Network Infrastructure (IT 2035C)
Study online at https://quizlet.com/_99t0ry
1. Network requirements are identified Plan
2. Logical and physical design requirements gathered Design
3. Put design into effect Implement
4. Identify and resolves problems Optimize
5. Take out of production Retire
6. Final test for effectiveness Operate
7. Is important to understand the corporate structure Characterize traffic flow
when developing a network topology in order to Locate major user com-
__________ (select all correct responses) . munities
Determine who the deci-
sion makers are
8. A set of switched segments based on a particular Lay- LAN
er 2 protocol such as Fast Ethernet and an interswitch
trunking protocol such as the IEEE 802.1Q standard.
9. A large and diverse network, consisting of campuses, Enterprise network
remote-access services, and one or more WANs or
long-range LANs. Also called an internetwork.
10. A LAN or WAN that uses unguided medium (rather Wireless network
than a cable).
11. A geographically dispersed network including WAN
point-to-point, Frame Relay, ATM, and other long-dis-
tance connections.
12. Campus network
, Network Infrastructure (IT 2035C)
Study online at https://quizlet.com/_99t0ry
Multiple buildings within a local geographical area
(within a few miles), usually connected to a cam-
pus-backbone network.
13. A single network bounded by a switch or router and Segment
based on a particular Layer 1 and Layer 2 protocol
such as Fast Ethernet.
14. Multiple LANs within a building, usually connected to Building network
a building-backbone network
15. Networking solutions that support individual remote Remote Access
users or small remote branch offices accessing the
network.
16. Network Layer 3
17. Data Link Layer 2
18. Session Layer 5
19. Application Layer 7
20. Transport Layer 4
21. Presentation Layer 6
22. Physical Layer 1
23. The amount of time average delay varies delay variation
24. Sum of all the data that all network nodes have ready offered load
to send at a particular time
25. accuracy
Study online at https://quizlet.com/_99t0ry
1. Network requirements are identified Plan
2. Logical and physical design requirements gathered Design
3. Put design into effect Implement
4. Identify and resolves problems Optimize
5. Take out of production Retire
6. Final test for effectiveness Operate
7. Is important to understand the corporate structure Characterize traffic flow
when developing a network topology in order to Locate major user com-
__________ (select all correct responses) . munities
Determine who the deci-
sion makers are
8. A set of switched segments based on a particular Lay- LAN
er 2 protocol such as Fast Ethernet and an interswitch
trunking protocol such as the IEEE 802.1Q standard.
9. A large and diverse network, consisting of campuses, Enterprise network
remote-access services, and one or more WANs or
long-range LANs. Also called an internetwork.
10. A LAN or WAN that uses unguided medium (rather Wireless network
than a cable).
11. A geographically dispersed network including WAN
point-to-point, Frame Relay, ATM, and other long-dis-
tance connections.
12. Campus network
, Network Infrastructure (IT 2035C)
Study online at https://quizlet.com/_99t0ry
Multiple buildings within a local geographical area
(within a few miles), usually connected to a cam-
pus-backbone network.
13. A single network bounded by a switch or router and Segment
based on a particular Layer 1 and Layer 2 protocol
such as Fast Ethernet.
14. Multiple LANs within a building, usually connected to Building network
a building-backbone network
15. Networking solutions that support individual remote Remote Access
users or small remote branch offices accessing the
network.
16. Network Layer 3
17. Data Link Layer 2
18. Session Layer 5
19. Application Layer 7
20. Transport Layer 4
21. Presentation Layer 6
22. Physical Layer 1
23. The amount of time average delay varies delay variation
24. Sum of all the data that all network nodes have ready offered load
to send at a particular time
25. accuracy
