DM G+1 EVALUATION TESTQUESTIONS AND
ANSWERS SET A+
✔✔The design of strap beam shows that the reinforcement is more in the _____
A: bottom
B: mid
C: Top
D: All same - ✔✔Top
✔✔After how many days can we remove the shuttering of 3.75mx4.75m room slab?
A: 14 days
B: 7 days
C: 28 days
D: 10 days - ✔✔10 days
✔✔Expansion joints are provided in big structure to avoid ____
A: sound effect
B: Earth quake effect
C: wind effect
D: thermal effect or cracks - ✔✔thermal effect or cracks
✔✔Tests for bearing capacity of soil used is/are _____
A: plate load test
B: SPT
C: cone penetration
D: All - ✔✔All
✔✔In Cantilever beam the tension side is the _____
A: bottom
B: mid
C: face
D: top - ✔✔top
, ✔✔Which test is used to determine the bearing capacity of piles?
A: Dynamic formula
B: static formula
C: pile load test
D: All - ✔✔All
✔✔For plastering the exposed blocks wall the mortar should be of ratio____
A: 1:2
B: 1:3
C: 1:5
D: 1:4 - ✔✔1:4
✔✔The doors used in residential buildings should be fire rated up to _____
A: MI30
B: Mi100
C: MI120
D: MI60 - ✔✔MI60
✔✔The finished surface of the flat roof should have a slope of _____ for effective
drainage.
A: 1 in 5
B: 1 in 30
C: 1 in 10
D: 1 in 20 - ✔✔1 in 20
✔✔For stairs the sum of tread and rise must lie between _____mm
A: 300-350
B: 300-500
C: 600-650
D: 400-450 mm, - ✔✔400-450
✔✔The horizontal member for supporting the common rafter in sloping roof is ____
A: cleat
B: batten
C: strut
D: purlin - ✔✔purlin
✔✔The bearing capacity of waterlogged soil can be improved by ____
A: compacting the soil
B: depth increase
C: grouting
D: draining the soil - ✔✔draining the soil
ANSWERS SET A+
✔✔The design of strap beam shows that the reinforcement is more in the _____
A: bottom
B: mid
C: Top
D: All same - ✔✔Top
✔✔After how many days can we remove the shuttering of 3.75mx4.75m room slab?
A: 14 days
B: 7 days
C: 28 days
D: 10 days - ✔✔10 days
✔✔Expansion joints are provided in big structure to avoid ____
A: sound effect
B: Earth quake effect
C: wind effect
D: thermal effect or cracks - ✔✔thermal effect or cracks
✔✔Tests for bearing capacity of soil used is/are _____
A: plate load test
B: SPT
C: cone penetration
D: All - ✔✔All
✔✔In Cantilever beam the tension side is the _____
A: bottom
B: mid
C: face
D: top - ✔✔top
, ✔✔Which test is used to determine the bearing capacity of piles?
A: Dynamic formula
B: static formula
C: pile load test
D: All - ✔✔All
✔✔For plastering the exposed blocks wall the mortar should be of ratio____
A: 1:2
B: 1:3
C: 1:5
D: 1:4 - ✔✔1:4
✔✔The doors used in residential buildings should be fire rated up to _____
A: MI30
B: Mi100
C: MI120
D: MI60 - ✔✔MI60
✔✔The finished surface of the flat roof should have a slope of _____ for effective
drainage.
A: 1 in 5
B: 1 in 30
C: 1 in 10
D: 1 in 20 - ✔✔1 in 20
✔✔For stairs the sum of tread and rise must lie between _____mm
A: 300-350
B: 300-500
C: 600-650
D: 400-450 mm, - ✔✔400-450
✔✔The horizontal member for supporting the common rafter in sloping roof is ____
A: cleat
B: batten
C: strut
D: purlin - ✔✔purlin
✔✔The bearing capacity of waterlogged soil can be improved by ____
A: compacting the soil
B: depth increase
C: grouting
D: draining the soil - ✔✔draining the soil