ECS Network Infrastructure Awareness and Installation Standards
Study online at https://quizlet.com/_jpv8ii
1. What is the purpose of the ECS Network To provide a qualification for assisting with
Infrastructure Awareness Assessment? network infrastructure projects.
2. What is the pass mark for the ECS Net- 24 out of 30 questions (80%).
work Infrastructure Awareness Assess-
ment?
3. What must delegates provide before sit- Photographic identification, National Insur-
ting the assessment? ance Number, and a valid personal email ad-
dress.
4. What is the maximum length of a Class 90 meters.
Ea permanent link?
5. What is the correct Euro Class for installa- Cca-s1b,d2,a2.
tion cables that meet minimum fire per-
formance requirements?
6. Which type of cable produces the least B2Ca s1a d1 a1.
amount of smoke when burning?
7. Which of the following is NOT a Telecom- 3 core 13 amp 230 volt mains cable.
munication cable?
8. What type of cables shall be used for UV resistant cables with weather resistant out-
installation outside buildings? er sheaths.
9. What is the maximum length of a Class 90 meters.
Ea channel with patch cords exceeding
20 meters?
10. What is the role of the installer regarding The installer is responsible for ensuring the
cable selection? correct cable type is installed.
, ECS Network Infrastructure Awareness and Installation Standards
Study online at https://quizlet.com/_jpv8ii
11. What is the assessment format for the 30 multiple choice questions to be completed
ECS Network Infrastructure Awareness in 45 minutes.
Assessment?
12. What should be done if a delegate is un- They may take a new assessment after prepa-
successful in the assessment? ration.
13. What is the responsibility of the designer The designer is responsible for specifying the
regarding cable specification? correct cable.
14. What is the significance of the CPR and It ensures the right cable type is installed in
EuroClass system? the right areas.
15. What is the requirement for cables in- They must have extra protection from sunlight
stalled outside buildings? and extreme weather.
16. What is the correct answer for the fire A Installation cables shall meet Euro Class
performance requirement of telecom- Cca-s1b,d2,a2.
munication cables?
17. What is the minimum cross-sectional 16 mm2
area for rack bonding conductors for a
cabinet of > 21 U?
18. What is the minimum cross-sectional 2.5 mm2
area for a wall mounted 12 U communi-
cation cabinet's earth bond?
19. Which ethernet standard is supported by 100baseT
Cat 5e?
20. What cable type should be installed to Fibre Optic cable
supply a 10 Gbs link over 500 meters?
, ECS Network Infrastructure Awareness and Installation Standards
Study online at https://quizlet.com/_jpv8ii
21. What cable type should be installed to Single-mode fibre optic cable
supply a 10 Gbs link over 2000 meters?
22. Which of the following is NOT a standard 100/125
size of fibre optic cable?
23. What does the 'CPR' in the construction Construction Product Regulations
industry stand for?
24. What does the 'DoP' in the construction Declaration of Performance
industry stand for?
25. What does CE marking indicate? Conformity with health, safety and environ-
mental protection standards
26. What is the minimum bend radius for Eight times the cable diameter
4-pair balanced cables according to
BSEN 50174-2?
27. What is the minimum bend radius for Twelve times the cable diameter
optical fibre cables and coaxial cables ac-
cording to BSEN 50174-2?
28. What is the height of 1U in a 19 inch rack? 44.45 mm or 1.75 inches
29. What does a cable management system Ducts and tubes housing information technol-
include? ogy cables
30. What should not be used as support for Grids of suspended ceilings
pathway systems according to best prac-
tices?
31. In accordance with BS 50174-2
Study online at https://quizlet.com/_jpv8ii
1. What is the purpose of the ECS Network To provide a qualification for assisting with
Infrastructure Awareness Assessment? network infrastructure projects.
2. What is the pass mark for the ECS Net- 24 out of 30 questions (80%).
work Infrastructure Awareness Assess-
ment?
3. What must delegates provide before sit- Photographic identification, National Insur-
ting the assessment? ance Number, and a valid personal email ad-
dress.
4. What is the maximum length of a Class 90 meters.
Ea permanent link?
5. What is the correct Euro Class for installa- Cca-s1b,d2,a2.
tion cables that meet minimum fire per-
formance requirements?
6. Which type of cable produces the least B2Ca s1a d1 a1.
amount of smoke when burning?
7. Which of the following is NOT a Telecom- 3 core 13 amp 230 volt mains cable.
munication cable?
8. What type of cables shall be used for UV resistant cables with weather resistant out-
installation outside buildings? er sheaths.
9. What is the maximum length of a Class 90 meters.
Ea channel with patch cords exceeding
20 meters?
10. What is the role of the installer regarding The installer is responsible for ensuring the
cable selection? correct cable type is installed.
, ECS Network Infrastructure Awareness and Installation Standards
Study online at https://quizlet.com/_jpv8ii
11. What is the assessment format for the 30 multiple choice questions to be completed
ECS Network Infrastructure Awareness in 45 minutes.
Assessment?
12. What should be done if a delegate is un- They may take a new assessment after prepa-
successful in the assessment? ration.
13. What is the responsibility of the designer The designer is responsible for specifying the
regarding cable specification? correct cable.
14. What is the significance of the CPR and It ensures the right cable type is installed in
EuroClass system? the right areas.
15. What is the requirement for cables in- They must have extra protection from sunlight
stalled outside buildings? and extreme weather.
16. What is the correct answer for the fire A Installation cables shall meet Euro Class
performance requirement of telecom- Cca-s1b,d2,a2.
munication cables?
17. What is the minimum cross-sectional 16 mm2
area for rack bonding conductors for a
cabinet of > 21 U?
18. What is the minimum cross-sectional 2.5 mm2
area for a wall mounted 12 U communi-
cation cabinet's earth bond?
19. Which ethernet standard is supported by 100baseT
Cat 5e?
20. What cable type should be installed to Fibre Optic cable
supply a 10 Gbs link over 500 meters?
, ECS Network Infrastructure Awareness and Installation Standards
Study online at https://quizlet.com/_jpv8ii
21. What cable type should be installed to Single-mode fibre optic cable
supply a 10 Gbs link over 2000 meters?
22. Which of the following is NOT a standard 100/125
size of fibre optic cable?
23. What does the 'CPR' in the construction Construction Product Regulations
industry stand for?
24. What does the 'DoP' in the construction Declaration of Performance
industry stand for?
25. What does CE marking indicate? Conformity with health, safety and environ-
mental protection standards
26. What is the minimum bend radius for Eight times the cable diameter
4-pair balanced cables according to
BSEN 50174-2?
27. What is the minimum bend radius for Twelve times the cable diameter
optical fibre cables and coaxial cables ac-
cording to BSEN 50174-2?
28. What is the height of 1U in a 19 inch rack? 44.45 mm or 1.75 inches
29. What does a cable management system Ducts and tubes housing information technol-
include? ogy cables
30. What should not be used as support for Grids of suspended ceilings
pathway systems according to best prac-
tices?
31. In accordance with BS 50174-2
