1|Page
ILLINOIS FIRE INSPECTOR II CERTIFICATION
EXAMINATION COMPLETE VERIFIED QUESTIONS
AND DETAILED SOLUTIONS NEWEST UPDATE THIS
YEAR JUST RELEASED
To be approved, a proposal to modify an existing NFPA
code or standard must: - Answer-Receive approval by two-
thirds majority of eligible committee members.
Recommending modifications to codes and standards is a
formal process. It required specific documentation and
guidelines. All of the statements about filling out proposal
form are TRUE EXCEPT: - Answer-The form must be
typed or legibly printed in blue ink.
Identify one factor that may negatively affect your time
management skills. - Answer-Interruptions
The three functional areas of a Fire Inspector II's duties
are administration, field inspection, and: - Answer-Plans
review.
,2|Page
Welding permits must clearly explain the conditions under
which they are issued. This typically includes what actions
are being allowed, what guidelines must be followed, and:
- Answer-The timeframe for which the permit has been
issued.
What action should a fire inspector take if the conditions of
the permit are NOT met by the permit applicant? - Answer-
Revoke the permit.
Plans review applications: - Answer-Vary from jurisdiction
to jurisdiction.
Treating citizens with courtesy and genuine interest are
important aspects of handling complaints because they: -
Answer-Encourage citizen support for fire prevention.
When handling a complaint, the final step is: - Answer-
Following up.
Identify one of the following sections that does NOT
belong in an SOP? - Answer-Conclusion
,3|Page
If a candidate fails a portion of the performance test, the
candidate will have an opportunity to retake that portion of
the test within: - Answer-90 calendar days.
All of the following statements about performance testing
are TRUE EXCEPT that it: - Answer-Describes diminished
performance standards.
As you approach the new zoo, something about the fire
lane leading up to the main building seems off to you. You
get out your tape measure and take measurements.
Which statement would you put in your inspection report
as a deficiency? - Answer-The entrance gate only allows a
vertical clearance of 12 feet, 6 inches (3.8 meters).
Look at the emergency access shown and determine
what, if anything, on the construction plan does not meet
requirements. - Answer-Paved access must be within 33
feet of the building.
Here's an easy one if you've been paying attention. New
facilities four stories and higher must have all-weather
aerial apparatus ground access surface on a MINIMUM of:
- Answer-Two sides of the building.
, 4|Page
All of the following statements about the duties of a fire
inspector are TRUE EXCEPT: - Answer-A fire inspector
must prepare the budget for the fire prevention office.
Specifies fire codes and standards that are adopted and
implemented by all DoD fire departments - Answer-UFC 3-
600-01
Establishes the foundation for fire prevention and
education programs - Answer-DoD Instruction 6055.6
Before issuing a welding permit, a fire inspector should: -
Answer-Perform a site visit to ensure it meets the
requirements of NFPA 51 B.
A fire watch is required for welding operations if
combustible materials are located within what distance of
welding operation? - Answer-35 feet
Who must provide contact and logistical information on the
plans review application? - Answer-The Applicant
ILLINOIS FIRE INSPECTOR II CERTIFICATION
EXAMINATION COMPLETE VERIFIED QUESTIONS
AND DETAILED SOLUTIONS NEWEST UPDATE THIS
YEAR JUST RELEASED
To be approved, a proposal to modify an existing NFPA
code or standard must: - Answer-Receive approval by two-
thirds majority of eligible committee members.
Recommending modifications to codes and standards is a
formal process. It required specific documentation and
guidelines. All of the statements about filling out proposal
form are TRUE EXCEPT: - Answer-The form must be
typed or legibly printed in blue ink.
Identify one factor that may negatively affect your time
management skills. - Answer-Interruptions
The three functional areas of a Fire Inspector II's duties
are administration, field inspection, and: - Answer-Plans
review.
,2|Page
Welding permits must clearly explain the conditions under
which they are issued. This typically includes what actions
are being allowed, what guidelines must be followed, and:
- Answer-The timeframe for which the permit has been
issued.
What action should a fire inspector take if the conditions of
the permit are NOT met by the permit applicant? - Answer-
Revoke the permit.
Plans review applications: - Answer-Vary from jurisdiction
to jurisdiction.
Treating citizens with courtesy and genuine interest are
important aspects of handling complaints because they: -
Answer-Encourage citizen support for fire prevention.
When handling a complaint, the final step is: - Answer-
Following up.
Identify one of the following sections that does NOT
belong in an SOP? - Answer-Conclusion
,3|Page
If a candidate fails a portion of the performance test, the
candidate will have an opportunity to retake that portion of
the test within: - Answer-90 calendar days.
All of the following statements about performance testing
are TRUE EXCEPT that it: - Answer-Describes diminished
performance standards.
As you approach the new zoo, something about the fire
lane leading up to the main building seems off to you. You
get out your tape measure and take measurements.
Which statement would you put in your inspection report
as a deficiency? - Answer-The entrance gate only allows a
vertical clearance of 12 feet, 6 inches (3.8 meters).
Look at the emergency access shown and determine
what, if anything, on the construction plan does not meet
requirements. - Answer-Paved access must be within 33
feet of the building.
Here's an easy one if you've been paying attention. New
facilities four stories and higher must have all-weather
aerial apparatus ground access surface on a MINIMUM of:
- Answer-Two sides of the building.
, 4|Page
All of the following statements about the duties of a fire
inspector are TRUE EXCEPT: - Answer-A fire inspector
must prepare the budget for the fire prevention office.
Specifies fire codes and standards that are adopted and
implemented by all DoD fire departments - Answer-UFC 3-
600-01
Establishes the foundation for fire prevention and
education programs - Answer-DoD Instruction 6055.6
Before issuing a welding permit, a fire inspector should: -
Answer-Perform a site visit to ensure it meets the
requirements of NFPA 51 B.
A fire watch is required for welding operations if
combustible materials are located within what distance of
welding operation? - Answer-35 feet
Who must provide contact and logistical information on the
plans review application? - Answer-The Applicant
