TEXAS OSHA SAFETY CERTIFICATION
EXAM WITH ACTUAL QUESTIONS AND
VERIFIED ANSWERS, PLUS EXPLAINED
RATIONALES/EXPERT VERIFIED FOR
GUARANTEED 100% PASS 2026/LATEST
UPDATE/INSTANT DOWNLOAD PDF
1. A construction crew is installing structural steel on a multi-story
building. According to OSHA requirements, which action best
complies with fall protection standards for employees working at
heights?
A. Require hard hats only
B. Provide fall protection when employees are working at 6 feet or more
above a lower level
C. Allow experienced workers to decide whether they need fall
protection
D. Require safety glasses instead of fall protection
Answer: B. Provide fall protection when employees are working at 6
feet or more above a lower level
Rationale: OSHA's construction standards generally require fall
protection at elevations of 6 feet or higher. Acceptable systems include
guardrails, safety nets, or personal fall arrest systems. Hard hats and
safety glasses do not protect against falls.
2. Under OSHA's General Duty Clause, employers are required to:
A. Eliminate every possible hazard regardless of feasibility
B. Provide a workplace free from recognized hazards likely to cause
death or serious physical harm
1
,C. Guarantee employees will never be injured
D. Only follow state safety rules
Answer: B. Provide a workplace free from recognized hazards likely
to cause death or serious physical harm
Rationale: Section 5(a)(1) of the Occupational Safety and Health Act
requires employers to furnish a workplace free of recognized hazards
capable of causing serious injury or death when no specific OSHA
standard applies.
3. Which OSHA standard primarily governs Hazard Communication?
A. 29 CFR 1910.1200
B. 29 CFR 1910.147
C. 29 CFR 1910.134
D. 29 CFR 1910.95
Answer: A. 29 CFR 1910.1200
Rationale: Hazard Communication Standard (HazCom) requires
chemical labeling, Safety Data Sheets (SDSs), employee training, and
hazard communication programs.
4. Which section must always appear on every Safety Data Sheet
(SDS)?
A. Employee payroll information
B. Product identification
C. Insurance policy number
D. Purchase order history
Answer: B. Product identification
2
,Rationale: Section 1 of every OSHA-compliant SDS identifies the
chemical, manufacturer, recommended use, and emergency contact
information.
5. What is the first step in Lockout/Tagout (LOTO) procedures?
A. Remove all locks
B. Notify affected employees and prepare for shutdown
C. Restart equipment
D. Perform maintenance immediately
Answer: B. Notify affected employees and prepare for shutdown
Rationale: Before shutting down equipment, authorized employees must
notify affected workers, identify energy sources, and prepare for proper
isolation.
6. Which type of fire extinguisher is appropriate for energized
electrical fires?
A. Class A
B. Class B
C. Class C
D. Class K
Answer: C. Class C
Rationale: Class C extinguishers are specifically rated for energized
electrical equipment because they use nonconductive extinguishing
agents.
7. OSHA requires employers to record work-related injuries and
illnesses on which form?
3
, A. OSHA Form 300
B. IRS Form W-2
C. OSHA Form 100
D. EPA Form 450
Answer: A. OSHA Form 300
Rationale: OSHA Form 300 is the Log of Work-Related Injuries and
Illnesses used to record qualifying workplace incidents.
8. What does the acronym PPE stand for?
A. Personal Protection Equipment
B. Personal Protective Equipment
C. Professional Protective Equipment
D. Personal Prevention Equipment
Answer: B. Personal Protective Equipment
Rationale: PPE includes equipment such as helmets, gloves, eye
protection, hearing protection, respirators, and protective footwear
designed to minimize workplace hazards.
9. Which respirator filters airborne particulates but does not supply
oxygen?
A. SCBA
B. Air-line respirator
C. Air-purifying respirator
D. Escape hood
Answer: C. Air-purifying respirator
Rationale: Air-purifying respirators remove contaminants from ambient
air but cannot be used in oxygen-deficient atmospheres.
