Plumbing Journeyman Exam 2026–2027 | Complete Study
Guide, Practice Questions, Verified Answers & Exam Prep
True (IPC 425.4) - correct answers -A 4-inch by 3-inch closet bend shall be acceptable. T/F
10 (IPC 403.1) - correct answers -What is the minimum number of toilets in an educational facility men's
room if the facility enrolls 500 people?
accessable - correct answers -"Drinking fountains shall be located on a/an ____________ route."
2" (IPC 406.2) - correct answers -What is the minimum waste connection for an automatic clothes
washer?
30", 56" (IPC 405.3.1) - correct answers -Water closet compartments shall be not less than _____ inches
in width and _____ inches in depth for wall-hung water closets.
approved (IPC 402.1) - correct answers -Plumbing fixtures shall be constructed of _______________
materials.
12", 60" (IPC 405.3.5) - correct answers -The walls or partitions shall begin at a height not greater than
_____ inches from and extend not less than _____ inches above the finished floor surface.
False, 120 degrees (IPC 412.5) - correct answers -The hot water supplied to bathtubs and whirlpool
bathtubs shall be limited to not greater than 110°F. T/F
30", 60" (IPC 405.3.1) - correct answers -Water closet compartments shall be not less than _____ inches
in width and not less than _____ inches in depth for floor-mounted water closets.
1
, 1/4" (IPC 421.3) - correct answers -Removable shower strainers openings shall not be less than _______
inches in least dimension.
1 1/4" (IPC 419.3) - correct answers -What is the minimum waste connection for a lavatory?
2' (IPC 413.3) - correct answers -What is the minimum waste connection for a floor drain?
True (IPC 405.4) - correct answers -The (toilet) flange shall be attached to the drain and anchored to the
structure. T/F
30 (IPC 405.3.5) - correct answers -The horizontal dimension between walls or partitions at each urinal
shall be not less than _____ inches.
prohibited - correct answers -Any water closet that permits siphonage of the contents of the bowl back
into the tank shall be __________. Trough urinals shall be __________. T/F
two (IPC 403.1.3) - correct answers -Where _________ or more toilet rooms are provided for each sex,
the required number oflavatories shall be distributed proportionately to the required number of water
closets.
False. 120 degrees (IPC 412.10) - correct answers -Head shampoo sink faucets shall be supplied with hot
water that is limited to not more than 110°F (49°C) by a water-temperature-limiting device. T/F
1 1/2" (IPC 407.2) - correct answers -What is the minimum waste connection for a bathtub?
2
Guide, Practice Questions, Verified Answers & Exam Prep
True (IPC 425.4) - correct answers -A 4-inch by 3-inch closet bend shall be acceptable. T/F
10 (IPC 403.1) - correct answers -What is the minimum number of toilets in an educational facility men's
room if the facility enrolls 500 people?
accessable - correct answers -"Drinking fountains shall be located on a/an ____________ route."
2" (IPC 406.2) - correct answers -What is the minimum waste connection for an automatic clothes
washer?
30", 56" (IPC 405.3.1) - correct answers -Water closet compartments shall be not less than _____ inches
in width and _____ inches in depth for wall-hung water closets.
approved (IPC 402.1) - correct answers -Plumbing fixtures shall be constructed of _______________
materials.
12", 60" (IPC 405.3.5) - correct answers -The walls or partitions shall begin at a height not greater than
_____ inches from and extend not less than _____ inches above the finished floor surface.
False, 120 degrees (IPC 412.5) - correct answers -The hot water supplied to bathtubs and whirlpool
bathtubs shall be limited to not greater than 110°F. T/F
30", 60" (IPC 405.3.1) - correct answers -Water closet compartments shall be not less than _____ inches
in width and not less than _____ inches in depth for floor-mounted water closets.
1
, 1/4" (IPC 421.3) - correct answers -Removable shower strainers openings shall not be less than _______
inches in least dimension.
1 1/4" (IPC 419.3) - correct answers -What is the minimum waste connection for a lavatory?
2' (IPC 413.3) - correct answers -What is the minimum waste connection for a floor drain?
True (IPC 405.4) - correct answers -The (toilet) flange shall be attached to the drain and anchored to the
structure. T/F
30 (IPC 405.3.5) - correct answers -The horizontal dimension between walls or partitions at each urinal
shall be not less than _____ inches.
prohibited - correct answers -Any water closet that permits siphonage of the contents of the bowl back
into the tank shall be __________. Trough urinals shall be __________. T/F
two (IPC 403.1.3) - correct answers -Where _________ or more toilet rooms are provided for each sex,
the required number oflavatories shall be distributed proportionately to the required number of water
closets.
False. 120 degrees (IPC 412.10) - correct answers -Head shampoo sink faucets shall be supplied with hot
water that is limited to not more than 110°F (49°C) by a water-temperature-limiting device. T/F
1 1/2" (IPC 407.2) - correct answers -What is the minimum waste connection for a bathtub?
2
