1|Page
CSA W47.1 Final Exam Questions And Answers with
Explanations Practice Questions with Solutions
Newest | Already Graded A+||Latest Exams!!!
What welding processes are covered in CSA Standard
W59? - ANSWERThis standard covers the SMAW,
GMAW, GTAW, MCAW, FCAW, SAW, ESW, EGW and SW
processes.
Does CSA Standard W59 specify requirements for stud
welding? - ANSWERYes, Clause 6 has requirements for
stud welding.
,2|Page
Does CSA Standard W59 contain provisions for pre-
qualified joints? - ANSWERYes, Clause 10 has details for
the geometry of joints that are prequalified, provided
the welding procedures
What base metals can be welded under CSA Standard
W59? - ANSWERWelding Supervisor - the company's
designated person(s)
directly responsible for ensuring that qualified tack
welders, welders, and welding operators weld in
accordance with approved or accepted welding procedure
data sheets in the shop and the field.
,3|Page
The requirements for welding symbols are specified in
what standard? - ANSWERWelding symbols shall be as
shown in AWS Standard A2.4, together with the additional
conventions developed for CSA Standard W59 and shown
in Annex D of CSA Standard W59.
CSA Standard W59 covers the welding requirements for
what type of steel construction? - ANSWERThe welding
requirements of CSA Standard W59 can be applied to
carbon and low-alloy welded steel
What types of structures are covered in CSA Standard
W59? - ANSWERCSA Standard W59 covers statically-
and cyclically-loaded (repetitive loading) structures.
, 4|Page
What is a low-hydrogen electrode? - ANSWERA low-
hydrogen electrode is an electrode that deposits weld
metal with a specified maximum limit of diffusible
hydrogen.
What are the requirements for contractor certification? -
ANSWERWhen mandated in the contract or in the
governing design Standard*, all Contractors performing
work under this Standard must be certified to CSA W47.1
for welded fabrications.
What information should be given on a design drawing? -
ANSWERA design drawing should contain:
information for preparation of detail and erection drawings;
the effective throat thickness shall be defined, if there are
partial penetration groove welds.
CSA W47.1 Final Exam Questions And Answers with
Explanations Practice Questions with Solutions
Newest | Already Graded A+||Latest Exams!!!
What welding processes are covered in CSA Standard
W59? - ANSWERThis standard covers the SMAW,
GMAW, GTAW, MCAW, FCAW, SAW, ESW, EGW and SW
processes.
Does CSA Standard W59 specify requirements for stud
welding? - ANSWERYes, Clause 6 has requirements for
stud welding.
,2|Page
Does CSA Standard W59 contain provisions for pre-
qualified joints? - ANSWERYes, Clause 10 has details for
the geometry of joints that are prequalified, provided
the welding procedures
What base metals can be welded under CSA Standard
W59? - ANSWERWelding Supervisor - the company's
designated person(s)
directly responsible for ensuring that qualified tack
welders, welders, and welding operators weld in
accordance with approved or accepted welding procedure
data sheets in the shop and the field.
,3|Page
The requirements for welding symbols are specified in
what standard? - ANSWERWelding symbols shall be as
shown in AWS Standard A2.4, together with the additional
conventions developed for CSA Standard W59 and shown
in Annex D of CSA Standard W59.
CSA Standard W59 covers the welding requirements for
what type of steel construction? - ANSWERThe welding
requirements of CSA Standard W59 can be applied to
carbon and low-alloy welded steel
What types of structures are covered in CSA Standard
W59? - ANSWERCSA Standard W59 covers statically-
and cyclically-loaded (repetitive loading) structures.
, 4|Page
What is a low-hydrogen electrode? - ANSWERA low-
hydrogen electrode is an electrode that deposits weld
metal with a specified maximum limit of diffusible
hydrogen.
What are the requirements for contractor certification? -
ANSWERWhen mandated in the contract or in the
governing design Standard*, all Contractors performing
work under this Standard must be certified to CSA W47.1
for welded fabrications.
What information should be given on a design drawing? -
ANSWERA design drawing should contain:
information for preparation of detail and erection drawings;
the effective throat thickness shall be defined, if there are
partial penetration groove welds.