4
EXAM WITH ACTUAL QUESTIONS AND
VERIFIED ANSWERS, PLUS EXPLAINED
RATIONALES/EXPERT VERIFIED FOR
GUARANTEED 100% PASS 2026/LATEST
UPDATE/INSTANT DOWNLOAD PDF
1. A construction crew is installing structural steel on a multi-story
building. According to OSHA requirements, which action best
complies with fall protection standards for employees working at
heights?
A. Require hard hats only
B. Provide fall protection when employees are working at 6 feet or more
above a lower level
C. Allow experienced workers to decide whether they need fall
protection
D. Require safety glasses instead of fall protection
Answer: B. Provide fall protection when employees are working at 6
feet or more above a lower level
Rationale: OSHA's construction standards generally require fall
protection at elevations of 6 feet or higher. Acceptable systems include
guardrails, safety nets, or personal fall arrest systems. Hard hats and
safety glasses do not protect against falls.
2. Under OSHA's General Duty Clause, employers are required to:
A. Eliminate every possible hazard regardless of feasibility
B. Provide a workplace free from recognized hazards likely to cause
death or serious physical harm
1
,C. Guarantee employees will never be injured
D. Only follow state safety rules
Answer: B. Provide a workplace free from recognized hazards likely
to cause death or serious physical harm
Rationale: Section 5(a)(1) of the Occupational Safety and Health Act
requires employers to furnish a workplace free of recognized hazards
capable of causing serious injury or death when no specific OSHA
standard applies.
3. Which OSHA standard primarily governs Hazard Communication?
A. 29 CFR 1910.1200
B. 29 CFR 1910.147
C. 29 CFR 1910.134
D. 29 CFR 1910.95
Answer: A. 29 CFR 1910.1200
Rationale: Hazard Communication Standard (HazCom) requires
chemical labeling, Safety Data Sheets (SDSs), employee training, and
hazard communication programs.
4. Which section must always appear on every Safety Data Sheet
(SDS)?
A. Employee payroll information
B. Product identification
C. Insurance policy number
D. Purchase order history
Answer: B. Product identification
2
,Rationale: Section 1 of every OSHA-compliant SDS identifies the
chemical, manufacturer, recommended use, and emergency contact
information.
5. What is the first step in Lockout/Tagout (LOTO) procedures?
A. Remove all locks
B. Notify affected employees and prepare for shutdown
C. Restart equipment
D. Perform maintenance immediately
Answer: B. Notify affected employees and prepare for shutdown
Rationale: Before shutting down equipment, authorized employees must
notify affected workers, identify energy sources, and prepare for proper
isolation.
6. Which type of fire extinguisher is appropriate for energized
electrical fires?
A. Class A
B. Class B
C. Class C
D. Class K
Answer: C. Class C
Rationale: Class C extinguishers are specifically rated for energized
electrical equipment because they use nonconductive extinguishing
agents.
7. OSHA requires employers to record work-related injuries and
illnesses on which form?
3
, A. OSHA Form 300
B. IRS Form W-2
C. OSHA Form 100
D. EPA Form 450
Answer: A. OSHA Form 300
Rationale: OSHA Form 300 is the Log of Work-Related Injuries and
Illnesses used to record qualifying workplace incidents.
8. What does the acronym PPE stand for?
A. Personal Protection Equipment
B. Personal Protective Equipment
C. Professional Protective Equipment
D. Personal Prevention Equipment
Answer: B. Personal Protective Equipment
Rationale: PPE includes equipment such as helmets, gloves, eye
protection, hearing protection, respirators, and protective footwear
designed to minimize workplace hazards.
9. Which respirator filters airborne particulates but does not supply
oxygen?
A. SCBA
B. Air-line respirator
C. Air-purifying respirator
D. Escape hood
Answer: C. Air-purifying respirator
Rationale: Air-purifying respirators remove contaminants from ambient
air but cannot be used in oxygen-deficient atmospheres.
4
