: -
Answer ✔✔- TENSILE STRENGHT
WHAT TYPE OF DECKING HAS IMPRESSIONS FORMED ON ITS RIB? -Answer ✔✔- COMPOSITE
DECK
THE GROUND FLOOR ELEVATION IS SHOWN AS +100.25. THE ROOF TOP ELEVATION IS SHOWN AS
+130.50. WHAT IS THE DIFFERENCE IN ELEVATION? -Answer ✔✔- 30'3
SUCCESS!!!
, 2|Page
IN WHAT DRAWING WOULD ONE FIND THE CORRECT BOLT SIZE FOR A BEAM BEING BOLTED? -
Answer ✔✔- DETAIL DRAWING
WHAT SHOULD ALWAYS BE USED TO IGNITE A CUTTING TORCH? -Answer ✔✔- STRIKER
EQUILIZING THE WEIGHT OF THE LOAD AT VARIOUS LIFTING POINTS IS CALLED: -Answer ✔✔-
CONFIGURATION
A COMBINATION SQUARE WITHOUT A PROTRACTOR HEAD IS USED TO LAYOUT: -Answer ✔✔-
45 DEGREE LINES
PRIOR TO INSPECTION IT IS GOOD PRACTICE TO TEST ALL STUDS WITH WHAT METHOD? -Answer
✔✔- PING TEST
WHERE IS THE FULCRUM OR PIVOT POINT ON A FORKLIFT? -Answer ✔✔- THE FRONT AXLE
A DOCUMENT THAT OUTLINES WEIGHTS,CRANE CONFIGURATION AND RIGGING REQUIREMENTS
FOR A LIFT IS CALLED AN: -Answer ✔✔- LIFT PLAN
WHERE CAN THE BOLTING METHODS REGARDING STRUCTURAL STEEL USUALLY BE FOUND ? -
Answer ✔✔- IN THE GENERAL NOTES OF THE STRUCTURAL DRAWINGS
WHEN ESTABLISHING ELEVATIONS OF STRUCTURAL STEEL MEMBERS, THE REFERENCE POINT
USED TO DETERMINE ALL OTHER ELEVATIONS IS CALLED? -Answer ✔✔- THE BENCHMARK
WHAT IS THE SURFACE AREA OF A RECTANGLE WITH THE DIMENSIONS OF 30'6" TALL AND 6 FEET
WIDE? -Answer ✔✔- 183FT
SUCCESS!!!
