Maryland Construction Health and
Safety Technician Exam Practice
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. What is the primary regulatory body responsible for developing and
administering the Construction Health and Safety Technician (CHST)
certification exam?
A. Occupational Safety and Health Administration (OSHA)
B. National Institute for Occupational Safety and Health (NIOSH)
C. Board of Certified Safety Professionals (BCSP)
D. American National Standards Institute (ANSI)
The CHST certification exam is developed and administered by the Board of
Certified Safety Professionals (BCSP), which sets eligibility requirements,
exam content, and credentialing standards for construction safety
professionals.
2. Which of the following best describes the minimum experience
requirement for eligibility to sit the CHST exam?
A. One year of general construction work experience
B. Two years of OSHA compliance inspection experience
C. Four years of engineering safety education
,D. Three years of construction safety, health, and environmental
experience with at least 35% of duties in safety functions
CHST candidates must demonstrate at least three years of construction
safety experience, and a significant portion of their job responsibilities
must involve safety-related duties, typically at least 35%.
3. The CHST exam primarily focuses on which of the following
competency areas?
A. Structural engineering design and blueprint drafting
B. Financial auditing and project cost estimation
C. Electrical installation code compliance
D. Construction safety, hazard identification, and risk control
The CHST exam is designed to evaluate knowledge of construction safety
practices, including hazard recognition, risk control measures, and safe
worksite management.
4. Which OSHA document is most commonly used to track workplace
injuries and illnesses on construction sites?
A. OSHA 1910 Manual
B. OSHA Hazard Communication Standard
C. OSHA Form 3000 Safety Plan
D. OSHA 300 Log
The OSHA 300 Log is the standard recordkeeping document used to
document work-related injuries and illnesses in compliance with OSHA
requirements.
5. A key responsibility of a Construction Health and Safety Technician in
site auditing includes:
A. Designing architectural blueprints for compliance
B. Approving payroll for subcontractors
C. Managing project procurement logistics
, D. Identifying hazards and recommending corrective actions during
inspections
Site auditing involves inspecting job sites, identifying unsafe conditions,
and recommending corrective measures to reduce risk.
6. Which principle is most important when conducting effective safety
training for adult workers on construction sites?
A. Memorization of legal codes only
B. Passive listening without interaction
C. Strict theoretical instruction without practice
D. Application of real-world examples and interactive learning techniques
Adult learning principles emphasize practical relevance, engagement, and
real-life examples to improve understanding and retention.
7. Which of the following is considered a major focus of construction site
coordination?
A. Designing architectural structures
B. Managing corporate tax compliance
C. Scheduling national labor union elections
D. Coordinating multiple contractors and ensuring unified safety
compliance
Site coordination ensures that multiple employers and subcontractors
follow consistent safety rules and communicate effectively on shared
worksites.
8. What is the main purpose of a Site-Specific Safety Plan (SSSP)?
A. To calculate project profit margins
B. To assign legal liability for accidents
C. To replace OSHA regulations entirely
D. To identify and control hazards unique to a specific jobsite
Safety Technician Exam Practice
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. What is the primary regulatory body responsible for developing and
administering the Construction Health and Safety Technician (CHST)
certification exam?
A. Occupational Safety and Health Administration (OSHA)
B. National Institute for Occupational Safety and Health (NIOSH)
C. Board of Certified Safety Professionals (BCSP)
D. American National Standards Institute (ANSI)
The CHST certification exam is developed and administered by the Board of
Certified Safety Professionals (BCSP), which sets eligibility requirements,
exam content, and credentialing standards for construction safety
professionals.
2. Which of the following best describes the minimum experience
requirement for eligibility to sit the CHST exam?
A. One year of general construction work experience
B. Two years of OSHA compliance inspection experience
C. Four years of engineering safety education
,D. Three years of construction safety, health, and environmental
experience with at least 35% of duties in safety functions
CHST candidates must demonstrate at least three years of construction
safety experience, and a significant portion of their job responsibilities
must involve safety-related duties, typically at least 35%.
3. The CHST exam primarily focuses on which of the following
competency areas?
A. Structural engineering design and blueprint drafting
B. Financial auditing and project cost estimation
C. Electrical installation code compliance
D. Construction safety, hazard identification, and risk control
The CHST exam is designed to evaluate knowledge of construction safety
practices, including hazard recognition, risk control measures, and safe
worksite management.
4. Which OSHA document is most commonly used to track workplace
injuries and illnesses on construction sites?
A. OSHA 1910 Manual
B. OSHA Hazard Communication Standard
C. OSHA Form 3000 Safety Plan
D. OSHA 300 Log
The OSHA 300 Log is the standard recordkeeping document used to
document work-related injuries and illnesses in compliance with OSHA
requirements.
5. A key responsibility of a Construction Health and Safety Technician in
site auditing includes:
A. Designing architectural blueprints for compliance
B. Approving payroll for subcontractors
C. Managing project procurement logistics
, D. Identifying hazards and recommending corrective actions during
inspections
Site auditing involves inspecting job sites, identifying unsafe conditions,
and recommending corrective measures to reduce risk.
6. Which principle is most important when conducting effective safety
training for adult workers on construction sites?
A. Memorization of legal codes only
B. Passive listening without interaction
C. Strict theoretical instruction without practice
D. Application of real-world examples and interactive learning techniques
Adult learning principles emphasize practical relevance, engagement, and
real-life examples to improve understanding and retention.
7. Which of the following is considered a major focus of construction site
coordination?
A. Designing architectural structures
B. Managing corporate tax compliance
C. Scheduling national labor union elections
D. Coordinating multiple contractors and ensuring unified safety
compliance
Site coordination ensures that multiple employers and subcontractors
follow consistent safety rules and communicate effectively on shared
worksites.
8. What is the main purpose of a Site-Specific Safety Plan (SSSP)?
A. To calculate project profit margins
B. To assign legal liability for accidents
C. To replace OSHA regulations entirely
D. To identify and control hazards unique to a specific jobsite
