answers 100% 2026
chapter 1 - Correct Answers
A primary objective of hunter education programs is - Correct Answers produce knowledgeable
responsible and involved hunters
Name three hunting-related projects for which the Federal Aid in Wildlife Restoration Act
(Pittman-Robertson Act) provides funding - Correct Answers 1)Hunter safety
2)land acquisition
3)habitat improvement
Which of these is not a source of hunter education funding? - Correct Answers State highway
department
Name three behaviors of a responsible hunter - Correct Answers 1) Courtesy
2) Respect of others
3) Obey hunting laws
chapter 2 - Correct Answers
The three basic parts of a modern firearm are - Correct Answers Action, stock, barrel
Look on page 105 under Ch 2 questions, write down the parts of the rifle in the short answer
section labeled as A,B,C,D - Correct Answers 1) stock
2) sight
3)trigger
, 4) muzzle
The component in ammunition that ignites the gunpowder when struck by the firing pin is the -
Correct Answers Primer
The action of a firearm is made up of parts that - Correct Answers load, unload, fire and eject
the cartridge or shot shell
You should use only ammunition that exactly matches the caliber or gauge specifications
marked on the ________ of your firearm. - Correct Answers barrel
List 6 types of firearm actions - Correct Answers 1) bolt
2) lever
3) pump
4) semi-automatic
5) break/hinge
6) revolving
A safety is located around the receiver of the firearm and the - Correct Answers is a device that
blocks the action to prevent accidental firng
The most accurate sight for a firearm is the - Correct Answers telescope
The design feature that causes a bullet to spiral, which increases accuracy and distance, is called
- Correct Answers rifling
_________ is a measure related to the diameter of the bore ad the size of the shotshell
designed for that bore. - Correct Answers gauge