JLTV TEST EXAM STUDY GUIDE LATEST 2026 UPDATED
QUESTIONS AND VERIFIED 100% SOLUTIONS (2026/2027)
GRADE: A+|STATUS: GUARANTEED PASS
What is the purpose of (RPM) control? - Answers -D. It prevents slipping and sliding on soft soil
road conditions
When driving a JLTV equipped with tire chains, why is it desirable to allow the chains to creep or
move on the tires? - Answers -B. It reduces the possibility of the chain links gouging into the
tires
Which CTIS setting would you use to operate in standard soft sand conditions? - Answers -C.
MSS
Explain how operating in mud can degrade the JLTV's performance - Answers -Mud can get into
vital parts of the vehicle such as the radiator and cause damage.
When traversing through sand, snow, or mud, which of the following driving techniques is
recommended? - Answers -B. Keep a steady throttle and momentum
Why must your setting be configured properly BEFORE driving on soft soils? - Answers -Without
the proper configuration there is a good chance of it getting stuck.
1|Page
, What is the key difference between driving on flat terrain and slopes? - Answers -D. Traction
The independent suspension of the JLTV uses __ and hydraulic damping to keep the tires in
contact with the ground over varying terrain - Answers -C. high pressure gas shocks
As a JLTV driver, what must you do before beginning to ascend a steep slope? Select all that
apply. - Answers -A. Assess the terrain and available traction B. Choose the safest route D.
Choose proper gearing
What mode should CTIS be in for ascending a 60% grade? - Answers -B. CC
You are preparing to climb a 60% grade and traction is limited. You choose to set the transaxle
to low range. What steps must you follow to put the transaxle in low range? Select all that
apply. - Answers -A. Select AXLE LOCK B. Put transmission in neutral D. Allow vehicle to move
slightly forward or backward to complete the range change.
When first leaving a paved, or improved surface to go off road, what CTIS setting should you
select - Answers -B. Cross Country
Before negotiating any obstacle, what settings need to be configured? Select all that apply -
Answers -A.CTIS B. Transaxle C.Suspension
2|Page
QUESTIONS AND VERIFIED 100% SOLUTIONS (2026/2027)
GRADE: A+|STATUS: GUARANTEED PASS
What is the purpose of (RPM) control? - Answers -D. It prevents slipping and sliding on soft soil
road conditions
When driving a JLTV equipped with tire chains, why is it desirable to allow the chains to creep or
move on the tires? - Answers -B. It reduces the possibility of the chain links gouging into the
tires
Which CTIS setting would you use to operate in standard soft sand conditions? - Answers -C.
MSS
Explain how operating in mud can degrade the JLTV's performance - Answers -Mud can get into
vital parts of the vehicle such as the radiator and cause damage.
When traversing through sand, snow, or mud, which of the following driving techniques is
recommended? - Answers -B. Keep a steady throttle and momentum
Why must your setting be configured properly BEFORE driving on soft soils? - Answers -Without
the proper configuration there is a good chance of it getting stuck.
1|Page
, What is the key difference between driving on flat terrain and slopes? - Answers -D. Traction
The independent suspension of the JLTV uses __ and hydraulic damping to keep the tires in
contact with the ground over varying terrain - Answers -C. high pressure gas shocks
As a JLTV driver, what must you do before beginning to ascend a steep slope? Select all that
apply. - Answers -A. Assess the terrain and available traction B. Choose the safest route D.
Choose proper gearing
What mode should CTIS be in for ascending a 60% grade? - Answers -B. CC
You are preparing to climb a 60% grade and traction is limited. You choose to set the transaxle
to low range. What steps must you follow to put the transaxle in low range? Select all that
apply. - Answers -A. Select AXLE LOCK B. Put transmission in neutral D. Allow vehicle to move
slightly forward or backward to complete the range change.
When first leaving a paved, or improved surface to go off road, what CTIS setting should you
select - Answers -B. Cross Country
Before negotiating any obstacle, what settings need to be configured? Select all that apply -
Answers -A.CTIS B. Transaxle C.Suspension
2|Page
